Agilent Technologies, Inc.    Santa Clara, CA 95051
Jul 07, 2006 Comprised of B1500A Semiconductor Device Analyzer, pulse generator, digital oscilloscope, application software, and pulsed IV accessories, parametric test solution provides pulsed IV measurements as narrow as 10 ns. It enables accurate testing of thermally or charge-sensitive devices and requires no programming. Along with 1 µA current resolution, system offers support for switching between standard dc and pulsed IV characterization without changing cables.

Applied Analytics, Inc.    Concord, MA 01742
Jul 03, 2006 Fiber optic UV VIS diode array process spectrometer, OMA-405, suits applications requiring monitoring of single- and multi-component concentrations. With no moving parts, product fits 19 in. rack and is controlled via embedded Windows XP industrial computer with touchscreen interface. Stream composition is obtained through continuous measurement and analysis of spectrum using 1,024-element diode array in wavelength range of 190-800 nm with resolution of 1 nm.

Cellomics, Inc.    Pittsburgh, PA 15219
Jun 29, 2006 ArrayScan® VTI High-Content Screening (HCS) Reader is available with VTI Live module option, which enables users to run automated live-cell kinetic assays. In addition to incubation chamber used to maintain controlled environment for cells under study, module offers kinetics software that automatically extracts and analyzes images and data from experiments over course of time. Incubation chamber features configurable temperature, CO₂, and humidity controls.

Perma Pure Inc.    Toms River, NJ 08754
Jun 28, 2006 Suited for continuous emissions monitoring, GASS(TM)-2040 prepares gas samples for analysis. It uses Nafion® technology to remove acid mists, coalescent liquids, water, and particulates without altering concentrations of analyte gases. Unit, which features NEMA-4x stainless steel enclosure and integral stack mounting capability, connects directly to probe and dries sample completely before transporting it to ground. Drying is continuous, self-regenerating process.

SciLabware (formerly Barloworld Scientific)    Staffordshire ST15 0SA  United Kingdom
Jun 26, 2006 SMP10 Digital Melting Point Apparatus features 3 digit LED display and offers simultaneous testing of two samples. Removable viewing cover allows block to be cleaned and bulb changed. Block is open at both ends so blockages can be cleared. Unit has temperature range to 300°C, temperature resolution to 1°C, accuracy to 1% of display temperature, with ramp rates of 20°C to plateau and 2°C/min to melt.

Servomex Group Ltd    Crowborough East Su TN6 3DU  United Kingdom
Jun 22, 2006 Designed to complement 2200 Series process oxygen analyzers, 2200H transmitter withstands sample temperatures up to 135°C, eliminating need to condense hot sample prior to analysis. It measures oxygen content from 0-100% with response time of less than 4 sec. Approved for use in ATEX category 2 applications, transmitter is certified intrinsically safe and sealed to IP66/NEMA 4X. Up to six 2200H transmitters can be linked to single Servomex 2200 control unit.

Sunrise Telecom Inc.    San Jose, CA 95119
Jun 21, 2006 Home Test Toolkit (HTT) test set accelerates deployment of IPTV services delivered over Fiber to the Node (FTTN) systems. Equipped with over 10 FTTN test functions needed for in-home analysis, product lets technicians assess key interfaces and signals at customer location during installation. HTT can integrate into existing back office systems, allowing results from each installation to be recorded for analysis and quality control. Results can be uploaded via Ethernet or Bluetooth®.

Sunrise Telecom Inc.    San Jose, CA 95119
Jun 20, 2006 SunSet® Modular Test Toolkit (SSMTT)-41 module is designed for testing VDSL-based triple-play network deployments. In addition to verifying inside wiring is capable of supporting IPTV signals, unit verifies cable continuity, detects broken diplexers, provides cable identification, and estimates cable length. Multifunctional test tool includes VDSL modem, HPNA analyzer, RF signal level meter, spectrum analyzer, and wiring test features.

Emerson Process Management, Rosemount Div.    Chanhassen, MN 55317
Jun 20, 2006 Rosemount® Analytical CAT 100 continuous gas analyzer transmitter suits hydrogen cooled turbine generators in electrical power plants. On-line thermal conductivity TCD analyzer has three measuring ranges that monitor hydrogen purity during normal operation and allow safe opening of turbine for maintenance.

Malvern Instruments Inc.    Westborough, MA 01581
Jun 19, 2006 Insitec LPS provides continuous measurement of particle size in liquid streams ranging from highly concentrated mineral slurries to lipid emulsions. Each component in system, including sampler, pre-diluter, cascasde diluter, measurement cell, and software, can be individually tailored to process. Sampler extracts 2.5 ml liquid slugs from full pipe section, while pre-diluter and cascade diluter work together to bring sample to optimal concentration for analysis.

