Data & Symbol Analyzers

Test & Measuring Instruments, Sensors, Monitors & Transducers, Computer Hardware & Peripherals

Remote Monitors warn of excessive dust, noise, and vibration.

July 22, 2015

Designed for continuous monitoring of emissions in construction, demolition, and mining sites, web-based Noise Guardian™ and Boundary Guardian™ deliver real-time email or text to users when noise, dust, or vibration levels rise above acceptable levels. Casella Dataview™ 24/7 software enables reports to be accessed in on-screen view from virtually any PC, tablet, or smartphone with secure login. Protected in weatherproof housing, systems withstand extreme conditions.  Read More

Test & Measuring Instruments, Optics & Photonics

Phase Noise Analyzer/VCO Tester supports functional upgrades.

May 22, 2015

Covering frequency range up to 50 GHz, R&S FSWP phase noise tester can measure spectral purity of such signal sources as generators, synthesizers, and VCOs. Phase noise of local oscillator, coupled with cross-correlation, facilitates signal source measurement. In addition to being able to measure phase noise of pulsed sources as well as residual phase noise under pulsed conditions, unit can also be upgraded to signal and spectrum analyzer. Read More

Test & Measuring Instruments

Modeling/Analysis Software aids Ethernet, multicore design.

May 5, 2015

Improving timing design and verification for automotive Ethernet and multicore systems, SymTA/S 3.7 lets users model and analyze dynamic data chains with data dependent execution of ECU tasks and frame transmission on Ethernet and CAN. TraceAnalyzer 3.7 is fully integrated, and other features include modeling and analysis of data chains, dependent dynamic Ethernet frame packing, accelerated system distribution analysis, Gantt-Filter, APIs, and AUTOSAR 4.x multicore import. Read More

Test & Measuring Instruments

Boundary Scan Analyzer supports Intel Skylake microarchitecture.

April 28, 2015

Designed to maximize structural test coverage for board designs that incorporate Intel processors, Keysight x1149 offers capabilities to test Intel® Skylake microarchitecture. This test application will specifically help electronics designers and manufacturers test boards with said microprocessor architecture using boundary scan and Intel Silicon View Technology (Intel SVT). Functionality solves test challenges of limited access to complex PCBAs with high-speed devices. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals

Upstream Diagnostic Analyzer meets cable operators' needs.

March 9, 2015

By helping cable multi-system operators (MSOs) remotely detect and locate upstream noise sources in real-time, upstream diagnostic analyzer enables proactive diagnosis and resolution of subscriber network connectivity issues without service calls or truck rolls. Solution can locate ingress/burst noise to single customer premises equipment (CPE) and utilize multiple CPEs to isolate exact location of noise source. Information and spectrum analysis is available via existing SNMP or Web UI. Read More

Test & Measuring Instruments

Sound Level Meters offer enhanced usability via software.

February 25, 2015

Model 831 and LxT support SLM Utility G4 software, which provides usability-optimized interface for sound level meter setup and data analysis. Software promotes work efficiency by supporting simultaneous control of multiple meters and allows consultants/engineers to share setups, download and display data, as well as export to Excel® files via USB or Internet connection. Standard version is 64-bit to support large data files, and another version is available for 32-bit computers. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals

IP Traffic Analyzer provides detailed, high-volume monitoring.

February 23, 2015

Simultaneously supporting up to 5,000 calls with duplex traffic at 1 Gbps rate (per appliance), 1U PacketScan™ HD (High Density) can capture, decode, filter, and analyze VoIP and Wireless protocols carried over SCTP transport layer (Link). Packet Data Analysis module provides in-depth, real-time and post-process data investigation, and QoS parameters include E-model (G.107)-based MOS/R-Factor scores, Packet Loss, Delay, and Jitter for voice calls. Media Delivery Index is available for video. Read More

Test & Measuring Instruments, Software

Data Storage Analyzers provide NVMe support.

November 19, 2014

Available for PCIe 3.0 technology, BusXpert Pro supports data rates up to 8 lanes at 8.0 GT/s and offers optional 144 GB of trace buffer, while smaller form factor Micro supports 4 lanes at 8.0 GT/s. Native Non-Volatile Memory Express support permits NVMe commands contained in PCIe packets to be presented and decoded. With software options, user can hide non-NVMe data to focus on traffic of interest. Additionally, BusXpert's 7-level trigger sequencer has been optimized to support NVMe events. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals

Portable Analyzer troubleshoots PCI Express issues. .

November 3, 2014

Suited for field environments, BusXpert Micro for PCIe 3.0 enables users to identify and resolve interoperability and component issues with PCIe systems. Unit supports data rates of 2.5, 5.0, and 8.0 GT/s and provides capture, analysis, and insight of PCI Express traffic at all layers. Measuring 7 x 10 x 2 in., analyzer offers advanced triggering with up to 7 separate simultaneous sequencers, and includes built-in eye diagram display that allows digital signals to be observed in graphic form. Read More

Test & Measuring Instruments, Software

DDR 3/DDR 4 Compliance Analyzer provides immediate feedback.

October 21, 2014

Kibra 480 Compliance Analyzer enables DDR memory developers, implementers, and integrators to verify and validate that DDR memory design meets JEDEC compliance parameters. Supporting DDR3 or DDR4, analyzer can be set up within minutes, and probing technique eliminates need for calibration. Offering immediate feedback on violations, unit is capable of simultaneously monitoring compliance of over 3,200 potential violations across up to 64 banks of memory.
Read More

Test & Measuring Instruments, Electronic Components & Devices

Audio Analyzer boasts low noise and distortion.

