Laurel Electronics, Inc.
Costa Mesa, CA 92626
Nov 13, 2006 Designed for pulse rates from 0.05 Hz-1 MHz, UL-rated Laureate Model FRR counter can add, subtract, divide, and multiply 2 independently scalable pulse or AC input channels. Universal dual-channel signal conditioner accepts magnetic signals from 12 mV-250 Vac as well as signals from proximity switches with PNP or NPN output, TTL or CMOS logic, and contact closures. Built-in isolated 5, 10, or 24 Vdc excitation supply for powering proximity switches and other sensors is included.

Automated Packaging Systems Inc.
Streetsboro, OH 44241
Nov 03, 2006 Using advanced sensor technology, Accu-Scale® 220 detects and counts products as light as 0.003 oz. Range counting function allows user to select range for number of parts in batch. Upper and lower target counts can be set, and automatic cycling only occurs once value falls within pre-set range. Once programmed batch amount is obtained, system automatically dispenses each batch into pre-opened Autobag bag.

Advantech Automation Corp.
Cincinnati, OH 45240
Oct 09, 2006 Universal PC-bus card, Model PCI-1735U, features 32 TTL-level digital input channels, 32 TTL-level digital output channels, and three 16-bit programmable counter/timer channels. Digital I/O channels use driver/buffer circuits to provide output driving capacity. Card offers low-input loading, user-configurable clock source, and full selection of wiring and signal interface boards.

Alpha-Core, Inc.
Bridgeport, CT 06608
Sep 19, 2006 Model HBC-2 Turns Counter counts turns of magnet wire in transformers, measures turns ratios between primary and secondary windings, and detects presence of shorted turns. Range selector of 1:1 or 1:2 ratio allows count of up to 1,999 or 3,998 turns respectively, and test frequency of 2.5, 12.5, or 50 kHz can be selected, depending on core material. Transformers up to 15 lb can be placed on instrument table, and device includes built-in 800 turn test coil for calibration.

Walls & Forms, Inc.
Dallas, TX 75374-1112
Jul 03, 2006 Available in as few or as many sections as desired, Modular Sales Counter offers front-merchandising and backlit headers. It can be customized for new store interior construction and remodeling projects in desired color combinations, finishes, sizes, and designs to match any store decor. Counter can be dismantled, moved to new location, and reassembled when necessary.

ENM Company
Chicago, IL 60646 6135
Jun 09, 2006 Series T45 Solid State Digital Modules come in 4 versions: T45A2 Trip Odometer, T45A3 Maintenance Hour Meter (1/10), T45A4 Counter, and T45A5 Maintenance Hour Meter (1/100). Featuring 2-channel design with resettable second channel, all models have 7-digit, 7-segment LCD display and operate from 8-28 Vdc (backlight from 9-15 Vdc) in -40 to +85°C temperatures with ±0.01% accuracy. Available with black or chrome bezels, standard unit has yellow-green (570 nm) backlight.

NJM/CLI Packaging Systems Int'l.
Lebanon, NH 03766 1403
Feb 14, 2006 Occupying 24 ft footprint, 16-track CF1620-4 Cremer Quad features 4 counting heads and 4-lane filling conveyor with servo-driven infeed divider and servo-driven collection device. PC-based system provides color touchscreen control panel with password-protected access and Ethernet connectivity. It handles tablets, caplets, and hard or soft capsules from 2-25 mm in dia and accommodates plastic and glass containers from 30-2,000 cc.

Control Company
Friendswood, TX 77546
Feb 13, 2006 With display that reads to 99,999, water-resistant Digital Counter features O-ring-sealed and shock-resistant ABS plastic case. Counter is electronic, with solid-state construction that eliminates gear and miscount problems. Tactile click buttons provide positive action, and fail-safe design eliminates accidental reset. Measuring 2 5/8 x 1 2/3 x 5/6 in., battery-powered unit weighs 1 oz and provides over 2 years of continuous operation.

Baumer Ltd.
Southington, CT 06489 1534
Oct 18, 2005 Programmable SCATEC-10 and SCATEC-15 sensors, designed for non-contact counting, can also be used in applications involving lap or shingle stream counting. Both include keypad, LCD display, additional connector, and retro-reflective device that counts separated sheets. Able to be connected to computer for remote control and programming, products come with ScaDiag software and can detect sheets down to 0.1 or 0.15 mm at rates to 1.5 million copies/hr.