Associated Research, Inc.    Lake Forest, IL 60045
Jun 19, 2006 OMNIA® and HypotULTRA® III series electrical safety testers are available with optional Data/Interface card, which provides choice in communication protocols as well as method to log test data. Data/Interface card features serial port configurable for RS-232 or RS-485 communication, and PS/2 input allows for bar code scanning directly from tester. Data collection port works directly with provided 256 MB flash memory stick.

Radcom Equipment Inc.    Paramus, NJ 07652
Jun 19, 2006 Powered by Gear Set(TM) processing engine, R70 Probe offers unified platform for ILECs and cable and cellular operators facing challenge of restructuring networks to offer next-generation services. Linux-based solution enables data processing at rate of up to 10 Gbps, independent of technology, service, or protocol stack. Upgradeable component can manage future service demands while monitoring traffic on growing number of interfaces.

Pall Corp.    East Hills, NY 11548
Jun 16, 2006 Ascotec(TM) AirCapt Multipoint MP8+(TM) and MiniCapt PS1(TM) are, respectively, remote and portable systems that enable biopharmaceutical companies to increase predictability and accuracy of microbial samples. They use BioCapt(TM) impactor sampler technology and have 90 mm wide rectangular slits that create recognizable pattern of microorganisms on assay media surface. This enables random contamination present outside controlled impact region on assay plate to be distinguished.

Audio Precision, Inc.    Beaverton, OR 97075
Jun 15, 2006 Able to take multiple measurements simultaneously, PC-controlled APx585 employs user-interface that let users automate test sequences without any programming. Test sequences are supported with integrated reporting facility and reports are exportable. To facilitate design team collaboration, project file structure includes all measurement settings and automated sequences. Along with real-time input signal monitors and general-purpose FFT analyzer, product uses continuous sweep method.

Bede    Durham DH1 1TW  United Kingdom
Jun 13, 2006 Sensitive to dislocations, precipitates, mechanically introduced cracks, and inclusions, BedeScan(TM) defect inspection system is capable of looking at process induced defects on surface of wafer and detects crystallographic abnormalities inside wafer that can lead to wafer breakage. System monitors pin marks, thermal slip dislocations, misfit dislocations, back-side and front-side scratches, as well as surface and buried mechanical edge damage.

LitePoint Corporation    Sunnyvale, CA 94085
Jun 13, 2006 Based on integrated vector signal analyzer and vector signal generator architecture, IQmax(TM) system tests devices based on WirelessMAN OFDM PHY standards, including all bandwidth and data rate options. Dual RF ports are selectable for Tx or Rx operation and support 3.3-3.8 GHz frequency band. IQsignal Analysis Suite provides instrument set-up, control, and analysis functions including RF and I&Q graphs, frequency spectrogram, power spectral density, and constellation diagrams.

TAC    Carrollton, TX 75006
Jun 13, 2006 Weighing less than 1 lb, portable Roam IO2 provides wireless field access to controller point information. Compact hardware adapter offers mobility through local connection to field bus or Ethernet network or wireless connection with Bluetooth® adapter. It automatically discovers and edits BACnet devices from third parties as well as TAC Andover Continuum(TM) BACnet and Infinet(TM) controllers on network, providing multiple displays of entire BACnet system.

Midac Corp.    Irvine, CA 92614 6016
Jun 13, 2006 Combining FTIR spectrometer system, gas cells, sample manifold, valve control electronics, and software, Titan-OL Systems provide real-time, multi-point, multi-component quantitative gas analysis. Fiber optic distribution electronics provide single hub for temperature, pressure, mass flow, external alarm, and optical switching signals and can accommodate up to four 12-port manifolds for total of 48 sample, purge, and calibration lines. Gas cells are available in path lengths from 1 cm to 30 m.

JDSU    San Jose, CA 95131
Jun 09, 2006 Combining 2.5/2.7 G optical and electrical interfaces with 2.5/2.7 G jitter/wander feature, Models ONT-506 and ONT-512 provide physical layer jitter/wander testing from 155 Mb/s to 43 Gb/s. Compliant to ITU-T O.172/O.173, units measure jitter generation, automatic jitter tolerance, and automatic jitter transfer. Additional capabilities include wander analysis of TIE, MTIE/TDEV, frequency offset, and drift rate with graphs and built-in masks.

Elan Digital Systems Ltd    Fareham Hampshire PO15 5SJ  United Kingdom
Jun 08, 2006 Suited for multi-channel applications, pocket-sized USBscope50 uses 2- or 4-port USB hub with flying leads, allowing multiple USBscopes to be operated from single USB port. Unit is fully synchronized in multi-channel mode and also offers full galvanic isolation, which protects both equipment and users from potential electrical shock or damage.