Conax Buffalo Technologies LLC    Buffalo, NY 14225 4740
Apr 06, 2007 With operating temperatures to 250°F and cabling rated to 500°F continuous, Miniature Bearing Sensors are used in industrial rotating equipment to indicate bearing condition. Products monitor temperature of metal beneath shoe to recognize rising temperature, which can warn of lubricating oil film breakdown. This allows machine shutdown and maintenance to take place before catastrophic failure of bearing and possible damage to its mounting.

austriamicrosystems AG    Premstatten   Austria
Apr 06, 2007 Fully qualified to AEC-Q100, 10-bit AS5140H is suited for harsh automotive and industrial applications with high ambient temperatures. Three differently programmable incremental outputs are available, one which delivers 3-phase commutation signal for brushless DC motors With resolution of 0.35°, IC can recognize 1,024 positions within one 360° turn, accessible with serial or PWM interface. Daisy chain mode allows position data to be read serially over 2-wire bus.

PCB Piezotronics Inc.    Depew, NY 14043 2495
Apr 06, 2007 Intended for ICP®, IEPE, and charge output piezoelectric sensors, Model 482C54 is compatible with accelerometers, microphones, pressure transducers, force sensors, and strain sensors. It has frequency range of 0.05-100 kHz with ±10 V input voltage and ±100,000 pC input charge range. Featuring 4th order 10 kHz low-pass Butterworth filtering, unit is suited for vibration testing, automotive and aerospace component testing, and HALT/HASS/ESS applications.

Laurel Electronics, Inc.    Costa Mesa, CA 92626
Apr 06, 2007 Developing max voltage drop of 2.5 V, 88-PRO may be connected directly to 4-20, 10-50, or 1-5 mA current loop, and does not require additional power. It fits in 1/8 DIN panel cutout and requires 3.66 in. behind panel. While connections for Signal In and Signal Out are made via detachable screw terminal connector, range-selection jumpers and meter's zero and span adjustments are at rear. LCD features 0.50 in. digits, and display range can be extended from ±1,999 to ±19,990 or ±199,900.

Linear Technology Corp.    Milpitas, CA 95035
Apr 06, 2007 Suited for use as voltage monitor or threshold detector, LT6703 features total threshold error of 1.25%, comes in 2 x 2 mm DFN package, and operates with 1.4-1.8 V supply. It requires 6.5 µA of quiescent current and under 10 nA of input bias current. Input accepts voltages from 0-18 V, independent of supply voltage, and open collector output can be pulled up to 18 V, also independent of supply. Operating over -40 to +125°C range, IC features 6.5 mV internal hysteresis.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Apr 06, 2007 Targeting design and test engineers in communications and storage industry, Model N4917A enables users to perform standard conformance testing of optical receiver and transceiver modules operating up to 12.5 Gb/s. System provides accurate test results with calibrated injection of optical modulation amplitude, extinction ratio, and vertical eye closure penalty. Accessory kit enables 10 GBase-LR, -ER, and 10 G Fibre Channel testing.

PCB Piezotronics Inc.    Depew, NY 14043 2495
Apr 05, 2007 Used with charge output piezoelectric accelerometers, as well as force and pressure sensors, Models 422E91, 422E92, and 422E93 offer conversion sensitivities of 0.1, 1.0, and 10 mV/pC, respectively, with frequencies from 1.5 Hz to 50 kHz. Units are 1.6 in. long x 0.25 in. dia with stainless steel housings and 10-32 coaxial I/O connectors. TEDS option permits channel identification, sensitivity interrogation, and coordinate location information to be stored in onboard memory circuit.

GE Security Industrial    Tualatin, OR 97062
Apr 05, 2007 Designed to detect and deter security threats to global supply chain, CommerceGuard(TM) System v3.0 includes readers, automated XML data feeds to track status and locations of shipments, and secure protocol for wireless messaging. Container Security Device is located inside container for protection from sabotage and harsh maritime environment. Security is assured by encrypting all data communications and authenticating all hardware transactions and authorized users.

