Fargo Controls, Inc.
Eatontown, NJ 07724
May 14, 2004 With protection degree of IP66, CBE 05 and 06 Series mechanical stroke counters are suited for outdoor use and wash down environments. Dust tight products have nylon body and ABS casing. Available with 5 or 6 digits, counter has reset wheel and is offered with left or right shaft rotation and shaft output. Base mounted units have max speed of 1,000 strokes/min. They are suited for continuous processes, automatic machines, and measurements.

KineticSystems Co., LLC
Lockport, IL 60441-2200
Apr 02, 2004 With 8 frequency measurement channels, P635 single-width, 3U module monitors pulse sources in 0.06 Hz to 100 kHz frequency range. Circuitry allows monitoring of varied frequencies without changing module settings. Filtering and hysteresis features ensure noise immunity, and AC or DC coupling of differential inputs is programmable on per-channel basis. Features include TTL inputs, differential input circuits, and programmable observation window.

KEP Co. - Kessler-Ellis Products Co.
Eatontown, NJ 07724
Feb 17, 2004 Model BATRT-M features 5 digits of rate and 8 digits of total. Instrument can be powered from internal battery, external DC supply, or 4—20 mA output loop, and accepts magnetic pickup, DC pulse, and switch-closure inputs. Software lets users create, save, open, download, upload, and print setup information for instrument, as well as view rate and total on PC. BATRT-M is rated for -22 to +158°F operation with accuracy of 0.01% of reading ±1 count.

Autonics USA, Inc.
Vernon Hills, IL 60061
Dec 05, 2003 CT series counter/timer combines functionality of both counter and timer. As counter, it features high-speed input of up to 10K cps, input scaling, and single or dual presets. As timer, it is classified as multi-mode and multi-range. Unit is available in 48 x 48 and 74 x 72 mm packages with 4- and 6-digit dual displays.

B & K Precision Corp.
Placentia, CA 92870
Nov 25, 2003 Hand-held Models 103, 104, 105, and 106 utilize RF and microprocessor circuitry to detect audio/video wireless transmissions. Frequency detection ranges are 1 MHz to 3 GHz, 10 Hz to 3 GHz, 1 MHz to 3 GHz, and 30 MHz to 2.8 GHz, respectively. Users can simultaneously view signal strength on 16-section bargraph and detected frequency on LCD screen. All units include 4 selectable gate speeds, display hold, low battery indicator, and rechargeable NiCd battery pack.

Lighthouse Worldwide Solutions
Medford, OR 97501
Jul 23, 2003 HANDHELD 2016 displays temperature, RH, and up to 6 channels of particle data in cumulative or differential mode. Powered by Lithium Ion battery, unit incorporates 3.8 in. backlit LCD touch-screen display, and may be used as mobile particle monitor or as part of larger facility monitoring system. Able to download data using LMS Express software, product features include 0.1 cfm flow rate, memory for up to 3,000 records, and internal audible alarm.

Protek Test & Measurement
Englewood, NJ 07631
Jul 07, 2003 Model C3100 features RMS-232 capability for PC communications such as time stamp, data logging, and file storage. Duty Cycle, RPM, Time Interval, Period, and optional GPIB interface functions extend unit's applications. Programmable counter plots trend graphs that are viewable on LCD display and generates comparison, relative error, and min/max functions. Operable on line voltages from 85-270 V, unit is supplied with software to run with Window 95, 98, 2000, and ME.

Lighthouse Worldwide Solutions
Medford, OR 97501
Jul 01, 2003 SOLAIR 5100+ portable counter offers sensitivity of 0.5 micron and flow rate of 1.0 cfm with dynamic range up to 25.0 microns. It can store particle count data for 6 particle size channels and data from up to 4 environmental sensors. All data can be downloaded to computer or printed to built-in thermal printer. Sample output is internally filtered to HEPA standards. Unit runs on removable Li-Ion battery or standard AC power.

Lighthouse Worldwide Solutions
Medford, OR 97501
Jul 01, 2003 SOLAIR 3100+ stores particle count data for 6 particle size channels as well as data from up to 4 environmental sensors. Data can be downloaded to computer or printed to built-in thermal printer. Portable counter offers 0.3 micron sensitivity at 1.0 cfm flow rate and has 5.7 in. color touch-screen display. Product utilizes optical particle counting technology and has stainless steel enclosure that houses 32-port universal manifold.

ENM Company
Chicago, IL 60646 6135
Apr 10, 2003 Series T39 6-digit LCD hour meter/counter keeps track of accumulated hours that machine has been on, as well as number of times machine has been turned on and off. Unit counts up and down and stores data on powerless non-volatile data backup, using CMOS EEPROM technology. With no moving parts, it withstands vibration from 10–75 Hz @ 1–8 G.

