Timers & Clocks, Test & Measuring Instruments

Multi-Range Industrial Timer/Counter offers 10-in-1 functionality.

March 6, 2015

Offering 10 operating modes in one unit, Model 385AR series works with proximity switches, solid state devices, and potential-free contact encoders. Respective input speeds of 3 Hz, 30 Hz, and 5 kHz are standard, and unit incorporates 12 Vdc 30 mA sensor power supply with short circuit protection and options for front panel or remote reset. Supplied in 48 x 48 mm housing featuring 2 SPST (NO) 5 A @ 230 Vac contacts, unit offers dual setpoints, programmable input scaling, and batch counting. Read More

Test & Measuring Instruments

Multi-Analysis System counts particles in oils.

December 12, 2014

With Model CSM 02, users can count particles and solid contamination in hydraulic and lubrication fluids as well as analyze other important oil parameters, such as water saturation, temperature, viscosity, and relative dielectric constant in stationary or mobile applications. In addition, system is suitable for analyzing foamed oils in large gearboxes and flushing test stands. With WSPS 05 and/or IVS 01 sensors, system can provide additional monitoring and preventative maintenance capabilities. Read More

Test & Measuring Instruments

Handheld Particle Counter displays counts in 3 seconds.

November 26, 2014

Completely self-contained with internal battery and sample pump, 4-channel Model 804 allows users to choose from 7 particle sizes ranging from 0.3–10.0 microns. Portable, programmable unit offers user-selectable sampling time up to 1 minute and displays counts in as little as 3 seconds. Capable of storing up to 2,500 records that may be output to spreadsheet format via computer software, counter uses USB interface for data download and field firmware upgrades. Read More

Test & Measuring Instruments

Combination Time/Pulse Meter has DIN rail mount design.

September 24, 2014

Used for field testing and recording of elapsed time and on/off cycles as well as maintenance schedule periods, D9454M1 consists of hour meter and event counter. These two meters are connected in parallel (common connections) in standard version to simultaneously keep track of number of occurrences and time, but meters can also act independently of each other. With IP52 rated front side and resistant to shock, product features 0.16 x 0.067 in. digits and operates from 5 to 122°F. Read More

Test & Measuring Instruments, HVAC, Sensors, Monitors & Transducers

Sensor Monitoring Unit displays key contamination data.

September 23, 2014

In addition to allowing live display of TCM ISO code, TWS water concentration, and fluid temperature, SMU Sensor Monitoring Unit will store data for later retrieval. TestMate® Particle Counter, TPM, can be ordered without internal pump, which can be installed in systems with operating pressures up to 5,000 psi. Pump-less version can also be ordered with Viton® seals allowing unit to be used with Phosphate Ester Fluids. Read More

Test & Measuring Instruments

Large Display Electronic Counter features 6 LED digits.

September 15, 2014

Able to be directly connected to input signal source with up to 1 kHz count speed, G90 Series features 6 LED digits up to 4 in. high x 2.36 in. wide. Counting mode is add/subtract and quadrature with reset accomplished remotely. Operating from 100–240 Vac, counter has built-in memory for count value retention in case of power loss. External 12 Vdc power supply is available for sensors, and other features include decimal point position, free write, and input inhibition. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

LED Seed Sensor accurately counts all seed sizes and types.

August 27, 2014

Designed to count seeding population during planting, Hy Rate Plus™ LED Seed Sensor ensures that row units are working properly and seeds are being placed for optimum yield potential. Closely spaced LEDs virtually eliminate dead zones in seed tube. As seeds pass through light field in sensing tube, proprietary software algorithm learns what seed type is being planted and adjusts detection sensitivity accordingly. Sensor also automatically adjusts detection sensitivity in dusty conditions. Read More

Test & Measuring Instruments

Electronic Counter transmits totals via Ethernet, 4-20 mA outputs.

July 28, 2014

Available in Basic and Extended versions, ETL-rated L60007FR can output totals digitally via Ethernet I/O as well as scaled, isolated 4–20 mA analog signal. Dual channels A and B can be independently scaled to count up from zero (or other value) to preset limit or down from preset value to zero (or other limit). Input flexibility is provided by universal dual-channel signal conditioner, and counter also has built-in isolated 5, 10, or 24 Vdc excitation supply. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Remote Particle Counters feature integrated pump.

June 11, 2014

Designed to eliminate need for external vacuum source, AeroTrak® 6310, 6510, and 6510-VHP feature hot-swap combined particle sensor and blower assembly condensed into 316L stainless steel enclosure. Systems come standard with four 4–20 mA analog inputs that integrate local environmental parameters such as room pressure, temperature, and relative humidity. Environmental data, as well as particle counts, are transmitted back to facility monitoring software via Ethernet or RS 485. Read More

Test & Measuring Instruments

LCD Preset Counter suits maintenance applications.

June 6, 2014

Housed in sealed IP67-rated enclosure, PC12 Series features two 6-digit, 7-segment LCDs with channel 2 programmable by customer. Service LED light informs operator when preset value setting is reached. Accumulated counts are stored on powerless, non-volatile data backup using CMOS EEPROM technology, ensuring that data is saved even during power outage. With key lock feature, unauthorized access to reset and programming functions is prevented. Read More

Test & Measuring Instruments

USB Counter/Timer DAQ Devices offer high-speed operation.

