Kittiwake Developments Ltd    West Sussex BN17 7LU  United Kingdom
Aug 15, 2006 Constructed from stainless steel and protected to IP65 or IP67, ANALEXrs Online Moisture Sensors screw directly into oil flow to detect moisture content of water up to oil's saturation point. With self-diagnosing digital and analog outputs, sensors can be integrated into existing condition monitoring and operating control systems. They communicate with existing systems using industry standard 4-20 mA, RS232, RS485, CAN, and 802.11b WLAN outputs.

Elmo USA Corp.    Plainview, NY 11803
Aug 15, 2006 Pocket-sized SUV-CAM Video and Audio Recording System combines microcamera technology, MPEG4 digital recorder, and color TFT 2.2 in. LCD monitor. Featuring 3.8 mm F2.0 lens, microcamera head is waterproof up to 130 ft and is connected to monitor/recorder by 2.53 or 4.92 ft cable. Color ¼ in. CCD has 2:1 interlaced scanning system with 752 x 582 effective pixels. System is suited for handheld or body-worn surveillance, evidence-gathering, and as school bus security device.

E+E Elektronik GmbH    Engerwitzdorf A-4209  Austria
Aug 15, 2006 Hand-held HUMIPORT 05 provides measurement of relative humidity from 5-95% and temperature from -4 to 122°F. Dew point, absolute humidity, and mixing ratio can also be shown, and unit provides one-hand operation with thumb wheel switch. Measured values can be displayed as SI- or US-units, with MIN/MAX, AVG indication, and HOLD-function features provided. Device is suited for monitoring of buildings, switching cabinets, museums, and storehouses.

Thermo Electron Corporation: Chromatography & Mass Spectrometry    San Jose, CA 95134-1991
Aug 15, 2006 Hybrid FTICR Mass Spectrometer, LTQ FT Ultra(TM), analyzes complex matrices and large molecules with resolution in excess of 750,000. Ultra Cell ICR cell design optimizes sensitivity and widens dynamic range to exceed 4,000. System can be equipped with ECD and IRMPD fragmentation techniques, which can be used on LC timescale. Powered by Xcalibur(TM) software, spectrometer can be configured with layered application software including ProSightPC(TM), SIEVE(TM), MetWorks(TM), and BioWorks.

Rudolph Technologies, Inc.    Flanders, NJ 07836
Aug 15, 2006 Inspection tool-set, comprised of NSX(TM) and B20(TM) Systems, features backside color processing capability and auto-die classification. NSX Systems offer frontside inspection, B20 Systems offer backside inspection, and Harmony ASR(TM) (all-surface review) Software offers defect analysis and management. Combined with brightfield and darkfield capabilities, B20 Systems use color processing capability to increase sensitivity to subtle color defects such as chemical stains and micro arcings.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Aug 15, 2006 Offering 7,680 channels per test head, 88000 Series ATS-620 Array Test System supports 7th and 8th generation glass fabrication lines and beyond, and offers multisite test capabilities. It enables electrical testing of all pixels and subpixels covering transistor, capacitor, electrode, and bus lines. Using 4 test heads, multiple gate activation, and 15,360 data channels, system prevents defective pixels in a-Si TFT array from entering next phase of production.

Credence Systems Corp.    Milpitas, CA 95035
Aug 15, 2006 Sapphire(TM) D-40 test system is offered with Modulated Vector Network Analysis (MVNA(TM)) RF measurement option, which adds wireless test capabilities for mobile phone, WLAN, WiMaX, and Zigbee devices. Available in 16- and 32-port RF versions, MVNA RF option has 4-8 parallel receivers to address demands of multi-site applications through 6 GHz. Architecture uses distributed signal processing and encapsulated measurement algorithms to aid test program development.

Credence Systems Corp.    Milpitas, CA 95035
Aug 15, 2006 Combining analog, digital, mixed-signal, and RF test instrumentation, Sapphire(TM) D-40 is designed to move test data from devices under test, through instruments, and into test processors. Scalable data infrastructure allows users to grow data path bandwidth and power availability in segments as test needs grow. Utilizing high-density technology, device leverages cPCI standards and offers data management and parallel test capabilities.

Hitachi High Technologies, Inc.    Schaumburg, IL 60173-2295
Aug 15, 2006 NanoFrontier® LC/MS platform combines separation of nanoLC with sensitivity of linear ion trap (LIT) as well as mass accuracy and resolution of time-of-flight (TOF) mass analyzer. Able to operate in LIT or QIT-TOF mode, hybrid product incorporates features geared towards metabolomics, biomarker discovery and validation, and protein identification. Platform utilizes dual exchange gradient system and Information Based Acquisition technology.

Molecular Devices Corp.    Sunnyvale, CA 94089-1136
Aug 15, 2006 Using homogenous mix-and-read, no-wash protocols, FLIPR Calcium 4 Assay Kit provides screening technique for GPCRs in pharmaceutical drug discovery. It includes masking technology and detects intracellular calcium flux from different cell types and receptors. Kits offer different formulations to address broad range of targets, including chemokines, small peptides, and transient, endogenous, and low-expression receptors.

