Brookfield Engineering Laboratories, Inc.
Middleboro, MA 02346
Jul 07, 2008 Including both Compression and Tension mode, CT3 Texture Analyzer offers load cells in 100, 1,000, 1,500, and 4,500 g as well as 10 kg limit. It features wide speed range for probe movement, USB port for direct connection to any PC, and optional temperature probe. With large vertical work area for large sample placement, stand-alone analyzer features 7 test modes such as normal, hold time, cycle count, bloom, TPA, tension, and static load calibrator check.

JDSU
San Jose, CA 95131
Jul 03, 2008 Optimized for development and manufacturing of optical transmission network elements, MAP-200 provides fiber optic power measurement and signal management tools. It offers compliance with LAN eXtensions for Instruments standards, user-friendly controls, and multi-language GUI. Mainframe comes in 3-slot configuration as well as 19 in. rack, 8-slot configuration with either front- or rear-facing orientation for optimal fiber routing.

Emerson Process Management / Process Analytic Division
Solon, OH 44139
Jul 02, 2008 Able to perform 4 measurements in single enclosure, X-STREAM® Gas Analyzers feature IntrinzX(TM) technology, which uses split cell dual beam photometry and constant comparison of reference signal and measurement signal to achieve intrinsically linear response to changes in concentration. Technology enables sensitivity as low as 0-10 ppm, span drift less than 0.5% per week, and dynamic ranges as large as 0-200 to 50,000 ppm. NEMA 4X/IP66 and flameproof versions are available.

Tektronix, Inc.
Beaverton, OR 97077
Jun 30, 2008 Designed for field measurements, handheld Model SA2600 combines spectrum analyzer with intuitive user controls for classifying and locating analog and digital RF transmissions. DPX(TM) waveform image processor delivers live RF view of spectrum by processing greater than 2,500 spectrum measurements/sec. Featuring 20 MHz real-time bandwidth and 153 dBm Displayed Average Noise Level, analyzer provides 100% probability of intercept for transients with minimum event durations of 500 µs.

Detroit Precision Hommel
Rochester Hills, MI 48309
Jun 27, 2008 Able to measure roughness and contour of any shape in 1 pass, HOMMEL nanoscan can measure surfaces with stroke of 24 mm with resolution of 0.68 nm. Laser interferometer features resolution of 0.6 nm, allowing surface structures from submicrometer range to 24 or 48 mm to be recorded. CNC-controlled horizontal and vertical axes include digital scales providing resolution of 10 nm and probe arms are magnetically coupled on traverse unit to simplify handling, operation, and safety.

Keithley Instruments, Inc.
Cleveland, OH 44139 1891
Jun 27, 2008 With DSP-based software-defined radio architecture, Model 2820 RF Vector Signal Analyzer and Model 2920 RF Vector Signal Generator allow users to test WiMAX in any frequency band between 400 MHz and 4 GHz. They support 802.16e mobile WiMAX Wave 2 testing with up to 4 x 4 MIMO channels. SignalMeister(TM) v2.0 PC-based object-orientated waveform creation tool allows engineers to create highly complex signals required for RF testing and is optimized for MIMO signals.

Agilent Technologies, Inc
Santa Clara, CA 95051
Jun 27, 2008 Supporting 2 software licenses, WireScope Pro enables administrators to validate and pre-qualify quality of VoIP services and to test Ethernet connections. License option N2640A-030 activates VoIP test function, which delivers MOS value and R-factor of SIP based VoIP services, according to ITU-T G.107. License option N2640A-011 activates traffic generation up to Gigabit line rate, suitable to stress test Ethernet links, and to validate traffic steering capabilities of network infrastructure.

LeCroy Corp.
Chestnut Ridge, NY 10977
Jun 25, 2008 With FlexRay physical layer test package that provides eye diagram mask testing and physical layer measurement parameters, WaveRunner Xi oscilloscope offers triggering, protocol decoding, and physical layer test in single instrument. Suited for automotive embedded controller design and debugging, it includes advanced FlexRay tools and trigger and decode tools for CAN, LIN, I2C, SPI UART. FlexRay physical layer supports 10, 5, and 2.5 Mbps standard data rates.

Brinkmann Instruments, Inc.
Westbury, NY 11590
Jun 23, 2008 Utilizing micro sample loops, overflow pipettes, pumps, valves, stirrers, and Dosinos®, Metrohm® ProcessLab analyses pH, acid value, chloride and vitamin C, all without operator intervention. It can be equipped with high-speed homogenizer for dissolution of solids as well as hot water to dissolve powders. Hermetical separation of electronics resists dust/liquids, while industrial PC and PLC driven controller allows for extensive communication within process environment.

Antx, Inc.
Austin, TX 78720
Jun 17, 2008 Combining GPS, GSM, CDMA cellular or satellite modem, and CANbus or J1708/J1587 communication, Messenger monitoring, reporting, and alarm notification system uses serial port to monitor Parameter Identification (PID) using J1587 protocol. Data values are extracted from PID, used in calculations, compared to limits, and passed to Internet-based applications. Housed in watertight enclosure, Messenger connects to diagnostic port on diesel engine-based equipment using 6-conductor connector.

