Matrix Metrologies, Inc.
Holbrook, NY 11741
Mar 30, 2007 Matrix XRF spectrometers can be configured with gas-proportional, Si-PIN, or silicon drift type detectors and primary beam filtration to provide non-destructive verification of RoHS restricted elements at 1,000 or 100 ppm action level. Able to measure total lead, mercury, chromium, bromine, and cadmium, bench-top systems also allow for lead content quantification. Products are suited for use on plating applications in metal finishing and electronic industries.

Spectro Analytical Instruments Inc.
Marlborough, MA 01752
Mar 08, 2007 SPECTRO iQ II features Silicon Drift Detector unit derived from SPECTRO XEPOS XRF, as well as software control interface allowing addition of optional touch-screen computer and structure menus enabling non-technical personnel to start, monitor, evaluate, and document analytical processes. It uses polarized excitation to perform multi-elemental analysis of solid, powder, and liquid samples for process control.

AXSUN Technologies Inc.
Billerica, MA 01821
Mar 05, 2007 Handheld, battery-operated Anavo(TM) Analyzer features micro-optical platform that combines tunable laser technology, MEMS tunable filter, and wavelength and power calibration in single optical chip. On-board material libraries and analysis software enable instantaneous material identification. Analyzer is suitable for applications ranging from plastics and polymer recycling, to incoming raw materials inspection and field measurements in food and agriculture industry.

ExonHit Therapeutics Inc
Gaithersburg, MD 20877
Mar 02, 2007 Human GW (genome wide) SpliceArray(TM) enables research and clinical communities to proceed with comprehensive analysis of human genome. It monitors 23,000+ human genes, covering 130,000+ expressed transcripts, and requires over 6 million probes to help elucidate diversity of human proteome. Able to detect all known and novel expressed transcripts, solution interrogates both exons and splice junctions to accelerate diagnosis of chronic diseases.

Roche Diagnostics
Indianapolis, IN 46256
Feb 27, 2007 Operating independently, as dedicated STAT analyzer, or as part of networked clinical laboratory environment, cobas e 411 analyzer provides results for critical assays Troponin T, CK-MB, Myoglobin, and HCG in 9 minutes. Electrochemiluminescence (ECL) delivers low-end sensitivity and broad dynamic range, and eliminates unnecessary repeats and reruns by providing accurate results first time. Product delivers high level of accuracy and efficiency for IA testing.

JASCO, Inc.
Easton, MD 21601
Feb 13, 2007 Offering manual or fully automated injections, Preparative SFE/SFC system has modular design and back-pressure regulator that allows control of system pressure regardless of solvent composition and flowrate. Repetitive injections can be performed to overlay chromatographic runs, and detection choices include UV and/or CD with MS interface capability. With CD detector option, spectral purity monitoring of chiral molecules using g-factor output of CD detector is standard.

Agilent Technologies, Inc
Santa Clara, CA 95051
Feb 05, 2007 With built-in and calibrated jitter sources for simulating random jitter, periodic jitter, and bounded uncorrelated jitter, J-BERT N4903A 7 and 12.5 Gbps pattern generators enable characterization and compliance testing of high-speed serial interfaces. They test robustness against differential-mode or single-mode noise and can inject commonly used spread spectrum clocks. Units can be used in combination with oscilloscopes, built-in error detectors, or other analyzers.

Oxford Instruments Analytical
High Wycombe HP12 3SE  United Kingdom
Jan 30, 2007 Suited for scrap sorting, QC, and metal verification, X MET3000TX+ delivers color-coded alloy identification and assay analysis with one pull of its trigger. Tube-based XRF analyzer utilizes PentaPIN(TM) detector, which minimizes required concentration levels during measurement. Configured for analyzing and identifying metal alloys according to application requirements, software facilitates interpretation of alloy grade and detection of harmful tramp elements.

AMETEK, Advanced Measurement Technology, Inc.
Oak Ridge, TN 37831-0895
Jan 17, 2007 Suited for universities and researchers running multiple tests simultaneously, Ortec® Aspec-927 consists of single-width Nuclear Instrument Module that provides 2 complete 16 K channels for use with analog spectroscopy amplifiers. Device has USB 2.0 connection for interfacing with PC and comes complete with MAESTRO analytical software. Zero Dead Time corrections are included without additional modules or software.

Thermo Electron Corp.
Waltham, MA 02454
Jan 08, 2007 Built to withstand continuous use in severe conditions, Orion 1100 Series combines 6-button operation with LCD display and IP66 rating. Orion 1102PH features auto-buffer-recognition to provide choice of US, NIST, and pure low-ionic pH buffer standards. Incorporating Galvanic oxygen probe technology, Orion 1103DO dissolved oxygen monitor takes 40-50 sec to attain 95% of actual readings, while Orion 1104CD conductivity monitor offers 7 ranges and max measurement range of 1,000 mS/cm.

