Electro Standards Laboratories    Cranston, RI 02921 3403
Jun 15, 2006 Providing electronics to older tensile testing test frames, Material Tester Upgrade System includes Model 4215 Smart Indicator, load cell and extensometer, and Excel-compatible dataView software, which provides test statistics, data acquisition, setup, calibration, and color plotting. Smart Indicator combines force channels, encoder position channels, print capabilities, and RS232/485 serial communications while offering ±999,999 bipolar range display and 24-bit resolution.

Ramtron International Corp.    Colorado Springs, CO 80921
Jun 15, 2006 VersaKit-20xx evaluation platform facilitates system prototyping and design development with VRS51L2070 system-on-chip. Kit features development board to support microcontroller, Versa-JTAG programming/debugging interface, DB25 Parallel Cable, and power supply. Development board incorporates set of probe vias and header footprints for access to chip peripherals and I/Os, RS-232 transceiver and 2 DB9 connectors for UART access, and 2 tact switches for manual reset/interrupt triggering.

H2scan Corp.    Valencia, CA 91355
Jun 15, 2006 Providing real-time measurements in extreme conditions, HY-OPTIMA handheld model 500 and HY-ALERTA in-line model 700 include membrane and coating over sensor die that allows hydrogen to penetrate but prevents penetration of moisture, CO, Sulfur, and other gases. Sensing element of both models utilizes palladium nickel capacitor and palladium nickel resistor for threshold measurements from 15-5,000 ppm. In-line model can operate in process streams up to 125°C.

Audio Precision, Inc.    Beaverton, OR 97075
Jun 15, 2006 Able to take multiple measurements simultaneously, PC-controlled APx585 employs user-interface that let users automate test sequences without any programming. Test sequences are supported with integrated reporting facility and reports are exportable. To facilitate design team collaboration, project file structure includes all measurement settings and automated sequences. Along with real-time input signal monitors and general-purpose FFT analyzer, product uses continuous sweep method.

Omega Engineering, Inc.    Stamford, CT 06907
Jun 15, 2006 Suited for consumable or industrial water applications, FDT100 Series employs 2 flow sensors that alternately transmit and receive signal. Time of flight is used to measure flow rate from 65-1,100 gpm (nominal), depending on flange size. With no moving parts, battery-powered meter exhibits minimal pressure loss and does not require filtration. Product comes with integrally mounted display or remote-mount version and 150 lb, 2-8 in. ANSI flanges.

Electro-Sensors, Inc.    Minnetonka, MN 55343 9108
Jun 14, 2006 Suited for real-time maintenance feedback and machine diagnostics, network-powered SpeedTalker DN (UI) is capable of measuring speed and direction when using bidirectional sensor. Product provides measured shaft RPM from up to 2 input channels along with status of up to 8 independent under/over speed threshold alarms over DeviceNet network. Along with electrically isolated universal differential pulse inputs, tachometer provides isolated 24 Vdc sensor power.

Electro Standards Laboratories    Cranston, RI 02921 3403
Jun 14, 2006 Embedded, digital Model 4327 CellMite(TM) connects directly to strain gage transducer and simultaneously generates serial output for connection to PC and ±10 V analog output for interface to DAQ systems. It has onboard storage for 3 calibrated sensors, each with integrated 6-point calibration and independent user-specified display setup parameters. Along with automatic TEDS-Tag(TM) sensor identification, unit features 16-character auto identifying display that provides direct readout viewing.

HBM, Inc.    Marlborough, MA 01752 3014
Jun 14, 2006 While used for static and dynamic component tests in test benches and test equipment, U10M specifically suits testing applications including double bridge, mechanical adapters, connector variants, or TEDS. Integrated compensating circuit reduces crosstalk between bending moments and lateral forces; bending moments are determined for each transducer individually. Rotationally symmetrical product comes in 9 ranges with nominal values from 1.25-500 kN.

Pitney Bowes    Stamford, CT 06902
Jun 14, 2006 Flexible Bindery Interface helps boost productivity for direct mail lettershops and service bureaus by integrating existing stand-alone bindery process with Pitney Bowes high-speed inserters. It streamlines transfer of printed and folded materials through service bureau's unwinders, cutters, and folders. Folded materials are scanned to help ensure integrity as they exit feeder and can be processed on deck at speeds up to 14,000 mail pieces/hr.

J & L Plastic Molding    Wallingford, CT 06492
Jun 14, 2006 Based on automating and standardizing moldmaking and molding process, Prototype Plus provides design engineers and product developers with way to test new injection molded parts, then seamlessly transition into production. Accommodating both up-and-down and side-action part design, system can produce parts that run on injection molding machines from 28-200 tons, with shot size from 0.5-22 oz. EDM technology may be utilized for intricate shapes and desired finishes.

