Emerson Process Management / Process Analytic Division
Solon, OH 44139
Jul 02, 2008 Able to perform 4 measurements in single enclosure, X-STREAM® Gas Analyzers feature IntrinzX(TM) technology, which uses split cell dual beam photometry and constant comparison of reference signal and measurement signal to achieve intrinsically linear response to changes in concentration. Technology enables sensitivity as low as 0-10 ppm, span drift less than 0.5% per week, and dynamic ranges as large as 0-200 to 50,000 ppm. NEMA 4X/IP66 and flameproof versions are available.

Brinkmann Instruments Canada, Ltd.
Westbury, NY 11590
Jun 23, 2008 Utilizing micro sample loops, overflow pipettes, pumps, valves, stirrers, and Dosinos®, Metrohm® ProcessLab analyses pH, acid value, chloride and vitamin C, all without operator intervention. It can be equipped with high-speed homogenizer for dissolution of solids as well as hot water to dissolve powders. Hermetical separation of electronics resists dust/liquids, while industrial PC and PLC driven controller allows for extensive communication within process environment.

Thermo Fisher Scientific
Newington, NH 03802
Jun 16, 2008 Thermo Scientific FLASH 4000 Nitrogen/Protein Analyzer features sample load of 2 g, and eliminates need for sample preparation. Large sample size capacity ensures optimum homogeneous analysis, minimizing matrix effects. It has CO₂ adsorber regenerating technology, which is automatically activated to adsorb CO₂ generated during FLASH combustion. Unit includes Peltier water elimination device, Thermal Conductivity Detector, and Thermo Scientific Eager Xperience software.

Aspex Corp.
Delmont, PA 15626
May 16, 2008 Combining optics of scanning electron microscope with elemental analysis capabilities of energy dispersive spectrometer, Metal Quality Analyzer(TM) dynamically scans steel specimens collected from ladle or final product, then counts, sizes, and identifies impurities that can lead to caster clogging, wasted material, and furnace downtime. Results are delivered in minutes, and data from reports can be used to continuously monitor and improve steel making practices.

Emerson Process Management / Process Liquid Division / Uniloc Division
Irvine, CA 92606
May 16, 2008 Rosemount Analytical® Model 1056-HT and 1056-DP are 4-wire, dual-input analyzers that feature, respectively, complete HART® and Profibus® DP digital communications. HART-enabled analyzer allows remote calibration, continuous monitoring of 4 live process variables, and configuration from AMS® Suite or DeltaV(TM) host applications, legacy DCS, or SCADA systems. Diagnostics allows plants to estimate life of in-process sensors and perform required maintenance on timely basis.

GOW-MAC Instrument Co.
Bethlehem, PA 18017 8986
May 07, 2008 Optimized for ppb analysis of non-corrosive and corrosive gases such as air, Ar, and He, 19 in. rack mount compatible Series 200DID is computer controlled using keypad with vacuum fluorescence graphical display. It features 24/7 continuous, unattended operation, packed/micro-packed columns, automated valve control, isolated, discrete 4-20 mA outputs, and manual/automatic operation modes. Self-contained instrument eliminates need for any chromatography software.

Ophir-Spiricon Inc.
Logan, UT 84321
May 01, 2008 Enabling quantitative measurement and viewing of CO₂ beams, II-VI-CO2-58 Industrial Laser Beam Analyzer diagnoses faults and corrects issues related to beam stability, alignment, tuning, and optimization. With ability to handle up to 10 kW of power, portable device features 58 mm clear aperture that enables users to measure large laser beams. Laser beam profiling system is designed to work with Pyrocam(TM) III beam profiling camera that delivers 1,000:1 linear dynamic range.

A2 Technologies, LLC
Danbury, CT 06810
Apr 29, 2008 Designed for lubrication analysis in various power industry systems, PAL instruments quantify water levels from 50-5,000 ppm in oils with accuracy of better than 5%. Products utilize Fourier Transform Infrared (FTIR) method, which requires no hazardous reagents. In addition to measuring water level, systems immediately yield amount of oxidation and nitration byproducts present as well as amount of anti-oxidation, anti-wear, and extreme pressure additives that remain in lubricant.

MaxCyte, Inc
Gaithersburg, MD 20878
Apr 23, 2008 Used for reagent-free preparative transfection based on flow electroporation technology, ITF Inline Transfection System is sterile, closed system available for drug discovery and screening applications. Validated and scalable platform enables transient transfection of any kind of cell or cell line with any molecule at scales ranging from micro-liters to liter volumes. It can be used to transfect 10⁵-10⁷ cells in seconds and up to 10¹⁰ cells in under 30 min.

GOW-MAC Instrument Co.
Bethlehem, PA 18017 8986
Apr 22, 2008 Featuring built-in signal amplification and filament protection circuit, Series 100TCD offers application-specific system configurations for analysis of industrial and specialty gases used in various applications. Product is offered as 19 in. rack- or benchtop-mountable unit and incorporates flow system comprised of pneumatically controlled, automatic gas sampling valves; independent flow controls for each column; and laminar flow design.