Automatic Timing & Controls
Lancaster, PA 17605
Feb 05, 2003 Model 3830 SMART Rate/Totalizer panel meter includes up to one Form-A, 5 A and three Form-C, 5 A output relays. Microprocesser-based process controller offers 4 analog outputs or RS 232 serial communication. Active in background or foreground, 6-digit totalizer delivers scaled pulsed output to PLCs or other controllers. Unit is available in various DC voltage or current inputs: 0–5 Vdc, 0–10 Vdc, and 4–20 mA. Aluminum case and NEMA 4 front bezel are standard.

Automatic Timing & Controls
Lancaster, PA 17605
Feb 04, 2003 Model 3870 SMART digital panel meter series, with 6-digit totalizer mode, can incorporate 1 Form-A, 5 A relay output and 3 Form-C, 5 A relay outputs. With 4 analog outputs or RS 232 serial communications, microprocesser-based process controller provides rate measurements with pulse rate inputs as low as 1 pulse per 100 sec. Setup entries include time base scale, offset, and K factor. Offerings include 16-point linearization, NEMA 4 front bezel, and aluminum case.

Dwyer Instruments, Inc.
Michigan City, IN 46361 0373
Nov 19, 2002 Constructed of clear Polysulfone, Series SFI-800 rotor-style flow indicator enables 360° viewing of rotor and is mountable in any orientation. Unit has pressure rating of 150 psi and temperature rating of 212°F. Optional A-711 output sensor has Vdc output, with pulsing for flow totalization and proportional frequency change for flow rate. Unit is constructed of FDA-approved wetted materials and rotor contains no magnets with which to attract ferrous materials.

Fargo Controls, Inc.
Eatontown, NJ 07724
Nov 04, 2002 Heavy-duty, 5-digit Series C 05 has die-cast zamak body and ABS plastic face. Available in stroke, revolution, or rotary type, counter offers quick resetting lever and is available with left or right shaft rotation. Rotary version displays feet, feet and inches, and meters. Base-mounted counter suits automatic machines and measurements. Applications include presses; shearing, tooling, winding, and printing machines; and measuring of cloth/tape/rope.

Electrodynamics, Inc.
  
Sep 06, 2002 Solid-state DDS101 monitors system event activity and has non-volatile memory and event range of 99,999. All connections are made via printed wiring board. Output is serial binary coded decimal format. It is brought to data collection point for system reading or to single dedicated connector. Events are read from counter by mating printed wiring board connections with reader's connector and operating reader. Counter consumes 2 mW power. Operating voltage range is 4.5 to 10 Vdc.

L-3 Communications, Electrodynamics, Inc.
Rolling Meadows, IL 60008
Aug 19, 2002 With non-volatile memory, solid state Model DDS101 has event range of 99,999 events. Its output is serial binary coded decimal format. All connections are made via printed wiring board and output brought to data collection point or to single dedicated connector. Operating temperature range is -65 to +125°C. Unit has life accuracy of ±0.1%, operating voltage range of 4.5 to 10 Vdc, and ripple voltage of 2V peak ripple between 10 Hz and 10 kHz superimposed on 7.0 Vdc.

B & K Precision Corp.
Placentia, CA 92870
Aug 15, 2002 Model 889 Synthesized Bench In-Circuit meter can be used to test inductors, capacitors, and resistors. It makes ac and dc voltage measurements, diode continuity checks, and LCR and ESR measurements at frequencies up to 100 kHz, with basic accuracy of 0.5%. When LCR measurement mode is selected, test frequencies of 100 Hz, 120 Hz, 1 kHz, 10 kHz, or 100 kHz may be selected on all applicable ranges. Dual display permits simultaneous measurements.

Xycom Automation Inc.
Saline, MI 48176
Jun 25, 2002 High-Speed Counter, Single-Axis Positioning, and 32 point I/O units work with company’s GLC and LogiTouch controllers and Flex Network system. High speed counter accepts inputs from rotary encoders using either open collector or line driver connections. Positioning unit provides CW or CCW pulse output for servo or stepping motors. I/O units include 32 point input, 16 point input/16 point output, and 16 point input sink/source and 16 point output source modules.

Biotest Diagnostics Corp.
Denville, NJ 07834
Jun 18, 2002 Computer-programmable, Model P3610 APC Portable Airborne Particle Counter measures up to 6 size ranges down to 0.3 micron at 1 cfm flow rate. Total particles are measured in 3 concentration modes: particles/m³, particles/L and particles/ft³. Model P3610 stores data for up to 1,000 sample locations. Names for each location (up to 22 alphanumeric characters) may be created and stored. Unit includes back-lit LCD touch-screen.

Barton Instrument Systems, LLC
City Of Industry, CA 91749-1882
May 29, 2002 Compact Access® Series includes BA200 rate totalizer, BA212 heat calculator, and intrinsically safe BA214 batch controller. Suitable for remote locations, models include battery, loop, and dc powered versions. All models interface with turbine, positive-displacement, and paddlewheel flowmeters, making them suitable for pipeline and irrigation applications. Each has large LCD, front panel controls, and menu-driven programming for quick and easy setup.