Transducers Direct    Miamiville, OH 45147
Jun 14, 2006 With measurement range up to 40 µsec, Model TDC-GPX allows distance measuring accuracy of ±1 mm rms to range of 1,500 m for laser range finders, radar, medical imaging scanners, ultrasonic flow meters, and navigation systems. Four selectable modes include 81 psec resolution with 0 to endless measurement range, and 10 psec resolution with 100 nsec to 10 µsec range. Power consumption from 39-45 mA makes unit suited for battery-powered devices.

Avocent Corp.    Huntsville, AL 35805
Jun 14, 2006 Deployed in point-to-point or point-to-multipoint configuration, EWMS1000 Wireless Media Streamer delivers full motion streaming video and audio to multiple display devices. Emerge UNI-8dB directional antenna focuses energy of signal into intensified unidirectional beam. In line-of-sight applications, antenna allows receiver to be placed up to 1,000 ft from transmitter. Transmitter and receiver antennas work in 802.11a band and provide frequency range of 5.150-5.825 GHz.

Bede    Durham DH1 1TW  United Kingdom
Jun 13, 2006 Sensitive to dislocations, precipitates, mechanically introduced cracks, and inclusions, BedeScan(TM) defect inspection system is capable of looking at process induced defects on surface of wafer and detects crystallographic abnormalities inside wafer that can lead to wafer breakage. System monitors pin marks, thermal slip dislocations, misfit dislocations, back-side and front-side scratches, as well as surface and buried mechanical edge damage.

Micro Control Co.    Minneapolis, MN 55432
Jun 13, 2006 LM-1 Logic and Memory Burn-In System has system capacity of 1,536 devices when individual temperature control is required or 6,400 device capacity when conventional burn-in cycle is run. Burn-in-with-test system features 300 A current per burn-in board, programmable temperature control up to 150ºC, and scan mode vector memory up to 1 G deep. Handling up to 32 burn-in boards, system can be customized to burn-in different device types during same cycle.

LitePoint Corporation    Sunnyvale, CA 94085
Jun 13, 2006 Based on integrated vector signal analyzer and vector signal generator architecture, IQmax(TM) system tests devices based on WirelessMAN OFDM PHY standards, including all bandwidth and data rate options. Dual RF ports are selectable for Tx or Rx operation and support 3.3-3.8 GHz frequency band. IQsignal Analysis Suite provides instrument set-up, control, and analysis functions including RF and I&Q graphs, frequency spectrogram, power spectral density, and constellation diagrams.

TAC    Carrollton, TX 75006
Jun 13, 2006 Weighing less than 1 lb, portable Roam IO2 provides wireless field access to controller point information. Compact hardware adapter offers mobility through local connection to field bus or Ethernet network or wireless connection with Bluetooth® adapter. It automatically discovers and edits BACnet devices from third parties as well as TAC Andover Continuum(TM) BACnet and Infinet(TM) controllers on network, providing multiple displays of entire BACnet system.

ZMD    Dresden   Germany
Jun 13, 2006 Suited for use with piezo-resistive bridge sensors, ZMD31015 programmable signal conditioner IC provides real-time diagnostics to detect any faulty connections, shorts, and power loss events. Measured and corrected bridge values are provided at signal pin which can be configured as analog voltage output or as 1-wire serial digital output which can also be used for PC-controlled procedure to program calibration coefficients into on-chip EEPROM.

Bee Valve Inc.    Elyria, OH 44035
Jun 13, 2006 Model 20 dry-filled pressure gauges feature dual scale that offers both psi and bar measurements. Housed in black-painted steel case, bottom mounting gauges are available in 1.5, 2, and 2.5 in. sizes. Pressure ranges available include 0-30 psi vacuum, and 0-30, 0-60, 0-100, 0-150, and 0-300 psi.

Midac Corp.    Irvine, CA 92614 6016
Jun 13, 2006 Combining FTIR spectrometer system, gas cells, sample manifold, valve control electronics, and software, Titan-OL Systems provide real-time, multi-point, multi-component quantitative gas analysis. Fiber optic distribution electronics provide single hub for temperature, pressure, mass flow, external alarm, and optical switching signals and can accommodate up to four 12-port manifolds for total of 48 sample, purge, and calibration lines. Gas cells are available in path lengths from 1 cm to 30 m.

Omega Engineering, Inc.    Stamford, CT 06907
Jun 13, 2006 Along with 16-bit/1 MHz ADC, 2 timer outputs, and four 32-bit counters, OMB-DAQBOARD-3000 Series features 16 analog input channels, user-expandable to 64; up to four 16-bit/1 MHz analog outputs; and 24 digital I/O. Boards are compatible with optional OMB-PDQ30 expansion module, which allows system to accept up to 24 thermocouple inputs. DaqView software enables setup, data logging, and real-time data viewing without any programming skills.