Manncorp
Willow Grove, PA 19090
Oct 21, 2009 Supplied inside aluminum carrying case, MegaXP portable component counter can be used for incoming/outgoing order verification or off-premises inventory taking. It will count as fast as operator can turn hand crank, up to 10,000 cph, and employs rechargeable battery-powered sensor. In addition to RS-232 link to optional adhesive label printer, unit comes with built-in accessories compartment contains hand crank, battery charger, and shoulder strap.

LSI Computer Systems, Inc.
Melville, NY 11747
Jul 27, 2009 Operating over voltage range of 3-5.5 V, 32-bit Model LS7366R with SPI decodes and counts quadrature clocks directly from incremental encoders, offering solution to position and displacement tracking at 40 x 106/sec line rate from encoder and count limit of 232. Unit can also operate with non-quadrature clock signals and provides various counting modes for signal conditioning. Programming and communications between IC and host controller are made with 4 instructions.

Dwyer Instruments, Inc.
Michigan City, IN 46361 0373
Mar 26, 2009 Series LCT216 features easy to read display that shows both desired set point and current process value, along with operating mode that control is functioning in. Unit also offers 14 pre-programmed timer functions, and counting functions include 1- or 2-stage counting along with batch, total, or dual counting modes. When used as tachometer, device is able to measure rotational speeds.

Berkeley Nucleonics Corp.
San Rafael, CA 94901
Feb 17, 2009 Featuring 12 digits of frequency resolution and 40 ps of time interval resolution, Model 1105 offers built-in statistics and math functions that may be used when analyzing display mean, min/max, delta, and standard deviations. Real-time DSP accelerates measurement, while scale and offset can be used to compensate for systematic occurrences. Measurement capabilities cover Rise/Fall Time, Phase, Event Count, Voltage Peak, Time Interval, Frequency (6 GHz), Pulse Width, and Duty Cycle.

Spinwave Systems,Inc.
Westford, MA 01886
Aug 04, 2008 Designed for energy management, submetering, building systems monitoring, and demand response applications, wireless pulse counter replicates pulses of up to 4 m and has transmission range of up to 3,500 ft. It supports both alkaline and lithium batteries for extended battery life in extreme temperature environments. Device resists RF interference with frequency agility, which enables unit to change frequencies rapidly whenever it encounters interference.

Redington Counters Inc.
Windsor, CT 06095
Jun 20, 2008 Offered in variety of totally sealed SAE and NEMA 4X, 12 compliant housings in both ac and dc voltages, Models 722/732 Electromechanical Hour Meters operate in any environment. Rugged unit is suited for use in variety of industrial ac/dc applications, such as control panels, generators, and outdoor power equipment.

Eurotech Group
AMARO (Udine) 33020  Italy
May 02, 2008 Providing means for statistical or data interpretation, PCN-1001 performs bi-directional detection and counting of passengers in public transportation vehicles. Non-contact stereoscopic vision detection, along with interpretation algorithm, result in counting accuracy over 97% across all lighting conditions. Parallel operation of multiple counters in daisy-chained configuration is possible, and counters can work together in real-time with overlapping areas and active detection.

SICK, Inc.
Minneapolis, MN 55438
Mar 27, 2008 Suited for part counting and leading edge detection on conveyors, HLG Light Grid Sensors are through-beam style switching light grids that do not need any external controller box. Units come in rugged aluminum housing which can withstand punishing industrial environments. Cable synchronization provides quick setup and product detection, while teach-in automatic sensitivity adjustment allows for detection of translucent objects and wrappings for precise detection.

ENM Company
Chicago, IL 60646 6135
Mar 27, 2008 Powered by replaceable internal battery and measuring 3.65 x 2.20 x 0.80 in., Series L17 Electronic Hand Tally counts both up and down and can be reset with push of button. Audible sound option to signal counting can be turned on and off, and battery will last approximately 2 yr with sound turned off.

Manncorp
Willow Grove, PA 19090
Nov 27, 2007 Comprised of motorized surface mount parts counter, bar code reader, and laser label printer, 2000 Pro will process 7 or 13 in. reel containing 5,000 taped parts with pitches of 2-32 mil in approximately 90 sec. System cuts time-consuming task of inventory tallies by providing almost immediate read-outs and printouts. Users can detect shortages by scanning bar code on reel, verifying count, then printing new bar code identity label with current quantity, date, and time.