May 29, 2014

Providing high-speed pulse counting with 48 MHz max input frequency, 4-channel USB-CTR04 and 8-channel USB-CTR08 offer programmable resolution up to 64 bits with 8 MBps aggregate scan rate. High-level input modes include totalize, period measurement, pulse-width measurement, and timing measurement. Four independent PWM timer outputs and 8 DIO are also incuded, and timer output channels can operate continuously or for specified pulse count; duty cycle and period can be changed on-the-fly. Read More

Test & Measuring Instruments

ETL-Rated Counter transmits totals via Ethernet and analog output.

May 16, 2014

Model L60007FR can output totals digitally via Ethernet I/O as well as scaled, isolated, 4–20 mA analog signal. Dual channels A and B can be independently scaled to count up from zero or other value to preset limit or to count down from preset value to zero or other limit. Along with Basic and Extended counter versions, features include universal dual-channel signal conditioner; isolated 5, 10, or 24 Vdc excitation supply; and galvanically isolated analog outputs with 2 programmable end points.
Read More

Test & Measuring Instruments, Material Handling & Storage

Inhaler Dose Counter keeps track of remaining medicine.

May 13, 2014

Single Dose Counter, which lets PMDI (pressurized metered dose inhaler) users countdown number of doses taken, has 999-count range. Product can also be pre-set to count any specific number in-between, as in counting down from 200 or 120 to 0, allowing users to keep track of medication and alerting them when inhaler is nearing its useful end. Able to be retrofitted to all types of standard mouthpieces with minor modifications, product features 7-part construction. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Eddy Current-Based Sensor System is fail-safe up to 285°C.

April 4, 2014

Optimized for thin turbine blades made from aluminum or titanium, turboSPEED DZ140 measures rotational speed of turbochargers in bench and field tests. This eddy current-based revolution counter is thermally stable and suitable for speed measurements from 200–400,000 rpm. Exhibiting immunity to interference in harsh test conditions, 3 mm dia sensor integrates temperature measurement feature that records, among other data, actual ambient temperature near to sensor. Read More

Test & Measuring Instruments, Material Handling & Storage

Portable Lineal Cutting System offers jobsite table accessory.

April 4, 2014

Designed to attach to either side of miter or chop saw, SawGear provides automatic length measuring on jobsite. Tables come in 8, 12, and 16 ft working lengths with hinge system and tripod supports. Users can also add on in-feed tables made to customized lengths. In addition, SawGear comes equipped with Crown+MiterPro, which instantly calculates difficult crown angles and lengths. Able to store up to 100 cut dimensions, SawGear delivers cutting accuracy to within 1/128 in. Read More

Test & Measuring Instruments

Remote Particle Counters resist damage from VHP.

March 27, 2014

Designed with Vaporized Hydrogen Peroxide-resistant coatings and materials, AeroTrak® 7510-VHP Series is suited for GMP manufacturing applications where accidental VHP exposure can occur. Units integrate with FMS validated monitoring software and can store up to 3,000 sample records for data redundancy. Powered via PoE or local power supply, counters offer variety of connectivity options, including TCP/IP, serial Modbus RTU communications, or 4-20 mA analog outputs. Read More

Test & Measuring Instruments

Particle and Cell Counter features 10 micron aperture.

March 5, 2014

With 10 micron aperture, Multisizer 4e obtains accurate count, size, and mass distribution for particles and cells ranging from 0.2–1,600 microns. Digital Pulse Processing provides high-resolution analysis in up to 400 channels and dynamic size measurements in real-time. High-speed signal digitalization allows use of various pulse parameters for more accurate cell and particle characterization. Using smart technology, sample management system provides consistency from one analysis to next. Read More

Test & Measuring Instruments

Instrument Suite provides nuclear pulse counting.

February 24, 2014

Providing nuclear pulse counting and pulse-height analysis for research applications, EASY-NIM 928 combines nuclear multi-channel analyzer with up to 4 counter-rate meters and 2 timers. Modules that comprise suite include 928 MCB/quad counter/dual timer module, 928-MCB Multi-Channel Buffer, 928 COUNT-2 with 2 counters and 1 timer, and 928 COUNT-4 with 4 counters and 2 timers. Each variant is packaged in single-width Nuclear Instrumentation Module hardware format and is computer controllable. Read More

Test & Measuring Instruments, Plant Furnishings & Accessories, Machinery & Machining Tools

People Counting System enhances building intelligence.

November 29, 2013

Accurate in all lighting conditions, Irisys IRC 3020 People Counter automates counting of people entering or exiting building by detecting their body heat. Real-time occupancy is delivered on BACnet to any BAS, enabling system to trigger HVAC controls. Facilitating operations planning and energy conservation, integrated Smart Building solution can be used to understand occupancy, conversions, and traffic as well as plan product placements and staff deployment. Read More

Test & Measuring Instruments, Display & Presentation Equipment

LCD Hour Meter/Counter suits maintenance applications.

November 12, 2013

Used for time measurement and event counting in scheduled maintenance applications, T39 Series features 2 displays that can operate independently or in parallel. Tamper-proof LCD, 6-digit hour meter and up or down counter is epoxy encapsulated to IP67 and protected from environment to provide uninterrupted service. Accumulated time hours and counts are stored on powerless, nonvolatile data backup using CMOS EEPROM technology. Accuracy is better than ±0.01% over entire range. Read More