Emerson Process Management
Austin, TX 78754
Aug 21, 2008 Designed for large industrial boilers and furnaces, Rosemount Analytical X-STREAM® Oxygen Analyzer features AccuMax(TM) accuracy specifications, extended temperature capability, and probe lengths of up to 18 ft. In situ combustion flue gas analyzer provides information to control fuel-to-air ratio of burner as well as indication of stratification of flue gases inside the furnace. It can be adjusted after installation and repaired without removing probe from furnace duct.

PerkinElmer, Inc., Life Sciences Headquarters
Boston, MA 02118
Aug 13, 2008 Based on PerkinElmer® Clarus® Gas Chromatograph, Models 1117 and 1317 incorporate column sets to accommodate use of hydrogen carrier gas to optimize throughput. Using 2 thermal conductivity detectors and flame ionization detector, Model 1117 provides analysis of helium, hydrogen, oxygen, nitrogen, CO2, CO, H2S, and C1 through C5 hydrocarbons in approximately 7.5 min. Model 1317 offers additional capability of sampling pressurized liquids through use of liquid sampling valve.

Tiger Optics, L.L.C.
Warrington, PA 18976-2426
Jul 30, 2008 Employing Continuous Wave Cavity Ring-Down Spectroscopy (CW-CRDS) technology, Tiger-i(TM) monitors cleanroom ambient air for gas phase airborne molecular contaminants that compromise manufacturing process quality and yield. It offers immediate, calibration-free analysis, measuring parts per trillion levels of trace hydrofluoride (HF) and hydrochloride (HCl) gases. Built-in reference cell and automated tune function provide 99.9% uptime without calibration, consumables, or maintenance.

GOW-MAC Instrument Co.
Bethlehem, PA 18017 8986
Jul 16, 2008 Engineered for quantifying trace amounts of toxic gases in industrial gas applications, Series 900 can determine any gas species with potential to be derivatized as well as quantify ppb/ppm level impurities in industrial processing and electronic gases, such as N₂, N₂O, NF₃, and CxHy. It features continuous, digital readout, colorimetric detector, internal sample pump, and adjustable flow rate and light intensity. Unit is self-contained in 19 in. rack mount design.

Emerson Process Management / Process Analytic Division
Solon, OH 44139
Jul 02, 2008 Able to perform 4 measurements in single enclosure, X-STREAM® Gas Analyzers feature IntrinzX(TM) technology, which uses split cell dual beam photometry and constant comparison of reference signal and measurement signal to achieve intrinsically linear response to changes in concentration. Technology enables sensitivity as low as 0-10 ppm, span drift less than 0.5% per week, and dynamic ranges as large as 0-200 to 50,000 ppm. NEMA 4X/IP66 and flameproof versions are available.

Thermo Fisher Scientific
Newington, NH 03802
Jun 16, 2008 Thermo Scientific FLASH 4000 Nitrogen/Protein Analyzer features sample load of 2 g, and eliminates need for sample preparation. Large sample size capacity ensures optimum homogeneous analysis, minimizing matrix effects. It has CO₂ adsorber regenerating technology, which is automatically activated to adsorb CO₂ generated during FLASH combustion. Unit includes Peltier water elimination device, Thermal Conductivity Detector, and Thermo Scientific Eager Xperience software.

GOW-MAC Instrument Co.
Bethlehem, PA 18017 8986
May 07, 2008 Optimized for ppb analysis of non-corrosive and corrosive gases such as air, Ar, and He, 19 in. rack mount compatible Series 200DID is computer controlled using keypad with vacuum fluorescence graphical display. It features 24/7 continuous, unattended operation, packed/micro-packed columns, automated valve control, isolated, discrete 4-20 mA outputs, and manual/automatic operation modes. Self-contained instrument eliminates need for any chromatography software.

Ophir-Spiricon Inc.
Logan, UT 84321
May 01, 2008 Enabling quantitative measurement and viewing of CO₂ beams, II-VI-CO2-58 Industrial Laser Beam Analyzer diagnoses faults and corrects issues related to beam stability, alignment, tuning, and optimization. With ability to handle up to 10 kW of power, portable device features 58 mm clear aperture that enables users to measure large laser beams. Laser beam profiling system is designed to work with Pyrocam(TM) III beam profiling camera that delivers 1,000:1 linear dynamic range.

GOW-MAC Instrument Co.
Bethlehem, PA 18017 8986
Apr 22, 2008 Featuring built-in signal amplification and filament protection circuit, Series 100TCD offers application-specific system configurations for analysis of industrial and specialty gases used in various applications. Product is offered as 19 in. rack- or benchtop-mountable unit and incorporates flow system comprised of pneumatically controlled, automatic gas sampling valves; independent flow controls for each column; and laminar flow design.

Picarro Inc.
Sunnyvale, CA 94085
Apr 17, 2008 Used for trace HF (hydrogen fluoride) detection, real-time gas analyzer can measure down to 10 ppt concentrations in ambient air and does not require frequent calibration. It is based on Wavelength-Scanned Cavity Ring Down Spectroscopy technology; offers cross-talk immunity from any other ambient gas component, including varying moisture levels; and can be operated remotely with sampling rates as fast 1 Hz, producing drift-free data with up to 4 digits of precision.