Analytical Technology, Inc.
Oaks, PA 19426
Nov 21, 2006 Combining direct measuring polarographic sensor and circular chart recorder, Model B20 provides 24-hr or 7-day recording of chlorine residuals in measuring ranges adjustable from 0-5 or 0-20 ppm. Sensor utilizes polymeric membrane to isolate sensing electrodes from sample and eliminate potential for electrode contamination. Clear, constant-head flowcell assembly maintains desired flow. Model B20 is housed in NEMA 3 enclosure with circular glass viewing window.

PBI-Dansensor America Inc.
Glen Rock, NJ 07452
Nov 09, 2006 CheckMate II headspace gas analyzer tests O₂, CO, and O₂/CO₂ gas mix in shelf-stable modified atmosphere packaging (MAP). Self-diagnostics function monitors analyzer, detects and captures errors, sets off warning alarms, and prints error messages along with test results. Device accommodates 500 different programs to sort and test data, and self-teaching menu guide features test selections, alarm settings, product names, and multi-language/symbols converting tool.

Thermo Electron Corp.
Waltham, MA 02454
Oct 23, 2006 Designed for analysis of small samples, NITON XLt 797X portable analyzer is used for on-site testing and identification of polymers, solders, and individual electronic components for RoHS, ELV, and WEEE compliance screening. With miniature x-ray tube technology and internal color video camera, product also includes test stand, NDT remote control, and video tracking software.

Becton Dickinson & Co.
San Jose, CA 95131
Oct 12, 2006 Supporting 6-color flow cytometry IVD application for routine HIV/AIDS monitoring using one-tube test, benchtop BD FACSCanto(TM) II offers low sample contamination of less than 0.1% between tests and processing speeds up to 10,000 events/sec. It provides automated sample loading with BD FACS(TM) loader or BD(TM) High Throughput Sampler option, enabling walk-away sample acquisition. Integrated fluidics cart holds all fluids necessary for routine operation and maintenance.

Sensicore
Ann Arbor,, MI 48108
Oct 06, 2006 Designed to chemically profile water samples, handheld WaterPOINT 870 provides actionable information in minutes. Module adds capability for EPA-approved free and total chlorine turbidity and intrinsic color testing, plus colorimetric tests for nitrate, nitrite, fluoride, phosphate, iron, and copper, as well as EPA ETV verified cyanide test. Menu-driven lab-on-chip system stores up to 250 water profiles. Test results can be downloaded wirelessly or through USB or RS232 interface.

SciLabware (formerly Barloworld Scientific)
Staffordshire ST15 0SA  United Kingdom
Jul 18, 2006 Suited for multiple users, SSL3 Labscale Gyratory Rockers feature max platform dimensions of 14 x 14 in. with speed range of 5-70 rpm and max load of 22 lb. Angle of tilt is adjustable by hand from 7-12°. Supplied with non-slip mat, units operate in temperatures up to 40°C and humidity up to 80%. Providing digital selection of speed and time, rockers are suited for low foaming agitation, DNA extractions, staining and de-staining procedures.

Severn Trent Services
Fort Washington, PA 19034-2707
Jul 11, 2006 Suited for clean water and all types of raw water, MicroScatter 90° monitors turbidity ranging from 0-200 NTU. System is menu-prompted to walk user through set-up, calibration, and operation. Optional programmable alarm board for high/low logic and dead band is available. Sensors are US EPA Method 180.1 and ISO 7027 compliant, and can be located up to 50 ft from analyzer. To facilitate installation, systems are available already mounted on back panel and fully wired.

Agilent Technologies, Inc.
Palo Alto, CA 94303
Jul 07, 2006 Comprised of B1500A Semiconductor Device Analyzer, pulse generator, digital oscilloscope, application software, and pulsed IV accessories, parametric test solution provides pulsed IV measurements as narrow as 10 ns. It enables accurate testing of thermally or charge-sensitive devices and requires no programming. Along with 1 µA current resolution, system offers support for switching between standard dc and pulsed IV characterization without changing cables.

Perma Pure Inc.
Toms River, NJ 08754
Jun 28, 2006 Suited for continuous emissions monitoring, GASS(TM)-2040 prepares gas samples for analysis. It uses Nafion® technology to remove acid mists, coalescent liquids, water, and particulates without altering concentrations of analyte gases. Unit, which features NEMA-4x stainless steel enclosure and integral stack mounting capability, connects directly to probe and dries sample completely before transporting it to ground. Drying is continuous, self-regenerating process.

SciLabware (formerly Barloworld Scientific)
Staffordshire ST15 0SA  United Kingdom
Jun 26, 2006 SMP10 Digital Melting Point Apparatus features 3 digit LED display and offers simultaneous testing of two samples. Removable viewing cover allows block to be cleaned and bulb changed. Block is open at both ends so blockages can be cleared. Unit has temperature range to 300°C, temperature resolution to 1°C, accuracy to 1% of display temperature, with ramp rates of 20°C to plateau and 2°C/min to melt.