Casella USA    Amherst, NH 03031
Jan 19, 2010 Designed to perform short-term, environmental noise assessments, pocket-sized Model CEL-621 offers functions ranging from simple baseline surveys to full 1/3rd octave band analysis. Device uses all-digital technology that can measure in just one span up to 140 dB. High-resolution display presents results in color-coded format that minimizes risk of misinterpretation, while on-board memory and USB download allow data to be included in reports without special software.

GAO Instruments Inc.,    Toronto   Canada
Jan 06, 2010 Suited for installation and troubleshooting of E1, DS3, STM-1/OC-3, STM-4/OC-12, and STM-16/OC-48 lines, Model A0300026 features soft-define simulated LED 10.4 in. TFT LCD touch screen for alarm status indication. Unit provides performance, anomaly/defect, overhead, and point analysis, as well as automatic tributary scan, automatic protection switching, and round trip delay measurement. With 128 M memory, unit can store test results and configurations.

The Modal Shop, Inc.    Cincinnati, OH 45241
Jan 05, 2010 Designed for use in production, Noise, Vibration, and Harshness Testing System provides non-destructive testing of calipers, anchors, and disks with throughput rates of 1 part/sec using Resonant Acoustic Method. Automated software reporting allows for part-specific information to be automatically or manually input on per part basis. By measuring, reporting, and archiving natural frequencies of brake components, system ensures NVH requirements are met on every piece.

Instek    Chino, CA 91710
Dec 28, 2009 APS-1102 AC/DC power source also offers features for testing and characteristic analysis of power supplies, electronic devices, components, and modules. Functionality allows free programming of outputs for simulation of power source with abnormal variations, and output function includes 2 main modes that can be combined with any of 4 signal sources. Capable of multiple real-time measurement functions, power source has 5.7 in. LCD screen, USB interface, and 1 kVA capacity.

E Instruments International LLC    Langhorne, PA 19047
Dec 28, 2009 Suited for use in boiler, burner, engine, turbine, furnace, and other combustion applications, lightweight E6500 offers wireless communications with computer and other Windows devices, and comes with 6 gas sensors; O₂, CO, NO, NO₂, SO₂, and H₂S. It has built-in printer, and internal water trap with automatic condensate removal. Unit provides stack gas and ambient air temperature measurements, as well as draft and differential pressure measurements.

LeCroy Corp.    Chestnut Ridge, NY 10977
Dec 28, 2009 Supporting PCIe® 3.0 specification, Summit(TM) T3-16 captures, decodes, and analyzes PCIe bus traffic at data rates to 8 GT/sec per lane on bus widths up to 16 lanes. Each data view displays PCIe 3.0 transactions in unique ways to discover hard-to-find protocol errors. This enables flaws in power state transitions in LTSSM and improper credit flow exchanges to be found, tracked to their source, and resolved. Additionally, unit offers real-time statistics monitoring and documentation tools.

Tektronix, Inc.    Beaverton, OR 97077
Dec 23, 2009 Designed to complement MSO/DPO4000 Series oscilloscopes, Model DPO4USB automates key measurement and analysis tasks on USB 2.0 low-speed, full-speed, and high-speed buses, enabling engineers to troubleshoot and debug designs. Module instantly decodes protocol, presenting acquired waveforms and decoded data packets time-aligned on oscilloscope display, and provides ability to automatically trigger on and then search for specific packet level content.

Siemens Industry, Inc.    Elk Grove Village, IL 60007
Dec 18, 2009 Available in FM 1D1 and ATEX versions for Zones I and II, Sitrans SL combines benefits of tunable diode laser technology with direct operating mode close to process. Non-interfering inline reference cell enables laser locking independent of process gas concentration. Laser light is sent from transmitter, through process gas, and arrives at detector on receiver side. Since bandwidth of laser light is narrow, only gas component of interest will interact with it, providing accurate O2 analysis.

E Instruments International LLC    Langhorne, PA 19047
Dec 16, 2009 Utilizing 6 electrochemical sensors and 3 NDIR sensors, Model E8500 offers portable tool for EPA compliance level emissions monitoring and testing in boiler, burner, engine, turbine, furnace, and other combustion applications. Unit features real-time software package, built-in printer, and internal thermoelectric chiller with automatic condensate removal. It provides stack gas and ambient air temperature measurements as well as draft and differential pressure measurements.

Casella USA    Amherst, NH 03031
Dec 07, 2009 Model CEL-350 dBadge(TM) micro noise dosimeter measures employee noise exposure over working day and helps assure compliance with OSHA, NIOSH, or ISO standards. Attaching to shirt, overalls, or hardhat, it is operated via 2 side buttons and includes display and indicating LED. It has 64 KB memory, storing 180 hr of data, and captures time history for every noise event, logged in 1 min intervals. Unit's software allows generation of user-defined databases for reporting.