Thermo Fisher Scientific
Newington, NH 03802
Jun 16, 2008 Thermo Scientific FLASH 4000 Nitrogen/Protein Analyzer features sample load of 2 g, and eliminates need for sample preparation. Large sample size capacity ensures optimum homogeneous analysis, minimizing matrix effects. It has CO₂ adsorber regenerating technology, which is automatically activated to adsorb CO₂ generated during FLASH combustion. Unit includes Peltier water elimination device, Thermal Conductivity Detector, and Thermo Scientific Eager Xperience software.

Pentek Inc.
Upper Saddle River, NJ 07458
Jun 13, 2008 Built on XP Pro workstation with 17 in. LCD, RTS 2721 features 2.4 TB disk storage via 13, 2.5 in. HDDs: one handles OS, others act as dual RAID arrays dedicated for real-time recording/playback. Solution digitizes 2 analog input signals at sample rates to 125 MHz, handling IF input signals with center frequencies to 300 MHz or baseband signals to 60 MHz. With programmable decimation factors from 2 to 32,768, digital downconverter output signal bandwidths can range from 8 kHz to 60 MHz.

Agilent Technologies, Inc
Santa Clara, CA 95051
Jun 13, 2008 With nonlinear vector network analyzer capability, PNA-X Microwave Network Analyzer can measure calibrated amplitude and cross-frequency relative phase of measured spectra from 10 MHz to 26.5 GHz. Requiring minimal external hardware, NVNA software converts 4-port PNA-X into high-performance nonlinear analyzer, providing nonlinear component characterization, nonlinear scattering parameters called X-parameters, and nonlinear pulse envelope domain capabilities.

Teltronics, Inc.
Sarasota, FL 34243
Jun 11, 2008 Detecting impairments before they impact customers and end users, Intelligent Service Level Management (iSLM) Solution includes Nortel CS1000 Monitor and one IP telephony switch-agnostic Voice Quality probe (VQProbe(TM)). Nortel CS1000 Monitor Probe receives, captures, processes, tracks, displays, and reports performance metrics in Nortel IP Telephony environment. VQProbe enables proactive monitoring of real-time and completed voice calls to ensure optimal performance.

Antx, Inc.
Austin, TX 78720
Jun 10, 2008 Combining GPS, GSM, CDMA cellular or Satellite modem, CAN bus communication, and alarm notification, Messenger includes firmware that supports satellite communication to back-end Internet-based applications. OEM unit monitors Parameter Group Numbers using J1939 protocol at rates up to 1.25 Mbit/sec. Housed in water-tight enclosure, Messenger connects to diagnostic port on diesel engine-based equipment to monitor rpm, engine hours, oil and coolant temperatures and pressures, and fuel level.

SICK, Inc.
Minneapolis, MN 55438
Jun 05, 2008 Providing pass/fail output, Inspector Vision Sensor verifies completeness and quality of product regardless of angle/orientation as it comes down line. Unit features 384 x 384 resolution, IP 67 metal housing, and integrated dome light that delivers high quality images even on glossy and reflective surfaces. Applications include verifying label position, date code presence and cap inspection in packaging, as well as bowl feeder inspection and verification of part assembly.

ThinkCP(TM) Technologies
Irvine, CA 92606
May 29, 2008 Using ThinkTankQ(TM) ORTEN-MP, administrators can identify, document, and mitigate security breaches or denial-of-service attacks as they first occur. System consists of 2U enclosure with 1-4 Multi-Core AMD® Opteron processors, 128 GB memory, 6 TB SATA2 storage via 6 hot-swappable drive bays, redundant power supplies, and 2 GigE ports. Integrated InterMapper 5.0 software lets users monitor networks in real-time, 30-second or faster user-defined intervals from geographical mapping perspective.

3M Company / Electronic Products Division
Austin, TX 78769
May 29, 2008 Incorporating voiceband spectrum analyzer, Dynatel 965AMS provides graphical representation of voiceband frequency spectrum, enabling technicians to identify noise sources that contribute to metallic noise or power influence readings. Live differential TDR option allows outside plant technician to capture baseline trace on troubled pair then view live trace as stress voltage is applied. Optional all-in-one modem module provides VDSL2, ADSL2+, ADSL2, ADSL, and Ethernet connectivity.

Audio Precision, Inc.
Beaverton, OR 97075
May 28, 2008 Suited for R/D engineers and production technicians, APx525 and APx520 offer one-click measurements, automated measurement sequencer, and continuous sweep technology that can derive 14 measurements in 7 sec. Model APx525 has 2 balanced and 2 unbalanced analog I/O in addition to 192K DIO, while APx520 has equal performance and as many analog connectors but no DIO. Both can generate signals down to 0.1 Hz and enable CMRR measurements in accordance with IEC60268 section 14.15.1.

Saelig Co., Inc.
Fairport, NY 14450
May 20, 2008 Able to measure dc currents from mA to several kA, KLARI-CORD2 16-bit module can simultaneously measure voltages and temperatures using external sensors. Offered in 85 x 110 x 35 mm IP65 metal housing, it tests and records vehicle power consumption and battery charge data at ambient temperatures ranging from -40 to +85°C. Power consumption is under 3 mA (12 V supply voltage, 1 measuring cycle/sec.) Unit has USB mini plug, with CAN, RS232, and power supply being fed via 15-pin Sub-D plug.