GAO Tek Inc.    Toronto M1B2K4  Canada
Jul 28, 2009 Used for measuring PCM devices, digital switches, carrier wave communication devices, and VoIP devices, model 2038 features high resolution color LCD, flexible control modes, and Windows style interface. It supports equal step sequence of frequency spots or customized spots where number of spots is selectable. With remote control via USB or Ethernet interface, device allows users to develop and design voice channel measurement/control systems under variety of different conditions.

GAO Instruments Inc.,    Toronto   Canada
Jul 28, 2009 Featuring 2 RF F-Type input ports and large LCD screen, model A0500014 handheld signal level analyzer can test CATV signal levels in both channel (SCAN) and frequency (SPECTRUM) modes. It also measures CATV TILT, C/N, and Trunk Cable voltage, and can store 24 groups of scanned data (up to 100 channels per group). Windows compatible software is included for system set up, offering functions such as auto-off time setup, channel plan selection, and channel edition.

AMETEK, Advanced Measurement Technology, Inc.    Oak Ridge, TN 37831-0895
Jul 27, 2009 Completely operable without PC, DigiDART-LF provides users with portable SMART multi-channel analyzer for sodium iodide, lanthanum bromide, and other scintillation detectors. Various measurements can be performed directly in-field or on-site, and internal memory stores spectra. Built-in LCD and control keypad create live display as data is acquired, while design promotes digital stability, optimized data throughput rates, and up to 12 hr of operation from one battery charge.

Spirent Communications plc    Crawley   United Kingdom
Jul 24, 2009 Spirent GSS6700 Multi-GNSS Constellation Simulator is suited for verification testing of GPS, GLONASS, and Galileo devices that use commercial multiGNSS signals. It also supports augmentation system and interference testing and offers range of scenarios to minimize test development time. Range of software is available and options include dynamic and flexible interference signal generation, vehicle sensor emulation, and Local Area Augmentation System (LAAS) support.

JDSU    San Jose, CA 95131
Jul 24, 2009 Using one module and one GUI for all interfaces up to 10G, T-BERD®/MTS-6000A facilitates testing of Ethernet over SONET/SDH. GUI guides users directly to trouble-causing network layer, accelerating identification and resolution. In addition to standard SONET/SDH test capabilities, solution provides flexibility to set up and analyze VCAT structures as well as verify transformation of asynchronous Ethernet frames into synchronous SONET/SDH containers.

Aeroflex/Weinschel, Inc.    Frederick, MD 21703
Jul 23, 2009 Enabling TD-LTE infrastructure equipment vendors to test performance of TD-LTE base stations under loaded conditions, TM500 TD-LTE Multi-UE accelerates infrastructure equipment development programs. Unit replicates multiple TD-LTE handsets in single test mobile, simplifying complex tasks such as functional network testing with multi-UEs and performance measurement of resource scheduling algorithms. System also offers handset configuration and measurement capabilities.

Sierra Monitor Corp.    Milpitas, CA 95035 6825
Jul 23, 2009 Network-enabled smart gas sensor, 5100-06-IT, is standalone module with integral alarm relays and 6-month (180 day) calibration interval. Integration to existing plant-wide safety and monitoring systems is facilitated via 4-20 mA output, RS-485 Modbus interface, SentryBus interface, optional integral relay output, and digital display. Non-intrusive calibration, remote sensor option, and 316 SS enclosure options are also available.

Audio Precision, Inc.    Beaverton, OR 97075
Jul 23, 2009 With APx500 Series audio analyzer, audio engineers are able to test loudspeakers/PA monitors and drivers in various consumer products. Unit, which features interface that simplifies defining of time gate, automatically calculates key acoustic response measurements, with 14 graphed measurements returned in 6 sec. Synchronous averaging and Nth-octave smoothing are also included. Onscreen results can be printed to PDF or exported in table format for use in other applications.

Sciemetric Instruments Inc.    Ontario K2K 2P5  Canada
Jul 23, 2009 Featuring optimized setup interface, sigPOD PSV is used to test or monitor any operation during manufacturing. System can be used on up to 8 channels and includes data collection options, analysis, signal conditioning, as well as data management and reporting features. Equipped with Process Signature Verification software, user configurable solution also includes processing/analysis engine, touchscreen display, and various connectivity options.

GAO Instruments Inc.,    Toronto   Canada
Jul 23, 2009 Designed to measure and display signal amplitude at specific frequency or any carrier as defined, A0500003 supports C/N measurement, voltmeter functions, spectrum analysis, auto test, and data logging. It can test analog, digital (QAM), and FM channels, and can detect occasional disturbances using peak-hold level measurement feature in LEVEL and SPECTRUM mode. Suited for CATV testing, meter features high resolution LCD and data transmission interface.

inXitu Inc.    Mountain View, CA 94043
Jul 22, 2009 Capable of measuring 3 distinct polymorphic TGA phases; alpha, beta, and beta-prime, BTX benchtop XRD/XRF analyzer can be positioned close to production process for resolution of issues arising when changing process parameters or raw materials. Based on simultaneous collection of X-ray pattern, system analyzes and identifies key phases in just 30 sec. Analyzer is suited for manufacturers of edible fats such as margarine, shortening, chocolate, cakes, candies, muffins, and biscuits.