MOCON
Minneapolis, MN 55428 1010
Apr 11, 2008 Measuring 19 x 14.25 x 5.25 in. and weighing less than 20 lb, Series 9000 Total Hydrocarbon Analyzer has active range from less than 10 ppb on high sensitivity version and up to 100% as methane on percent level version. Standard outputs include alarm and fault relays, 0-20 mA or 4-20 mA analog, or RS-232/Ethernet. FlowGuard electronic control of fuel/air and sample delivery to flame ionization detector, with automatic ignition, ensures safety.

AMETEK Process Instruments
Newark, DE 19702
Mar 21, 2008 Used alone or integrated into Continuous Emission Monitor (CEM) systems, Model 9000 RM single- or multi-component gas analyzer is supplied in 19 in., rack-mountable housing. It can be configured to measure most gas species that absorb UV, and optional low range white cell provides longer path length for measuring lower concentrations. Along with resolution of better than 0.02 nm, analyzer offers remote and local access to all parameters for graphing, logging, and trending.

Picarro Inc.
Sunnyvale, CA 94085
Feb 12, 2008 Designed for continuous measurement of Isotopic CO2, CRDS ultra-trace gas analyzers are based on cavity ring down spectroscopy (CRDS) technology and deliver ppb to ppt gas concentration sensitivity without interference. Drift- and maintenance-free products require no consumables and measure single spectral features in compact flow cell with effective path length of up to 12 km. Designed to run unattended for days in remote locations, instruments suited for field and laboratory use.

IN USA, Inc.
Needham, MA 02494
Jan 24, 2008 Able to read and measure low concentrations of dissolved ozone at ppb level, dFFOZ-TR Trace Dissolved Ozone Analyzer is suited for measuring residual ozone in predestruct and postdestruct water loops. Drift-free device utilizes UV light absorption technology and is immune to cross-interference from other gases. Protected in NEMA 4X enclosure, it features replaceable UV lamp that provides service life up to 18 months.

Emerson Process Management
Austin, TX 78754
Jan 17, 2008 X-STREAM(TM) O₂ analyzer incorporates AccuMax(TM) technology that increases boiler and furnace efficiency and reduces emissions. Analyzer includes internal mechanical assembly that stabilizes cell temperature, increasing oxygen measurement accuracy. Also incorporated is Calibration-Recommended Diagnostic which identifies when probe requires calibration, eliminating need to do calibrations on periodic basis.

Sensor Electronics Corp.
Minneapolis, MN 55436
Dec 13, 2007 Utilizing IR, optical sensing technology, SEC DIR Analyzer measures 2 gases simultaneously in process environment. It can sense water vapor, CO2, hydrocarbons, and ethylene oxide, among others. Explosion-proof unit is self-correcting and can work for years without recalibration or adjustments. Operating over temperature, RH, and pressure extremes, analyzer is resistant to dust, dirt, and toxic/corrosive atmospheres. Self-diagnosing fail-safe design advises user of operating status.

GOW-MAC Instrument Co.
Bethlehem, PA 18017 8986
Dec 12, 2007 Offered in 3 variants, Series 1200 Gas Analyzer utilizes detection principle based on spectral emission of argon plasma. There are no valves, carrier gas, or radioactive source. Unit features non-depleting cell; online, continuous trending of nitrogen concentration with no need for sample injection or separation columns; and over-range protection. Ranges include Model 1200-A for 0-2/0-20 ppm, Model 1200-B for 0-20/0-200 ppm, and Model 1200-C for 0-10/0-100 ppm.

Emerson Process Management
Austin, TX 78754
Oct 01, 2007 Offering single- and dual-channel analysis, X-STREAM(TM) Analyzers utilize NDIR/UV/VIS photometry, paramagnetic and electrochemical oxygen, and thermal conductivity sensor technologies. Units include thermostatic control to measure low sample gas concentrations and high dew points. In addition to being intrinsically safe, measuring cells are resistant to solvents and corrosion. Analog and digital I/O, status signal relay outputs, and serial interface with Modbus communication are provided.

Cemtrex Inc.
Farmingdale, NY 11735
Sep 05, 2007 Eliminating need for transferring measuring gas to analyzer through chiller sampling system, Model ZSS Tunable Diode Laser (TDL) based laser gas analyzer facilitates continuous measurements of ammonia, hydrogen chloride, and nitrogen oxides in flue gases emitted from power plants and incinerators. It comes in dust-resistant construction and can be installed before bag filter where gas sampling could not be conducted previously.

Emerson Process Management, Rosemount Div.
Chanhassen, MN 55317
Aug 30, 2007 Offering unrestricted choice of dual measurements, Model 1056 multiparameter analyzer can address turbidity, flow, pH/ORP/ISE, resistivity/conductivity, percent concentration, chlorine, oxygen, ozone, and temperature. Quick-start screens, auto-recognition of each measurement board installed within device, and sensor configuration prompts aid setup, while LCD displays measurement diagnostics and facilitates multilingual, menu-based operation.