Servomex Group Ltd
Crowborough East Su TN6 3DU  United Kingdom
Nov 10, 2008 In addition to fault and calibration histories, SERVOTOUGH Oxy offers NAMUR-compliant relay functions, allowing 2 concentration alarm levels, as well as maintenance required, service in progress, and instrument fault messages to be communicated remotely. Fully heated sample compartment removes requirement for sampling conditioning system on all samples with dew point up to 50°C. Located after measurement outlet, flow sensor guarantees accurate flow alarm settings.

MOCON
Minneapolis, MN 55428 1010
Nov 06, 2008 Offering out-of-the-box installation and Quick Start® functionality, OX-TRAN® Model 1/50 oxygen transmission rate (OTR) analyzer provides automatic controls for all testing conditions. Absolute coulometric method eliminates need for calibration, and built-in software minimizes user error. Using standard 50 cm² cell, analyzer tests medium to low barrier film within 0.1-200 cc/m2 day range and less than 65 mil thick. It can also test coated paperboard.

Photovac Inc.
Waltham, MA 02451 1166
Oct 28, 2008 Voyager Portable Gas Chromatograph offers on-site capability for measuring critical sulfur species to establish sulfur and VOC content in natural gas, thereby allowing production companies to determine corrective measures for scrubbing and removal of contamination. Datalogging capability enables readings to be stored in instrument and downloaded to computer for analysis and recordkeeping. Voyager is intrinsically safe for operations in hazardous environments.

Industrial Test Systems, Inc.
Rock Hill, SC 29730
Oct 02, 2008 Compliant with USEPA, EZ Coliform Cult - MUG Test consists of sterilized, ready-to-use 120 mL bottle containing premeasured amount of growth media. To run test, user adds water sample, caps bottle, and then incubates at 35°C for 24 hr. If coliforms are present, liquid sample will change from yellow to blue-green in color. If E. coli is present, sample will glow bright blue fluorescent color when illuminated with UV light.

Oxford Instruments Analytical
High Wycombe HP12 3SE  United Kingdom
Oct 02, 2008 Combining silicon drift detector with 45 kV X-ray tube and traceable Empirical Calibration, Model X-MET5100 enables light elements such as Mg, Al, and Si to be measured. X-MET5100 assures laboratory quality analysis of aluminum and titanium alloys, as well as copper, nickel, and steel. Restricted elements, lead in toys, contaminants in soil, and small concentrations in ores can be measured down to ppm level. Device is IP54 approved for dust and water splash protection.

Millipore Corp.
Bedford, MA 01730
Sep 30, 2008 Designed to help researchers understand mechanism of cellular aging, OxyELISA(TM) Oxidized Protein Quantitation kit provides all reagents necessary for quantitative, high-throughput detection of modified proteins in cells undergoing oxidative stress. Solution detects carbonyl groups introduced into cells by oxygen free radicals and other reactive species. It uses direct labeled monoclonal antibody that is readily detected without secondary antibody.

Sartorius AG
  Germany
Sep 16, 2008 Designed for online analysis, PMD300 can automate moisture content data taken at multiple readings per second via microwave resonance technology to provide users with complete overview of current production process state. Immediate feedback can be realized via manual process control as well, and both means can send results to PC, switch cabinet, or PLC. Core and surface moisture content are analyzed, and measurable moisture content ranges from 0.1-60% depending on sensor type.

EDAX, Inc.
Mahwah, NJ 07430
Sep 02, 2008 Available with mono-capillary optics or as a PC with high-intensity poly-capillary optic, Orbis micro-XRF elemental analyzer incorporates motorized turret that integrates video and x-ray optics for coaxial sample view and x-ray analysis over rough sample topography without sacrificing signal intensity. Users can make elemental analyses on small samples such as particles, fragments, and inclusions, or conduct automated multi-point and elemental imaging analysis on larger samples.

Teseq, Inc.
Edison, NJ 08837
Aug 26, 2008 Model AES 5500 tests conducted electrical transient compatibility of equipment installed in passenger cars and light commercial vehicles fitted with 12 V electrical system or commercial vehicles fitted with 24 V electrical system. Its 100 A MC-type connectors are strategically placed and countersunk 50 mm above ground plane to allow for precise cabling. Separate control station is supplied for automatic, manual, or external triggering of switches.

Picarro Inc.
Sunnyvale, CA 94085
Aug 26, 2008 Fully automated for running large sample batches, Picarro L1102-i simultaneously measures delta-18 O and delta-D directly from water samples with respective sensitivities of less than 0.1 and 0.5 parts per thousand. Instrument requires little or no sample preparation, provides data in minutes, and utilizes wavelength-scanned cavity ring down spectroscopy engine. Robotic autosampler and vaporization accessory enables many samples to be analyzed in one automated, hands-free sequence.