EXFO    Quebec G1M 2K2  Canada
Jul 21, 2009 Designed for ROADM/PTN/CWDM turn-up and multiservice testing, 4-slot FTB aids telecommunication network installation, maintenance, and troubleshooting. Portable test platform simultaneously runs optical spectrum analyzer and SONET/SDH, OTN, Ethernet, and Fibre Channel analyzer for ROADM and PTN network turn-up. CWDM turn-up and multiservice configurations use CWDM-dedicated OTDRs and optical spectrum analyzers, 1/10 GbE test modules, and 10 Gb SONET/SDH analyzers.

EXFO    Quebec G1M 2K2  Canada
Jul 21, 2009 By combining 2 one-slot FTB-7400E Metro/CWDM OTDR test platform modules in FTB-200 Compact Platform, service providers benefit from 8-wavelength solution that contributes to maintaining high QoS by enabling mux/demux testing to locate faults in network. Platform features selected wavelengths from 1470-1610 nm and lets service providers test from head-end without interfering with other users. Also, FTB-200 Compact Platform offers CWDM-calibrated power meter.

SWECO®, Div. of M-I L.L.C.    Florence, KY 41022
Jul 16, 2009 Developed for plastics industry, DC Classifier(TM) utilizes either positive or negative air flow to draw moisture and heat away from particulates to dry/cool material. Material continues through machine to classification stages, where oversize and fine particles can be removed. Modular decks facilitate removal for cleaning in-between process changes, when more than one material type or color is processed in same machine, and casters are available to meet mobility requirements.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Jul 15, 2009 Designed for wireless installation and maintenance, handheld FieldFox RF Analyzer offers 1.5 updates/sec in 20 MHz span and dynamic range of 96 dB in spectrum analyzer mode. Unit analyzes uplink and downlink TDD signals as well as TD-SCDMA, and provides one-button measurements of channel power, ACPR, and OBW. Using spectrogram and waterfall display, interference analyzer option detects and monitors intermittent interference signals in field.

MetaGeek, LLC    Boise, ID 83704
Jul 15, 2009 Featuring external RP-SMA antenna, USB-based Wi-Spy 900x lets users view, troubleshoot, and optimize wireless environments. It tracks all radio activity from devices over 862-928 MHz range with resolution from 24-750 KHz and bandwidth resolution from 54-600 KHz. Integrating with this device, Chanalyzer v3.3 software can graphically display which channels to use and which to avoid by obtaining real-time radio data, recording for future analysis, and identifying interfering devices.

Rohde & Schwarz GmbH & Co      Germany
Jul 14, 2009 Model FSV40 measures 1 GHz span at 1 kHz resolution in 2.5 sec and provides internal tracking generator of up to 7 GHz for scalar network analysis. Microwave generators can be connected to attain frequencies up to 40 GHz. Inherent noise of -139 dBm at 40 GHz combined with +18 dBm third-order intercept allows measurement of spurious emissions without distortions at high sensitivity. Features include touchscreen and on-screen keyboard for manual alignments.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Jul 14, 2009 Operating at DC and from 10 Hz to 100 kHz, single unit U8903A audio analyzer helps engineers and technicians measure audio performance in applications such as wireless audio, analog components and ICs, and consumer audio. It features 5.7 in. color display and one-button selection of major operating modes. Application note describing compatible equivalent commands and providing sample test programs comparing old R2D2 codes with U8903A SCPI commands appears in automated applications.

Detcon, Inc.    The Woodlands, TX 77387 8067
Jul 14, 2009 With measurement range of 0-1,000 ppm, High Range Model 1000-H2S provides continuous, accurate, and real-time reading of H₂S in various gas streams. It employs 3-electrode electrochemical sensor element and features microprocessor-based signal-conditioning transmitter with local digital display, fault supervision, calibration mode indicator, 4-20 mA, alarm relays, and RS-485 serial port outputs. Instrument package is rated (explosion-proof) Class I, Div I, Groups B, C, D.

Colasoft Co., Ltd.    Chengdu 610041  China
Jul 14, 2009 Run under Windows® 2000/XP/2003/Vista/7, Capsa Packet Sniffer v6.9 R2 lets users perform real-time capture of network traffic and monitor network 24/7. Enterprise-class network analyzer (network sniffer/packer sniffer/protocol analyzer) delivers comprehensive view of complex network traffic and can be used to troubleshoot network performance problems. Over 300 network protocols can be identified and analyzed, along with applications based on them.