Mocon    Minneapolis, MN 55428
Dec 03, 2009 OpTech(TM) uses platinum fluorescent material to measure oxygen (O2) transmission rates and supports film cells as optional add-ons, enabling measurement of perforated flexible packaging structures and high-barrier alternatives. Offered in 50 and 100 cm² sizes, film cells integrate fluorescing sensor that responds to oxygen concentration. This enables O2 measurement down to 10 ppm over 0.001 to 25% range with operation insensitive to ambient light.

Malvern Instruments Inc.    Westborough, MA 01581
Dec 03, 2009 Measuring as many as 20,000 particles/sec, Parsum IPP 70 is suited for monitoring gravity fed, pneumatically conveyed, and fluidized streams with particles ranging from 50-6,000 microns and travelling at velocities to 50 m/s. Parsum View UI simplifies system use as PAT (Process Analytical Technology) tool for continuous monitoring of granulation, spray drying, and fluidized bed operations. It provides data security and complete audit trail to meet record keeping requirements.

LEDAS Ltd.    Novosibirsk   Russian Federation
Dec 02, 2009 Based on LGS 3D geometric constraint solving software component, Driving Dimensions v1.2 makes advanced MCAD technology available to all users of Google SketchUp software. Any dimension/parameter can be modified in any SketchUp model with one click, and all driving dimensions set in one model are satisfied simultaneously. Only changes that occur are those needed to satisfy new parameter values. Solution also supports translation of tooltips and system messages into other languages.

VTI Instruments Corporation    Irvine, CA 92614
Nov 24, 2009 Equipped with 16 input channels, Model EX1200-7416 can continuously monitor variety of analog and discrete signals up to 100 V. Each channel has 8-bit DAC that can be independently programmed to set trip level. Model EX1200-7416 also detects transients that cannot normally be captured by typical DMM or scanning measurement system. As part of EX1200 LXI Class A instrument series, module records events with IEEE 1588 time codes to provide precise correlation of event/time data.

Solar Metrology    Holbrook, NY 11714
Nov 24, 2009 Consisting of atmospheric in-line x-ray fluorescence metrology tool platform, System SMX-ILH provides composition and thickness measurements for thin film solar PV metal film stacks on flexible roll to roll substrates such as stainless steel, aluminum, and polyimide or rigid substrates such as float glass. Remote SMX-ILH models are designed to measure in one static location or across gradient. Typical measurement applications include Mo thickness and all CIGS combinations.

Pico Technology Ltd    St Neots Cambridge PE19 1QB  United Kingdom
Nov 20, 2009 Featuring 350 MHz bandwidth on all 4 channels and 1 GS memory buffer, PicoScope 6000 Series can connect to any Windows® XP/Vista/7 computer with USB 2.0 interface. Standard capabilities include spectrum analysis, advanced triggering, and serial decoding. Additional features include built-in function generator, arbitrary waveform generator, mask limit testing, switchable bandwidth limiting on each channel, as well as switchable 1 MW and 50 W inputs.

Emerson Process Management / Process Liquid Division / Uniloc Division    Irvine, CA 92606
Nov 19, 2009 Measuring up to 6 sample streams sequentially, Rosemount® Analytical online wet chemistry analyzers for sodium, silica, phosphate, hydrazine, and ammonia are used for process monitoring in power and ultrapure water industries. Routine reagent replacement and maintenance takes 5 min every 3 months, while replacing valve pump requires ~15 min every 2 years. Reagents are ready-to-use, without chemical solutions to prepare/standardize, and self-diagnostics validate measurement accuracy.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Nov 18, 2009 Infiniium 90008 Series, comprised of hybrid digital storage oscilloscope and digitizer instruments, offers 8 channels that deliver digitizing rates of 40 GSPS and bandwidths from 8-13 GHz. Used individually or combined, products offer full-bandwidth probing solutions and accurate de-embedding and equalization capabilities to ensure optimal real-time measurement accuracy. Each 8-channel module has 2 PCs that run application software and provide standard I/O functionality.

Coherent Inc., Laser Group    Santa Clara, CA 95054-1112
Nov 18, 2009 PowerMax(TM) USB/RS sensors include signal processing and power measurement electronics inside USB 2.0 or RS-232 cable connector. Units connect directly to PC and include PowerMax PC applications software with virtual instrument interface, which enables operator to take laser power readings, log data, and compute measurement statistics. Suited for various applications, sensors provide accurate laser power measurement from deep UV to IR over µW to kW power range.

Renishaw, Inc.    Hoffman Estates, IL 60192
Nov 17, 2009 AxiSet(TM) Check-Up enables users of 5-axis machining centers and multi-tasking mill-turn machines to identify and report on poor machine alignments and geometry. After automated probing routines gather performance data from reference artefact, measurement results are output to PC where supplied Microsoft® Excel® spreadsheet presents analysis of data and compares machine performance with defined tolerances.