SEAWARD ELECTRONIC LTD
County Durham SR8 2SW  United Kingdom
Jul 31, 2007 Battery-powered, hand-held Primetest 100 combines functionality of tool and appliance tester with extension cord tester and power receptacle checker in single instrument. By verifying electrical safety of electrical products, equipment, and appliances, unit helps employers meet OSHA obligations. OSHA 1910.334(a) indicates any damaged portable cord or plug connected equipment may not be used by employee until repairs and tests necessary to render equipment safe have been made.

Associated Research, Inc.
Lake Forest, IL 60045
Feb 21, 2007 Operating as stand-alone unit or as part of test system, Model 620L offers Hipot, ground bond, power source, and scanner interconnection capabilities. When configured with optional Run Test features, unit can also monitor min and max readings for voltage, current, Watts, power factor, and leakage current. It includes graphic LCD and intuitive menu system, 50 memories with 30 steps/memory, up to 40 A max continuous DUT current, and RS-232, GPIB, or Ethernet interfaces.

Ideal Industries, Inc.
Sycamore, IL 60178
Jan 30, 2007 By plugging into circuit at point of equipment connection, Voltage Performance Monitor identifies voltage events and harmonics that cause equipment damage and failures. It tells technician if problematic voltage events are occurring and logs time, duration, and severity of event. Up to 512 events can be stored in memory for review by category or chronological order. Instrument also lets technician verify need for UPS installation or surge protector.

CLARE INSTRUMENTS US INC
Tampa, FL 33634
Jan 18, 2007 Rigel 288 enables EBME departments and medical equipment service engineers to meet in-service and post-repair test demands of IEC 60601 standard. Along with Bluetooth technology for wireless accessory connection, portable handheld features menu-driven instructions that facilitate operation of all preset or custom-developed electrical safety tests in manual, semi-automatic, or fully automatic modes. Internal memory stores test results for audit and traceability purposes.

Associated Research, Inc.
Lake Forest, IL 60045
Dec 19, 2006 Available in 4-in-1, 5-in-1, and 6-in-1 models, OMNIA® Electrical Safety Compliance Analyzers utilize Ethernet communication card for setting up tests, executing tests, and retrieving data remotely from PC with network connection. Card also provides active RS-232 serial port as well as barcode scanner port, which allows barcode scanner to be used directly on instrument without PC. Other interface options include GPIB, RS-232, and internal data storage card.

CLARE INSTRUMENTS US INC
Tampa, FL 33634
Nov 01, 2006 Incorporating 7 fundamental tests, SafeTest multi-purpose safety tester is designed for low to medium volume electrical production environments. Including full QWERTY keypad and on-screen user instructions, compact bench top device performs earth/ground bond, insulation resistance, flash/hipot, leakage, short-to-line, and run/load tests. Automatic/manual tester can store results of 6,000 tests, and includes special safety interlocks and protection routines.

QuadTech, Inc.
Maynard, MA 01754
Oct 30, 2006 Suited for dielectric testing of cables, power supplies, and other multiple connection products, Hybrid 2000 performs high-voltage ac (50-5,000 V), dc (50-6,000 V), and IR tests (100 kW to 50 GW) as well as DCR measurements (50 mW to 100 kW). All functions, including 8-channel high-voltage scanner, can be programmed via front panel or remotely via RS-232. Unit offers multiple safety features and store/recall capabilities for up to 50 test setups with 20 steps each.

Associated Research, Inc.
Lake Forest, IL 60045
Jun 19, 2006 OMNIA® and HypotULTRA® III series electrical safety testers are available with optional Data/Interface card, which provides choice in communication protocols as well as method to log test data. Data/Interface card features serial port configurable for RS-232 or RS-485 communication, and PS/2 input allows for bar code scanning directly from tester. Data collection port works directly with provided 256 MB flash memory stick.

CLARE INSTRUMENTS US INC
Tampa, FL 33634
May 22, 2006 Battery-powered for portability, handheld PrimeTest 50 provides immediate push-button pass/fail indication. User connects power cord or tool to tester, selects test, and within 5 seconds receives indication as to whether cord or equipment is safe for use. If operator selects incorrect test, unit will issue audible warning until correct button is depressed. Adaptors are provided for cords covering 115 and 124 V as well as 15 and 20 A NEMA connectors.

