PAC Petroleum Analyzer Company L.P.
Pasadena, TX 77503
Oct 09, 2009 Compact, automated, and multi-configurable ANTEK MultiTek(TM) is one testing system capable of detection and analysis of unwanted chemicals, pollutants, contaminants, and corrosive elements. Specifically, it detects sulfur, nitrogen, and halides through process that includes combustion Ion Chromatography, Ultraviolet Fluorescence, and Chemiluminescence technologies. This platform works with solid, liquid, gas, and LPG samples.

Anritsu Co.
Morgan Hill, CA 95046
Oct 09, 2009 Combining DC coverage and wide dynamic range time domain capability, VectorStar 4-port Test Sets include Model MN4694B, which covers up to 40 GHz and Model MN4697B with frequency range up to 70 GHz. Both include bias tees for active measurement applications and measurement speed of 30 µs/point. Units are suited for digital engineers that need to conduct signal integrity measurements on passive high-speed balanced transmission lines and connections.

Agilent Technologies, Inc
Santa Clara, CA 95051
Oct 08, 2009 Incorporating advanced viewing and analysis, Infiniium 9000 Series can debug and test variety of traditional signals and buses used in embedded designs. Mixed-signal units offer MIPI-DPHY compliance test and protocol analysis, accelerating development of wireless mobile products employing MIPI standards. Engineers using scopes can see SATA 1 information at physical and protocol layers. For development teams using 3 Gbs SATA II standard, 9000 Series offers both compliance and protocol support.

Epigentek Group Inc.
Brooklyn, NY 11226
Oct 07, 2009 SuperSense(TM) Methylated DNA Quantification Kit fluorometrically measures global DNA methylation shifts, overcoming limitations such as need for special equipment, long protocols, low sensitivity, and radioactivity. Assay can be completed in 3 steps within 2.5 hr via 96-well plate format. With detection limit as low as 50 pg of methylated DNA, kit is suitable for quantifying methylated DNA using minimal DNA sample quantities.

Agilent Technologies, Inc
Santa Clara, CA 95051
Oct 06, 2009 Models U1818A and U1818B feature high differential input impedance from 100 kHz to 7 or 12 GHz, respectively, and are compatible with Agilent network, spectrum, and signal source analyzers. Devices provide frequency response of ±1.5 dB and noise less than -130 dBm/Hz at 10 MHz to 12 GHz. They also feature biasing from Agilent's RF and microwave instruments probe power port or bench top power supply.

Rohde & Schwarz GmbH & Co
  Germany
Oct 05, 2009 Series ZVA67 features measurement time of 3.5 µs for each test point. Output power is 6 dBm at 67 GHz and unit provides power sweep range of greater than 40 dB, enabling it to characterize small and large signal behavior on active components. Measurement bandwidth of up to 30 MHz allows pulse profile measurements on amplifiers with resolution of 12.5 ns. System also analyzes S-parameters, harmonics, compression, and intermodulation.

Nikon Instruments Inc.
Melville, NY 11747-3064
Oct 05, 2009 Model BW-H501 3D surface profile system features high-speed X-Cycle Imager allowing image capture of 900 fps with output/display of height images at 5 fps. It also integrates BridgeElements software which supports simultaneous capture of multiple images, allowing real-time image comparison. By utilizing fringe cycle method, system can achieve height resolution of 100 nm and perform surface profiling in as little as 200 ms for height of 40 µm.

CAMI Research Inc.
Acton, MA 01720
Oct 02, 2009 Permitting testing for insulation resistance/dielectric breakdown, HVX hipot module checks for opens, shorts, mis-wires, and resistance limits. It applies selectable voltage from 10-1,500 Vdc or 10-1,000 Vrms AC to each connection group in cable. System produces reports for each cable showing parameters such as test voltage, leakage current, and more; denoting PASS or FAIL on top. Safety features include administrator login and automatic halt of test if current exceeds 1.5 mA.

Malvern Instruments Ltd
Malvern Worcestershire WR14 1XZ  United Kingdom
Oct 02, 2009 Designed for Zetasizer Nano particle characterization system, ZEN1010 enables measurement in samples up to 40% w/v. Design incorporates minimized optical path length and takes just 150 µl sample in measurement area. Although it operates as standard cell, ZEN1010 allows zeta potential measurements in highly concentrated samples. By requiring less sample dilution, it supports optimized maintenance of pH and chemical structure of sample for directly relevant zeta potential measurement.

Janis Research Co., Inc.
Wilmington, MA 01887
Oct 02, 2009 Micromanipulated probe system with horizontal external magnetic field features typical loss rate of less than 0.8 Lph at 5K and operates from 3-475K, with option up to 650K. Vibration level is ±25 nm and long-term drift is approximately 2 nm/min. Featuring cryogenic Hall probe and readout to measure magnetic field value at chuck, and supported on floating vibration isolation table, system includes micoroscope, CCD camera, and monitor with resolutions of 2-5 microns.