Signal-Tech
Erie, PA 16509
Nov 15, 2007 Red Storm can detect when a vehicle enters, exits, or moves from level to level in any parking facility, and incorporates signs that display available spaces in real time. Fully scalable, upgradeable, wireless differential counter can be configured to fit layout of any parking facility and and accommodate any traffic flow. Installation package includes 4 sensors/zone, one Red Storm control unit/zone, and optional signs including Overspeed, Caution Vehicle Exiting, and Car Coming signs.

Control Co.
Houston, TX 77258 8307
Nov 12, 2007 Key-Chain/Wrist-Strap/Carabiner Digital Counter features display count to 99,999, 2 yr constant use battery, water-resistant O-ring sealed with shock-resistant ABS plastic case, button click for count confirmation, and recessed no accident reset. Weighing less than 1 oz, it has diameter of 1-7/8 in. and is ½ in. wide.

Laurel Electronics, Inc.
Costa Mesa, CA 92626
Nov 09, 2007 Available for analog, pulse, and serial data signals, G04 Series Large Digit Meters, Counters, Timers and Serial Input Displays come with oversize 4.0 in. digits for long distance viewing in any plant or outdoor environment. Number of digits is 5 for analog or rate signals for readings from -19999 to 99999, and up to 7 for totalizing or for use as serial input remote display with readings from -1999999 to 9999999. Elapsed timer and time-of-day clock configurations are also available.

Abaxis, Inc.
Union City, CA 94587
Sep 24, 2007 VetScan HM5 provides 22-parameter complete blood count and 4 cellular histograms for cat, dog, and horse. It also offers 3-part mode for 7 other species. For operation, this fully automated, 5-part differential cell counter requires operator to enter appropriate patient information, insert well-mixed blood sample, and press Start button. Device requires minimal maintenance and also offers capabilities for database management.

Spinwave Systems,Inc.
Westford, MA 01886
Sep 17, 2007 Pulse counter wirelessly transmits electric, water, and gas meter values to any building automation system for review via software suite, or email notification. Counter features one high-powered radio that connects to signal conditioning module via standard CAT5 cable for data and power transmission. Unit can be line or battery powered using 6 D-Cell batteries. Accumulated pulses and pulses per time are transmitted as BACnet, LON, or Modbus variables.

Laurel Electronics, Inc.
Costa Mesa, CA 92626
Jul 12, 2007 Housed in 35 mm DIN rail case, Laureate Model TA-FRT is powered by 95-240 Vac ±10% or optionally by low voltage 8-28 Vac or 9-37 Vdc. It produces isolated 4-20 mA or 0-10 V output and includes dual-channel signal conditioner, which is suitable for pulse or ac sources, such as NPN or PNP proximity switches, contact closures, magnetic pickups down to 12 mV, or ac voltages up to 250 Vac. Equipped with RS232 port, transmitter is programmed via external PC and Instrument Setup software.

Bronkhorst USA Inc.
Bethlehem, PA 18017
Jul 11, 2007 BRIGHT Series offers local indication and operation, flow rate in actual values/percentage, fluid selection, setpoint, counter, and alarms. Modules are designed for lab-style instruments and for instruments with IP65 housing. Communication between such instruments and product is established over RS-232 digital communication port. OLED display technology offers bright and wide angle visibility. Units can be mounted directly on instrument, adjacent wall/panel, or instrument's pipework.

Laurel Electronics, Inc.
Costa Mesa, CA 92626
May 29, 2007 Custom Curve Linearization option for Laureate digital panel meters and counters is implemented in form of 20 nonlinear spline-fit segments. Typical error will be 0.1-0.01% of full scale, depending on number of data points used for setup, error in data points, and severity of nonlinearities or discontinuities. Setup is accomplished using external PC, RS232 cable, and linearizing software, with spreadsheet, actual input, and polynomial programming methods offered.

Alltec Corporation
Canton, NC 28716
May 14, 2007 Designed to monitor for the incidence of direct lightning strikes, ASC-6X Lightning Strike Counter consists of circuitry containing rectifier, capacitor, and electronic switching system that is connected to mechanical counting relay. Unit is packaged into completely sealed, injection molded case that is waterproof for interior or exterior usage. It has 2 mounting tabs for installing with screws or bolts, and sealed, clear view window allows easy reading of 6 digit counter.

BEI Industrial Encoder Division
Goleta, CA 93117
Feb 22, 2007 When connected to rotary or linear encoder and 12 Vdc power supply, Model SA100 displays either rotational units in decimal degrees or DMS, or linear position in inches and millimeters. Error compensation, zeroing, scaling, count direction, and display resolutions can be set by user via front panel. Suited for open loop applications, device operates out of box and does not require optional plug-in boards or complicated configuration process.