Hoyt Electrical Instrument Works, Inc.
Penacook, NH 03303 8798
Sep 19, 2005 Multifunctional EZM-4450 (1/16 DIN), EZM-7750 (1/8 DIN), EZM-4950 (1/8 DIN), and EZM-9950 (¼ DIN) can count up on 1 or 2 channels or subtract one from the other. Equipped with two 6-digit displays and on-board sensor power supply, products accept NPN, PNP, encoder, or dry contact input signals; have 2 set points, and communicate via RS-232 serial communication (MODBUS) or optional RS-485. Time range is programmable from 0.01 sec to 999.99 hr.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
May 05, 2005 Integrated into AMP applicators, EDGE Counter displays cycles since installation to track tool usage and optimize maintenance scheduling. On-counter LCD display and EDGE Counter Software Pack provide access to operation counts and other applicator statistics. Tool enables operators to perform applicator maintenance and tool replacement at measured intervals with pre-set limits. Counter and software use wireless IR technology to transfer data.

Geotest - Marvin Test Systems, Inc.
Irvine, CA 92614-5846
Apr 14, 2005 With 14 pre-defined measurement functions, GC22x0 Series features internal clock source, programmable ARM source, and microprocessor. Model GC2210 measures frequencies from DC to 225 MHz with 9-digit resolution, while GC2220 measures from DC to 1.3 GHz with 100 pS resolution. Each input channel is programmable for 1 Megohm or 50 ohm input impedance. Able to determine any frequency to 0.1 ppm in 1 ms, GC2230 covers frequencies up to 2.0 GHz.

NJM/CLI Packaging Systems Int'l.
Lebanon, NH 03766 1403
Feb 24, 2005 Made of stainless steel with polished 316 contact parts, Cremer CF1220D features 2 counting heads and 2-lane filling conveyor in 12 ft footprint. It uses IR detection, which is unaffected by dust, filling up to 110 bottle/min (based on 100-count bottles). Counter features touch-screen control panel and can be programmed with up to 300 product recipes. It handles tablets, caplets, and hard or soft capsules ranging from 2–25 mm in diameter.

Kernco Instruments Co., Inc.
El Paso, TX 79927 7338
Feb 24, 2005 Model DT-2235 hand-held LCD Digital Tachometer comes with accessories to measure rotational and lineal speeds up to 10,000. Solid-state and battery operated model comes with memory feature to retain last reading for recall purposes. Unit weighs 10 oz, measures 6¾ x 2-7/8 x 1½ in., and operates off 4 AA batteries for approximately 20 hr of continuous operation.

WeightWatchers.com
New York, NY 10106
Jan 27, 2005 Compatible with Palm OS-based handhelds, Weight Watchers® On-the-Goâ„¢ tracks food consumption and exercise when at restaurants, grocery stores, or gyms. It delivers food lists with over 25,000 items from brand name groceries to menu items from national restaurant chains. Product synchronizes entries between handheld and WeightWatchers.com account, with tracker keeping tabs on food and exercise and POINTS calculator that helps users make smart meal choices.

Elscint Automation
Pune 411026  India
Nov 19, 2004 Automatic system counts small parts such as plastic caps, spouts, screws, and rivets in addition to heavy parts such as anchor bolts, bearing races, and metal sockets. Equipment consists of vibratory bowl feeder, sensing device, and electronic, resettable, 10-digit counter. Counting speed ranges up to 1,000 parts/min, and counting automatically stops once preset number is reached. Restart can be manual or automatic via signal.

Automated Packaging Systems Inc.
Streetsboro, OH 44241
Nov 11, 2004 Autobag Accu-Count® 100 and 200 count and batch at speeds up to 2,500 packages/hr. Available with 3 bowl configurations, Accu-Count 200 utilizes vibratory bowl feed and count system and is capable of detecting and counting product measuring 1/8 in. dia x 1/8–2.5 in. long x 2 in wide. Accu-Count 100 utilizes batch accumulator and similar features of Accu-Count 200. Both incorporate AutoTouchâ„¢ Control Screen and Individual Part Profiling function.

Fargo Controls, Inc.
Eatontown, NJ 07724
Oct 01, 2004 Panel-mounted series CH and TH Counters and Timers include 7-digit LCD display with push-button reset. CH counters accept non-voltage contact closure/NPN open collector, PNP 6-24 Vdc or 90-240 V ac/dc inputs, and offer one count per pulse function. TH timers accept non-voltage contact closure/NPN open collector or 90-240 V ac/dc inputs, and are available with timing function of minutes or hours.

Redington Counters Inc.
Windsor, CT 06095
Jul 20, 2004 Manufactured from impact-resistant plastic, Model E2 electronic 4-digit Hand Tally counter has no moving parts and produces audible beep that signals each count in order to prevent miscounts. Product is suited for any application where items need to be counted and recorded. Specific uses include inventory control, attendance monitoring, traffic recording, and lab work.

Redington Counters Inc.
Windsor, CT 06095
Jul 19, 2004 Offered in 4 industry style housings, NEMA 4x Model 33 features always-on 0.28 in. display. Unit operates on 10–277 Vdc and 20–277 Vac, and ac voltage range is not frequency sensitive. Totally sealed construction protects against ingress of dirt and moisture and enables use in environments with adverse conditions. Hour-meter unit runs indicator-blinking decimal point. Clip retainer mount and screws are supplied.