Servomex Group Ltd    Crowborough East Su TN6 3DU  United Kingdom
Jun 22, 2006 Designed to complement 2200 Series process oxygen analyzers, 2200H transmitter withstands sample temperatures up to 135°C, eliminating need to condense hot sample prior to analysis. It measures oxygen content from 0-100% with response time of less than 4 sec. Approved for use in ATEX category 2 applications, transmitter is certified intrinsically safe and sealed to IP66/NEMA 4X. Up to six 2200H transmitters can be linked to single Servomex 2200 control unit.

Optra Inc.    Topsfield, MA 01983
Jun 21, 2006 Battery-powered unit measures, characterizes, and documents laser exposures in support of dosimetry requirements for protection of personnel working with or who could potentially be exposed to laser illumination. It operates autonomously for up to 6 hr against continuous and pulsed laser sources in visible and NIR spectrum. While detecting laser energy, recorder extracts pertinent exposure information and captures JPEG image of scene containing laser.

Omega Engineering, Inc.    Stamford, CT 06907
Jun 21, 2006 Designed for measurement of conductive liquids with virtually no pressure loss, FMG600 Series has PTFE lining and no moving parts. Units can handle applications involving wastewater, pulp, food, and slurries. Standard outputs include analog, frequency, and RS485 communications. Available with optional sanitary tri-clamp mounting, flow meters come in local- and remote-display models and include NIST 3-point calibration.

Sunrise Telecom Inc.    San Jose, CA 95119
Jun 21, 2006 Home Test Toolkit (HTT) test set accelerates deployment of IPTV services delivered over Fiber to the Node (FTTN) systems. Equipped with over 10 FTTN test functions needed for in-home analysis, product lets technicians assess key interfaces and signals at customer location during installation. HTT can integrate into existing back office systems, allowing results from each installation to be recorded for analysis and quality control. Results can be uploaded via Ethernet or Bluetooth®.

PCB Piezotronics Inc.    Depew, NY 14043 2495
Jun 20, 2006 Designed for differential charge output piezoelectric accelerometers, Series 495B10 differential remote charge converters operate from 10-32 Vdc over -13 to +185°F temperature range. Packaged in lightweight aluminum housing, low noise units are available in charge sensitivities of either 2 mV/pC or 10 mV/pC with low frequency roll off of 10, 15, 20, or 25 Hz. Input is 2-pin, 7/16 inch threaded connector and output is 6-pin bayonet-style connector.

Sunrise Telecom Inc.    San Jose, CA 95119
Jun 20, 2006 SunSet® Modular Test Toolkit (SSMTT)-41 module is designed for testing VDSL-based triple-play network deployments. In addition to verifying inside wiring is capable of supporting IPTV signals, unit verifies cable continuity, detects broken diplexers, provides cable identification, and estimates cable length. Multifunctional test tool includes VDSL modem, HPNA analyzer, RF signal level meter, spectrum analyzer, and wiring test features.

Emerson Process Management, Rosemount Div.    Chanhassen, MN 55317
Jun 20, 2006 Rosemount® Analytical CAT 100 continuous gas analyzer transmitter suits hydrogen cooled turbine generators in electrical power plants. On-line thermal conductivity TCD analyzer has three measuring ranges that monitor hydrogen purity during normal operation and allow safe opening of turbine for maintenance.

Malvern Instruments Inc.    Westborough, MA 01581
Jun 19, 2006 Insitec LPS provides continuous measurement of particle size in liquid streams ranging from highly concentrated mineral slurries to lipid emulsions. Each component in system, including sampler, pre-diluter, cascasde diluter, measurement cell, and software, can be individually tailored to process. Sampler extracts 2.5 ml liquid slugs from full pipe section, while pre-diluter and cascade diluter work together to bring sample to optimal concentration for analysis.

Associated Research, Inc.    Lake Forest, IL 60045
Jun 19, 2006 OMNIA® and HypotULTRA® III series electrical safety testers are available with optional Data/Interface card, which provides choice in communication protocols as well as method to log test data. Data/Interface card features serial port configurable for RS-232 or RS-485 communication, and PS/2 input allows for bar code scanning directly from tester. Data collection port works directly with provided 256 MB flash memory stick.

Thermo Electron Corporation    Ecublens CH-1024  Switzerland
Jun 19, 2006 ARL QUANTRIS(TM) optical emission spectrometer can be configured with up to 3 spectrographs to cover wavelengths from 130-780 nm, enabling analysis of all elements of interest in zinc alloys within 35 sec. Each module is flat field spectrograph with single CCD. Product comes with Current Controlled Source, vacuum spectrometer, automatic optical alignment, and spectrum profiling. Electronic spectrograph lets users perform qualitative and semi-quantitative analysis using spectra.