Analytical Technology, Inc.
Oaks, PA 19426
Aug 22, 2008 Utilizing membrane-covered polarographic sensor that does not require addition of chemical reagents, Model Q45H/62 Residual Chlorine Monitor allows on-line control of chlorination systems without use of reagents or mains power and enables direct installation into water and wastewater networks. Available with 2 data logging options, it comes in shock-proof, water-resistant casing. Unit has optional pH compensation feature to eliminate free chlorine error caused by process pH drift.

Emerson Process Management
Austin, TX 78754
Aug 21, 2008 Designed for large industrial boilers and furnaces, Rosemount Analytical X-STREAM® Oxygen Analyzer features AccuMax(TM) accuracy specifications, extended temperature capability, and probe lengths of up to 18 ft. In situ combustion flue gas analyzer provides information to control fuel-to-air ratio of burner as well as indication of stratification of flue gases inside the furnace. It can be adjusted after installation and repaired without removing probe from furnace duct.

Midtronics, Inc.
Willowbrook, IL 60521
Aug 14, 2008 Battery conductance and electrical system analyzers of MDX-600 Series utilize industry standard conductance technology and offer user interface that promotes accurate analysis. All feature backlit screen and removable cable design and are offered with integrated printer option. Models 650/650P offer quick starter analysis, without disabling ignition, and menu-driven interface for complete charging system analysis.

PerkinElmer, Inc., Life Sciences Headquarters
Boston, MA 02118
Aug 13, 2008 Based on PerkinElmer® Clarus® Gas Chromatograph, Models 1117 and 1317 incorporate column sets to accommodate use of hydrogen carrier gas to optimize throughput. Using 2 thermal conductivity detectors and flame ionization detector, Model 1117 provides analysis of helium, hydrogen, oxygen, nitrogen, CO2, CO, H2S, and C1 through C5 hydrocarbons in approximately 7.5 min. Model 1317 offers additional capability of sampling pressurized liquids through use of liquid sampling valve.

Thermo Fisher Scientific
Waltham, MA 02454
Aug 12, 2008 Model ARL 4460 OES metal analyzer features OXSAS software that provides one-click routine analysis launch as well as access to recent analyses for on-screen comparison and full traceability. It also features on-line Spark-DAT option which integrates into OXSAS, enabling cleanness statements and inclusion determinations to be performed quickly during metals production. Unit can be coupled to ARL SMS-2000 automation system for fully automated sample preparation, sample handling, and analysis.

Electro-Chemical Devices, Inc.
Yorba Linda, CA 92887
Aug 01, 2008 FCA-22 Analyzer System monitors free chlorine in drinking water, rinse water, cooling water, and other fresh water samples from 0.05-20.0 ppm Cl2, 5-9 pH, and at temperatures from 32- 122°F. Constant head flow control device maintains optimum water flow past sensor over 10-80 gph incoming flows. Incorporated pH sensor provides compensation for samples from 6.5-9 pH, and Cl2 sensor's polarographic, gold/silver PFTE membrane construction extends sensor life.

Teseq, Inc.
Edison, NJ 08837
Aug 01, 2008 Featuring substitution and closed loop test methods, NSG 4070 meets automotive industry standards for bulk current injection test methods, including ISO 11452-4. With modular set-up that utilizes internal/external amplifiers, it is also useful in non-automotive test labs and design departments for RF conducted immunity testing according to IEC 61000-4-6. Front panel of system includes 5.7 in. TFT color display, push buttons, USB port, and external access to signal generator output.

Tiger Optics, L.L.C.
Warrington, PA 18976-2426
Jul 30, 2008 Employing Continuous Wave Cavity Ring-Down Spectroscopy (CW-CRDS) technology, Tiger-i(TM) monitors cleanroom ambient air for gas phase airborne molecular contaminants that compromise manufacturing process quality and yield. It offers immediate, calibration-free analysis, measuring parts per trillion levels of trace hydrofluoride (HF) and hydrochloride (HCl) gases. Built-in reference cell and automated tune function provide 99.9% uptime without calibration, consumables, or maintenance.

GOW-MAC Instrument Co.
Bethlehem, PA 18017 8986
Jul 16, 2008 Engineered for quantifying trace amounts of toxic gases in industrial gas applications, Series 900 can determine any gas species with potential to be derivatized as well as quantify ppb/ppm level impurities in industrial processing and electronic gases, such as N₂, N₂O, NF₃, and CxHy. It features continuous, digital readout, colorimetric detector, internal sample pump, and adjustable flow rate and light intensity. Unit is self-contained in 19 in. rack mount design.

Emerson Process Management / Process Analytic Division
Solon, OH 44139
Jul 02, 2008 Able to perform 4 measurements in single enclosure, X-STREAM® Gas Analyzers feature IntrinzX(TM) technology, which uses split cell dual beam photometry and constant comparison of reference signal and measurement signal to achieve intrinsically linear response to changes in concentration. Technology enables sensitivity as low as 0-10 ppm, span drift less than 0.5% per week, and dynamic ranges as large as 0-200 to 50,000 ppm. NEMA 4X/IP66 and flameproof versions are available.