October 17, 2014

Designed for developers of audio components, equipment, and systems, Series APx555 provides 2 analog channels with typical residual THD+N of -120 dB, allowing sensitive measurements to be made with assurance. Unit features up to 1 MHz bandwidth and FFT resolution of 1.2 million points across all channels. Generator is capable of producing low distortion sine wave signals up to 204 kHz, at high-level amplitudes up to 26 Vrms. Read More

Test & Measuring Instruments

Performance Audio Analyzer offers wide bandwidth options.

September 24, 2014

Suited for testing 3G, 4G/LTE, and VoIP phone and network equipment as well as HD voice test, U8903B offers configurable options for speech and voice quality measurements, extendable bandwidth, and digital audio interfaces. Solution also offers ITU-T standard perceptual objective listening quality assessment and perceptual evaluation of speech quality; option of choosing 2, 4, or 8 channels; distortion measurement with THD+N of <-110 dB; and automated test sequence control function. Read More

Test & Measuring Instruments, Electronic Components & Devices

Audio Analyzer provides AES3 and S/PDIF digital I/O.

September 15, 2014

With typical residual THD+N of -120 dB, two analog channels of Model APx555 feature low noise and distortion, allowing sensitive measurements to be made. Unit provides 1 MHz bandwidth (mono) and FFT resolution of 1.2 million points. Generator is capable of producing low distortion sine wave signals up to 204 kHz, at high-level amplitudes up to 26 Vrms. Providing multi-mode user interface, APx500 v4.0 software allows switching between Sequence Mode and Bench Mode. Read More

Test & Measuring Instruments

Handheld Analayzer provides QC tool for folding carton industry.

June 19, 2014

Used for real-time production and setup correction, BetaFold Crease & Fold Analyzer minimizes uncontrolled variations in process that cause unusable product rejects. Portable product, through software and hardware, captures and analyzes images of crease and automatically displays, analyzes, and records data for real-time production corrections, documentation, and report generation. Operator needs to only click once for each critical analysis. Read More

Test & Measuring Instruments

Differential Hematology Analyzer combines capacity, flexibility.

April 10, 2014

Able to store 10,000 records, Abacus 3CT bench-top, 3-part differential analyzer offers 22 parameters for patient data acquisition. Cap piercing enables use with sample tubes that are open or closed, and 8 in. Hi-Res color touchscreen with multilingual UI facilitates operation. Along with 24-lot QC capacity, QC features include ability to load QC values via QR codes or USB. User-based operating rights, LIS connectivity, and aperture anti-clog protection and automatic cleaning are standard. Read More

Test & Measuring Instruments

Noise Analyzer measures flicker noise and RTN.

March 21, 2014

Featuring modular design that minimizes system noise, E4727A Advanced Low-Frequency Noise Analyzer supports wafer mapping measurement and data analysis of flicker noise and random telegraph noise. Typical applications include development, qualification, and monitoring of semiconductor materials and IC manufacturing processes. Analyzer is also suitable for design and verification of many circuits used as fundamental building blocks in RF, analog, and high-speed digital applications. Read More

Test & Measuring Instruments

Sound Level Meter supports 2 channel option.

December 19, 2013

Helping reduce time spent conducting multi-point acoustic measurements, Type 2270 supports 2 channel option that allows both channels to receive simultaneous input from 2 microphones or accelerometers. It is also possible to receive feedback from one microphone and one accelerometer, and 2 channel option is compatible with Signal Recording Option BZ-7226. User can play back recordings and export data for further analysis via Measurement Partner Suite. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals

Passive Intermodulation Analyzer addresses PCS/AWS field testing.

December 9, 2013

With available frequency option, PIM Master MW82119A handheld analyzer provides field solution for measuring and improving PIM performance in both PCS- and AWS-band networks. Distance-to-PIM (DTP) technology lets operators find and eliminate PIM sources located inside feed system or beyond antenna. PIM Master MW82119A-0193 can transmit 2 test tones in PCS downlink band or transmit one test tone in PCS downlink band and second in AWS downlink band. Trace overlay feature is also included. Read More

Test & Measuring Instruments

Interface Analyzer displays all EIA/TIA RS-530 signals.

December 5, 2013

Designed for use at EIA/TIA RS-530 data interface of modems, multiplexers, and terminals, Model 900 is inserted in series between DTE and DCE to provide access to and monitoring of all data, timing, and control signals. Miniature slide switches let user program make or break for each signal, while mini-patchcords enable cross-patching or loopback patching of signals. Powered by two 9 V batteries, Model 900 uses red and green LEDs to display polarity, activity, and validity of signals. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals

T1 E1 Analyzer System offers multiple platform applications.

November 19, 2013

T1 E1 Analyzer Software and Hardware v7.10.24 includes several platform applications: T1 E1 Analyzer software, Datacom Analyzer, Windows Client Server, Protocol Analyzers, and MAPS™ INAP Emulator. Latter can emulate IN services available in TDM based SS7 network. Main GUI’s monitor and settings window includes such functionalities as Transmit Under Run and Receive Over Run status. Graph displays all alarms and error types, and real-time graph data is automatically saved. Read More