GAO Instruments Inc.,
Toronto   Canada
Oct 02, 2009 Operating at frequencies of 5-870 MHz, model A0500015 measures CATV TILT, C/N, and trunk cable voltage. It can test CATV signals accurately in both channel (SCAN) and frequency (SPECTRUM) modes, and can scan up to 125 channels at speed of 30 channels/min. Featuring 128 x 64 matrix backlit LCD screen for clear display of test results, analyzer stores 23 groups of scanned data with up to 100 channels per group.

Averna Technologies
Montreal (Quebec) H3C 2M7  Canada
Sep 30, 2009 URT(TM) v5.0 lets RF manufacturers generate, record, and play back common radio, video, and navigation signals. While GUI facilitates operation, feature set eliminates manual entry of waypoints to accommodate need for reduced scenario creation time and efficient TMC testing. NAVASIM Toolkit lets users create routes and scenarios using Tele Atlas maps, while G-SIM Toolkit offers GPS Simulator software designed for real-time GPS L1 C/A constellation simulation for up to 12 satellites.

LeCroy Corp.
Chestnut Ridge, NY 10977
Sep 29, 2009 Supporting PCI Express® 3.0 specification, Summit(TM) T3-16 captures, decodes, and analyzes PCI Express bus traffic at data rates up to 8 GT/sec per lane on bus widths up to 16 lanes. Based on CATC Trace(TM) architecture, each data view displays PCIe 3.0 transactions in unique ways to discover hard-to-find protocol errors. Documentation tools include protocol traffic summaries, detailed error reports, scripting, and ability to create user-defined test reports.

Solar Metrology
Holbrook, NY 11714
Sep 28, 2009 Utilizing X-ray fluorescence, it-situ System SMX-ISI provides composition and thickness measurements for thin film solar PV metal film stacks on flexible roll to roll substrates such as stainless steel, aluminum, and polyimide or rigid substrates such as float glass. Typical measurement applications include Mo thickness and all CIGS combinations. System can be integrated into any vacuum deposition tool, vacuum process station, or point of vacuum process line.

GAO Instruments Inc.,
Toronto   Canada
Sep 25, 2009 Handheld model A0300009 is used to verify QoS of datacom transmission channels in access networks, transmission networks, digital data networks, and private communication networks. Specifically, it monitors/controls handshaking signals and supports measurements of error blocks and clock slips. Various interfaces are supported, and device can be configured to DTE or DCE and ASYNC or SYNC mode. Memory stores up to 4 groups of test results, which can be uploaded to PC via serial port.

EXFO
Quebec G1M 2K2  Canada
Sep 23, 2009 Enabling characterization of amplitude- or phase-modulated signals, PSO-200 Optical Modulation Analyzer provides bandwidth suitable to allow constellation and eye-diagram analysis of signals with baud rates up to 100 Gbaud. Signals can be analyzed at up to 400 Gbit/sec when using 4-symbol modulation format such as DP-QPSK. Detailed amplitude and phase patterns can be obtained to offer pulse-shape analysis for transmitter optimization/troubleshooting.

GL Communications Inc.
Gaithersburg, MD 20877
Sep 21, 2009 Delivering means to assess end-to-end VoIP performance, VQuad(TM) can perform manual or automated tests on up to 8 sessions simultaneously. It can connect and test VoIP networks at endpoints in various ways: direct Ethernet connection using SIP; Dual UTA/2Wire connection to an ATA or router; Dual UTA/RJ-22 handset interface; Dual UTA/4-Wire sound card interface; and Bluetooth to mobile phone. Other features include automatic call control and traffic generation/reception.

Agilent Technologies, Inc
Santa Clara, CA 95051
Sep 21, 2009 Optical modulation analyzer offers turnkey test solution for development and characterization of 40G/100G transmission systems. Necessary receiver is integrated for counting errors and calculating bit error ratio (BER) from detected data in real-time or in large sample number capture modus. Along with detailed analysis of ones and zero errors, system supports polarization multiplexed signals as well as Pseudo Random Bit Sequence (PRBS) or test signal with user-defined pattern.

GAO Tek Inc.
Toronto M1B2K4  Canada
Sep 21, 2009 Designed for installation, acceptance, and maintenance testing of digital transmission systems, model 2120 performs channel testing, alarm analysis, fault detection, and signal analysis of E1 (2 Mb/sec) lines. Product monitors any voice channel at receiving terminal, measures signal voltage and frequency at same time, and displays status of transmission circuit. Test Manager Software suite allows for analysis of tests and measurements, as well as result archiving and printout.

Servomex Group Ltd
Crowborough East Su TN6 3DU  United Kingdom
Sep 21, 2009 Suited for in-situ cross stack measurements in harsh environments, SERVOTOUGH Laser analyzers detect wide range of gases including O₂, HCl, HF, NH₃, CO, CO₂, H₂O, H₂S, HCN, NO, N₂O, CH₄, and other hydrocarbons. They incorporate Tuneable Diode Laser Absorption Spectroscopy technology as complementary technique to paramagnetic, zirconium oxide, and infra red technologies. With no moving parts or consumables, analyzers suit range of emissions control and process and combustion control applications.