Radcom Equipment Inc.    Paramus, NJ 07652
Jun 19, 2006 Powered by Gear Set(TM) processing engine, R70 Probe offers unified platform for ILECs and cable and cellular operators facing challenge of restructuring networks to offer next-generation services. Linux-based solution enables data processing at rate of up to 10 Gbps, independent of technology, service, or protocol stack. Upgradeable component can manage future service demands while monitoring traffic on growing number of interfaces.

MRV Communications, Inc.    Chatsworth, CA 91311
Jun 19, 2006 Optimized for remote, unstaffed facilities, MRV 7204 Sensor Manager is used to integrate management of environmental and physical events into overall IT management system. This 4-slot, 1U-high chassis can be populated with combination of sensor input and control output modules. With 32-port contact sensor module, system supports up to 128 wet or dry sensors per chassis. Up to four 7204 Sensor Managers can be controlled by one LX Series Console Server.

KineticSystems Co., LLC    Lockport, IL 60441-2200
Jun 16, 2006 Featuring 128 channels of analog input and 16-bit resolution, CP213 single-width, 6U, CompactPCI/PXI module is designed for temperature measurement, powertrain/engine testing, and automated test equipment. ADC scans channels at user selected rate, with various triggers. Differential analog input channels can be software configured as single-ended. Unit also features on-board channel calibration and provides 16 multi-function digital I/O (TTL) in addition to analog input channels.

C & D Technologies    Mansfield, MA 02048-1151
Jun 16, 2006 NMPD series integrates data isolation transformers, power sourcing equipment handshaking and signature control functionality, and UL-approved dc/dc converter delivering isolated dc output of 3.3, 5, 12, or 15 V from nominal 48 V input. Typical signature resistance is 25 kohm and signature capacitance is 100 nF, while classification current is 4 mA. Operating with max output power rating of 10 W, modules extract power from CAT5 twisted pair Ethernet cable.

Scientific Technologies Inc. - Automation Sensors    Logan, UT 84321
Jun 16, 2006 Data Dolphin 400 (DD-400) is available with RS-232 wired communications, Ethernet and RS-485 options. Unit operates in -40 to 75°C temperature range and features 3 C size alkaline batteries to enable clock operation when power is off. Inputs include lightning and static protection. Applications include automation of vendor-managed inventory and strain gauge studies.

Cardinal Scale Co.    Webb City, MO 64870
Jun 16, 2006 With NEMA 4X/IP66 stainless steel washdown enclosure and 1 in. high LCD display, Model 215 Digital Weight Indicator features dual serial ports, 10-key numeric keypad, and multiple print formats. Utilizing 10 AA rechargeable batteries, it powers 8 load cells. Functions include axle weigher operation mode, 3 preset weight comparators, time and date with selectable 12 or 24 hr operation, count feature with accumulator, push button tare, and gross and net conversion.

Freeman Technology    Gloucestershire GL20 8DN  United Kingdom
Jun 16, 2006 Fully automated, universal Model FT4 characterizes powder behavior under aerated, conditioned, consolidated, and vacuum conditions. In vacuum test mode, vacuum is applied to powder sample though system's standard aeration base. Model FT4 allows rapid and systematic investigation of dynamic behavior as function of applied vacuum and other variables, such as flow rate, moisture content, and composition.

Pall Corp.    East Hills, NY 11548
Jun 16, 2006 Ascotec(TM) AirCapt Multipoint MP8+(TM) and MiniCapt PS1(TM) are, respectively, remote and portable systems that enable biopharmaceutical companies to increase predictability and accuracy of microbial samples. They use BioCapt(TM) impactor sampler technology and have 90 mm wide rectangular slits that create recognizable pattern of microorganisms on assay media surface. This enables random contamination present outside controlled impact region on assay plate to be distinguished.

MAZeT Mikroelektronik Anwendungszentrum GmbH      Germany
Jun 16, 2006 Colorimeter 2 MTCS-C2 offers hardware solution for measurement of active light sources such as LED mixed color control. Able to be adapted during design-in project, product integrates complete signal processing, including interface and measurement control. Specific integrations include MTCSiCS true color sensor; MTI04CQ multi-channel, transimpedance amplifier; microcontroller with 10-bit ADC and USB interface, as well as EEPROM.

Phoenix Contact    Harrisburg, PA 17111 0100
Jun 15, 2006 Measuring 22.5 mm wide, DIN-rail mount modules are suited for single- and 3-phase applications. Current monitoring relays handle AC and DC currents from 0-100 mA, 0-1 A, and 0-10 A, while voltage monitoring relays handle single-phase AC and DC voltages from 0-30, 0-60, and 0-500 V. Both types are available in 2 versions: single-function SL version and multifunctional FL version. Devices are configured via potentiometers and rotary switches on front face of modules.