Palmer Wahl Instrumentation Group    Asheville, NC 28804
Aug 14, 2006 Pocket temperature calibrators are designed for maintenance and commissioning of thermocouple, RTD probes, and transmitters. Featuring simulation, synthesizer, steps, and measurement modes, devices can record data manually or automatically. Wahl TC621 and TC622 measure and simulate with 0.02% accuracy of reading, with temperature coefficients of 15 and 10 ppm/°C, respectively. TC621 includes 14 thermocouple outputs, and TC622 includes 12 different RTD types.

Krohne, Inc.    Peabody, MA 01960-3803
Aug 14, 2006 Loop-powered OPTISWIRL 4070 C multivariable flowmeter combines vortex flow sensor with built-in temperature and pressure compensation for measuring volumetric and mass flow of conductive and non-conductive liquids, gases, and vapors. Intelligent Signal Processing System allows stable readings while eliminating external perturbations. Device features stainless steel structure resistant to corrosion, high pressures, and temperatures. Optional pressure sensor is available.

JM Science, Inc.    Grand Island, NY 14072
Aug 14, 2006 Used in lab or field, Horiba OCMA-350 checks for residual oil on semiconductor parts which have been cleaned and measures oil on any industrial surface. It features removable sampling cell and records time and date of measurement along with each data set. Data evaluation function analyzes readings, determines when value has stabilized, and displays stable value. Messages on LCD screen indicate any electrical malfunctions, irregularities in measurement, and deterioration of parts.

ID Solutions Division, Arch Crown Inc.    Hillside, NJ 07205
Aug 11, 2006 Weighing less than 5 oz, Metrologic Optimus S SP5500 provides users with compact Portable Data Terminal (PDT) capable of self-contained data collection and storage in inventory and information control applications. It includes laser scanner; 8-line, adjustable-font LCD display; alpha numeric keypad; and 2 MB data storage. Included base station charges batteries and enables communication with computer via serial or USB port.

esd electronics, Inc.    Hatfield, MA 01038
Aug 11, 2006 Using UNIVERSE CA912042 VME-PCI bridge for VMEbus connection, PMC-CADDY can operate as slave or master on VMEbus, and can carry up to 2 PMC modules of normal size or 1 double-sized module. Board operates with data width of up to 32 bits, with 32 address signals on VMEbus. VMEbus interrupt can be applied to any of 7 interrupt-request lines. Every plug-in unit of PMC-CADDY has I/O connector, which applies I/O signals of PMC modules to VMEbus connector P2.

RIDGID    Elyria, OH 44035
Aug 11, 2006 Using class II laser, non-contact RIDGID® MicroRay(TM) IR-100 offers trigger activation for immediate temperature measurement. Smart measuring feature lets users adjust emissivity setting via menu bar to match type of material being measured. Able to measure 2 in. spot on heating vent from 2½ ft away, unit offers sensitivity reading from -22 to +932°F within ±1.5% of accuracy (2.7°). It also provides Max and Min differential reading option, audible alarms, and backlit LCD.

Fluke Corp.    Everett, WA 98203
Aug 11, 2006 Designed to calibrate RF test equipment, Model 9640A provides frequency coverage from 10 Hz to 4 GHz with best level accuracy of ±0.05 dB. It outputs pure sinusoidal signal with low harmonic and spurious content, helping eliminate differences between wideband/narrowband and peak/rms sensors without additional external filters. Unit offers signal leveling and attenuation within 50 ohm leveling head, and displays calculated UUT error for calibration certificate documentation.

Fluid Components Intl.    San Marcos, CA 92069 5115
Aug 11, 2006 ST Series Flow Meters incorporate thermal dispersion type mass flow sensing element. ST98 offers IP66 rated enclosure, operates over 0.21-172 NMPS flow range, and is capable of Profibus communications. Designed for line sizes from 6-51 mm, ST75 direct mass flow meter has flow range span of 0.07-1,425 NCMH. ST50 insertion-style mass flow meter for air, compressed air, or nitrogen flow measurements is designed for line sizes from 51-610 mm and operates over flow range of 0.23-122 MPS.

OTEK Corp.    Tucson, AZ 85714
Aug 11, 2006 Packaged in 4 x 2.5 x 4 in. housing with belt clip, Model 420 is designed for calibration/test of DPMs, PLCs, transmitters, sensors, or any other device requiring 4-20 mA current loop signal. Powered by 9 V battery, unit operates down to 6 V and can drive up to 300 ohm loads or sustain up to 7 V burden of load. It features dual full-scale range of 19.99 and 25.0 mA, 10-turn potentiometer, and 3½ digit display that will only turn on if loop is closed.

Fluke Corp.    Everett, WA 98203
Aug 11, 2006 Fluke 5320A simplifies calibration processes by incorporating functionality required to calibrate and verify 9 types of electrical test tools in one instrument. Along with 3 standard interfaces for remote control, product supports MET/CAL® Plus Calibration Measurement Software for automating calibration process and managing calibration laboratory inventory. Color display has GUI that shows users how to make terminal connections between unit-under-test and calibrator.