Associated Research, Inc.
Lake Forest, IL 60045
Apr 20, 2006 Designed to work with line leakage and functional run testing capabilities of OMNIA series of electrical safety compliance analyzers, AC1000 power source is used in applications requiring isolation transformer adjustable to 110% of line voltages. It features 1 kVA, programmable software current limits, programmable over-current fold back to maintain constant output current with varying load, 3-way power on condition, and 3 programmable memory locations.

CLARE INSTRUMENTS US INC
Tampa, FL 33634
Apr 19, 2006 SafeCheck 8 electrical safety tester allows operators to program tests for ground bond, insulation, flash, short test, leakage, and run tests, or select from pre-programmed tests for Class I/II electrical equipment, extension cords, and locking power cord tools. Equipment/tools are automatically sequenced through test routine, where results are recorded. Capable of holding 5,000 test results, unit can also be used with barcode reader to scan ID number or pre-programmed test routines.

Greenlee Textron, Inc.
Rockford, IL 61109
Aug 10, 2005 Electrical Kit TK-30 is comprised of DM-20 manual ranging multimeter, GT-11 voltage detector, and GT-10 polarity cube. Model DM-20 measures current of small electronic circuits, ac/dc voltage, dc amperage, resistance, and also checks 9 V batteries. Offering non-contact voltage detection, Model GT-11 provides LED and audible alarm if voltage is present. Model GT-10 troubleshoots 120 Vac grounded outlets and has light sequence that indicates correct or incorrect wiring.

QuadTech, Inc.
Maynard, MA 01754
Jul 20, 2005 Featuring Twin-Port™ technology, Guardian 6000 Plus Series performs 5 major electrical safety tests, including AC Hipot, DC Hipot, Insulation Resistance, Ground Bond, and Open/Short. Guardian 6100 Plus also performs Leakage Current and Functional Run Tests. Results are indicated on front panel LCD display during test and overall go/no-go indication is provided. CaptivATE software creates global database to archive data and print test reports on demand.

Associated Research, Inc.
Lake Forest, IL 60045
Apr 15, 2005 HypotMAX™ series multifunction electrical safety compliance analyzers perform various product safety tests from one instrument. Model 7700 is 3-in-1 tester with 5 kV ac Hipot @ 100 mA, 6 kV dc Hipot @ 10 mA, and Insulation Resistance testing, and Model 7704 is 4-in-1 tester that adds 30 A Ground Bond testing. Both models, which include auto discharge and remote safety interlock, are fully automated and come with RS-232 or GPIB interfaces.

Slaughter Company
Lake Forest, IL 60045
Aug 03, 2004 Model 4320 performs AC hipot, DC hipot, insulation resistance, and ground bond tests through one DUT connection. In AC hipot mode, unit outputs up to 5 kV at 20 mA and in DC hipot mode it will output up to 6 kV at 5 mA. Insulation resistance test mode offers test range up to 1,000 Megohms, while ground bond test mode provides up to 30 A of test current. Model 4320 includes electronic ramp and dwell, milliohm offset, and 6 memories that provide 6 steps per memory.

Associated Research, Inc.
Lake Forest, IL 60045
Jun 02, 2004 Offered as 4-in-1, 5-in-1, and 6-in-1 models, OMNIA 8100 Series features 50 memories with 30 steps per memory, built-in real current measurement, and RS-232 or GPIB automation interfaces. Base model 8104 contains 4 electrical safety tests: AC Hipot, DC Hipot, Ground Bond/Continuity, and Insulation Resistance. Model 8105 adds Functional Run testing, and model 8106 adds Line Leakage testing. Series features extended Ground Bond test current up to 40 A.

Associated Research, Inc.
Lake Forest, IL 60045
Apr 30, 2004 Used with automated electrical safety testers, modular Model SC6540 automatically makes connections by switching testing outputs of safety tester to correct test point of device under test. Unit allows manufacturers to connect multiple products at one time and cycle through tests. Master configuration can control up to 4 slave scanning matrixes, which provides total of 80 testing ports from single power source. Slave is configured without power module.