Picarro Inc.
Sunnyvale, CA 94085
Apr 17, 2008 Used for trace HF (hydrogen fluoride) detection, real-time gas analyzer can measure down to 10 ppt concentrations in ambient air and does not require frequent calibration. It is based on Wavelength-Scanned Cavity Ring Down Spectroscopy technology; offers cross-talk immunity from any other ambient gas component, including varying moisture levels; and can be operated remotely with sampling rates as fast 1 Hz, producing drift-free data with up to 4 digits of precision.

MOCON
Minneapolis, MN 55428 1010
Apr 11, 2008 Measuring 19 x 14.25 x 5.25 in. and weighing less than 20 lb, Series 9000 Total Hydrocarbon Analyzer has active range from less than 10 ppb on high sensitivity version and up to 100% as methane on percent level version. Standard outputs include alarm and fault relays, 0-20 mA or 4-20 mA analog, or RS-232/Ethernet. FlowGuard electronic control of fuel/air and sample delivery to flame ionization detector, with automatic ignition, ensures safety.

AMETEK Process Instruments
Newark, DE 19702
Mar 21, 2008 Used alone or integrated into Continuous Emission Monitor (CEM) systems, Model 9000 RM single- or multi-component gas analyzer is supplied in 19 in., rack-mountable housing. It can be configured to measure most gas species that absorb UV, and optional low range white cell provides longer path length for measuring lower concentrations. Along with resolution of better than 0.02 nm, analyzer offers remote and local access to all parameters for graphing, logging, and trending.

Beckman Coulter, Inc.
Fullerton, CA 92834-3100
Mar 13, 2008 Consolidating chemistry and immunoassay testing targeted to high-volume laboratories, UniCel DxC 880i Synchron® Access® clinical system offers menu of more than 150 different chemistry and immunoassay tests, with 120 onboard. System can process up to 1,440 chemistry and 400 immunoassay tests/hr, respectively. It features closed-tube sampling and closed-tube aliquotting capabilities to eliminate de-capping and re-capping steps in laboratory process.

Picarro Inc.
Sunnyvale, CA 94085
Mar 11, 2008 Deployed in field or laboratory, Isotropic Water Vapor Analyzer measures oxygen and hydrogen isotopes in water vapor. Device measures single spectral features in flow cell with effective path length up to 12 km. High resolution and resulting specificity enable analyzer to discriminate between closely spaced spectral lines arising from different isotopic compositions in sample gas. Instrument is suited for source of origin monitoring, as well as water cycle and climate studies.

Industrial Test Systems, Inc.
Rock Hill, SC 29730
Mar 07, 2008 Featuring built-in sample cell/cuvette, eXact® EZ Advanced Photometric System eliminates handling of cells to promote precision while also eliminating aggravation of lost/broken cells. Reagent delivery device, eXact® Strip, allows simultaneous introduction of reagents that must normally be kept segregated. Accurate to 0.01 mg/L, meter offers 25+ parameters for analysis and is designed to minimize test time. Meter cell capacity is 10 mL.

Picarro Inc.
Sunnyvale, CA 94085
Feb 12, 2008 Designed for continuous measurement of Isotopic CO2, CRDS ultra-trace gas analyzers are based on cavity ring down spectroscopy (CRDS) technology and deliver ppb to ppt gas concentration sensitivity without interference. Drift- and maintenance-free products require no consumables and measure single spectral features in compact flow cell with effective path length of up to 12 km. Designed to run unattended for days in remote locations, instruments suited for field and laboratory use.

IN USA, Inc.
Needham, MA 02494
Jan 24, 2008 Able to read and measure low concentrations of dissolved ozone at ppb level, dFFOZ-TR Trace Dissolved Ozone Analyzer is suited for measuring residual ozone in predestruct and postdestruct water loops. Drift-free device utilizes UV light absorption technology and is immune to cross-interference from other gases. Protected in NEMA 4X enclosure, it features replaceable UV lamp that provides service life up to 18 months.

Emerson Process Management
Austin, TX 78754
Jan 17, 2008 X-STREAM(TM) O₂ analyzer incorporates AccuMax(TM) technology that increases boiler and furnace efficiency and reduces emissions. Analyzer includes internal mechanical assembly that stabilizes cell temperature, increasing oxygen measurement accuracy. Also incorporated is Calibration-Recommended Diagnostic which identifies when probe requires calibration, eliminating need to do calibrations on periodic basis.

Mettler Toledo, Inc.
Columbus, OH 43240
Jan 10, 2008 Entry level ReactIR(TM) 15m is suited for organic chemist who needs chemical information, while high end ReactIR(TM) 45m is tool for chemical engineers and technologists who focus on process optimization and characterization. Designed for monitoring reactions that involve nitriles, ketenes, metal carbonyls, or isocyanates, SiComp AgX FiberConduit(TM) is silicon-based ATR sensor integrated with AgX fiber technology.