Coherent Inc., Laser Group
Santa Clara, CA 95054-1112
Nov 18, 2009 PowerMax(TM) USB/RS sensors include signal processing and power measurement electronics inside USB 2.0 or RS-232 cable connector. Units connect directly to PC and include PowerMax PC applications software with virtual instrument interface, which enables operator to take laser power readings, log data, and compute measurement statistics. Suited for various applications, sensors provide accurate laser power measurement from deep UV to IR over µW to kW power range.

Ophir-Spiricon Inc.
Logan, UT 84321
Sep 10, 2009 Designed for low and medium power pulsed industrial Nd:YAG and diode lasers, Beam Cube measures beam profile, temporal pulse shape, and focal spot sizes as small as 5 µm. Compact, portable unit incorporates focal spot analyzer, power meter, and fast photodiode detector, and can be used for pulsed or CW and vertical or horizontal beams. Profiles can be viewed in 2D or 3D, while temporal pulse shape can be displayed alone or together with beam profile on PC, or output to oscilloscope.

Ophir-Spiricon Inc.
Logan, UT 84321
Feb 04, 2009 BeamGage(TM) profiling software, based on UltraCal(TM) baseline correction algorithm, ensures data baseline (zero-point reference) is accurate to 1/8 of digital count on pixel-by-pixel basis. Also included, BeamMaker(TM) beam simulator numerically models expected results to confirm accuracy of beam measurement before experiments. Auto Aperture camera control accelerates application setup, while range of calculations and support for custom algorithms provide best fit for each application.

Ophir-Spiricon Inc.
Logan, UT 84321
Nov 12, 2008 Designed for material processing applications such as drilling, ablating, and marking, YAG Focal Spot Analyzer attenuates 1,064 nm YAG power lasers with short, compact path lengths of 50-200 mm, and supports powers levels from less than 1 to 400 W. With adjustable attenuation up to 1 x 10-10, system measures focal spot characteristics, as well as how focal distance shifts with power. Modular C-mount unit can be added to any CCD camera.

Ophir-Spiricon Inc.
Logan, UT 84321
May 15, 2008 Model BA150 Industrial Laser BeamAnalyzer system incorporates USB 2.0 silicon CCD camera with beam analysis software to monitor all key laser beam parameters for 1,064 nm pulsed and CW industrial Nd:YAG, diode, and fiber lasers up to 150 W. Parameters including beam profile, average laser power, energy per pulse, pulse rate, and temporal pulse width. All measurements are made independently of laser power supply and can be output to PC.

Ophir-Spiricon Inc.
Logan, UT 84321
May 01, 2008 Enabling quantitative measurement and viewing of CO₂ beams, II-VI-CO2-58 Industrial Laser Beam Analyzer diagnoses faults and corrects issues related to beam stability, alignment, tuning, and optimization. With ability to handle up to 10 kW of power, portable device features 58 mm clear aperture that enables users to measure large laser beams. Laser beam profiling system is designed to work with Pyrocam(TM) III beam profiling camera that delivers 1,000:1 linear dynamic range.

Ophir-Spiricon Inc.
Logan, UT 84321
Jul 27, 2007 Model M2-200S Beam Propagation Analyzer features UV operation between 250-370 nm, visible operation from 400-700 nm, and NIR operations from 650-1,100 nm (1,064 nm YAG) and 1,000-1,800 nm (1,064 nm YAG plus telecom). All measurements and translations as well as incremental beam attenuation are automatically controlled by M2-200S software. ISO compliant unit comes in M2x, M2y, Ky, Ky, BPPy, BPPy, width at waist Wy, Wy, and waist location at Zy, Zy.

New Wave Research
Fremont, CA 94539
Mar 06, 2007 As flexible analytical tool for range of materials, UP193-FX 193 nm short-pulse excimer laser ablation system is suited for bulk or micro-feature analysis and includes 13 pre-calibrated spot sizes with constant fluence. Use results in consistently smaller aerosol particles from all materials for optimal ionization and crater quality as well as minimal fractionation. System offers fully homogenized beam, wavelength coupling to ICP-MS, and up to 4 GW/cm² irradiance at sample.

Ophir Optronics, Inc.
Danvers, MA 01923
Oct 12, 2004 Featuring conical probe design for maximum high damage threshold, Comet 10K-HD measures outputs from CO₂, YAG, and diode industrial laser sources. It provides absolute calibration accuracy of ±5% and repeatability of ±1% for same initial temperature. Linearity with power is ±2% from 1–10 kW. Equipped with swivel mount that rotates ±90°, Comet 10K-HD can measure laser using automatic or manual measurement mode.

Coherent Inc., Laser Group
Santa Clara, CA 95054-1112
Mar 05, 2003 Multi-kilowatt, water-cooled Models PM1K-100, PM3K-100, and PM5K-100, with 100 mm diameter surface area, and Model PM5K-200, with 200 mm diameter surface area, measure energy output of diode laser bars, large cross-section laser beams, diode laser arrays, and high-divergence laser beams. Probes measure output of lasers ranging from 0.19–11 µm with 1 W power resolution. Devices feature maximum average power density of 26 kW/cm² and maximum pulse energy density of 0.6 J/cm².