Pickering Interfaces    Wobum, MA 01801
Apr 05, 2007 Wired Trigger Bus Adapter, Model 60-990, allows Agilent 6000 and 8000 Series mixed signal oscilloscopes to show logical state and analog representations of all 8 LXI WTB channels on single display. Device provides way of exchanging trigger signals with standardized interface that eliminates makeshift wiring, signal routing, switching, and level buffering over distances exceeding 10 m with low latency.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Apr 05, 2007 While offered as entry-level portable test solution, 3 GHz N9320A features measurement speed of 9.2 ms at non zero span and -148 dBm DANL with pre-amp that helps detect low-level signals and determine true characterization of devices. RBW of 10 Hz to 1 MHz helps distinguish close signals and understand circuit, and +13 dBm TOI helps reduce effects of instrument distortion on DUT. One-button measurement functionality facilitates operation, and USB ports aid in data transfer.

Vertilon Corporation    Westford, MA 01886
Apr 05, 2007 Designed for use with multi-element optical sensors, PhotoniQ IQSP480 (32-channel) and IQSP482 (64-channel) achieve 96 dB dynamic range at event rates over 50,000/sec and 25,000/sec across all channels, respectively. Event data is output through USB connection and can be displayed on PC using included GUI or streamed to real-time custom software application. Instruments suit applications utilizing multi-anode photomultiplier tubes (MAPMT) and avalanche photodiode (APD) arrays.

Fujikura Europe Ltd, Fibre Optics Division    Chessington, Surrey KT9 2NY,  United Kingdom
Apr 05, 2007 Used in conjunction with optical power meter, FLS-20T measures optical power loss over fibre network. Hand-held, battery-operated, dual laser light source can operate at 1,310 and 1,550 µm and can incorporate selectable modes of signal from continuous wave light and modulated tones of 270 Hz, 1 kHz, and 2 kHz. Also available, FVI-01 miniature, keyring-size, battery-operated red laser light source is used to identify faults, bends, breaks, and low-quality splices or connections.

Duncan Instruments Canada, Ltd.    Toronto, ON M9L1Z8  Canada
Apr 04, 2007 Model PSI 8031FC Safety-Fused Open-Phase/Phase Sequence Indicator features red, white, and blue fused test leads/crocodile clip assemblies, each rated at 600 V, ½ A, for connecting to ac power lines. Device has 110-600 V operating voltage, with dielectric strength of 5,550 Vac for 1 min and time limit of ac voltage above 500 Vac of 5 min. At 106 x 75 x 40 mm, dual function tester/indicator is housed in fire-retardant plastic and weighs 350 g.

esd electronics, Inc.    Hatfield, MA 01038
Apr 04, 2007 Compliant with ISO 11898 and CAN 2.0B, CAN-PCIe/2000 for PCI Express includes complete opto-isolation, which optimizes reliability and protects CAN board from voltage surges and other electrical interference. Using 2 CAN channels allows access to 2 independent CAN networks, which may run at different baud rates. Board includes CAN monitoring and analyzing software tool as well as extensive programming interface.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Apr 04, 2007 Series 616OT One-Touch(TM) Differential Pressure (DP) Transmitter alleviates cumbersome turn pots and eliminates need to span instrument during calibration. With one digital pushbutton, both Zero and Span are calibrated properly without requiring additional reference pressure sources or separate calibration devices. Wiring is done via removable terminal block. Models come in IP65 housing and are available in ranges from 10-20 in. wc.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Apr 04, 2007 Series DPML-5 is designed with 4 ½ digit LCD display, with choice of red, amber, or green segments that facilitate reading over extended distances. To suit various applications, engineering units are selectable for °F/°C, psi, or percent. Snap-in bezel allows quick installation, without additional mounting hardware, and meter features adjustable zero and span, selectable decimal point position, and selectable 12 or 24 Vdc power supply.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Apr 04, 2007 Able to fine-tune code performance and cache optimization of embedded, multi-channel applications, XDS560(TM) Trace module provides developers with detailed information required to determine where and why complex, intermittent problems occur. Non-intrusive product delivers full, real-time visibility of registers and counters with integrated timestamping and ability to correlate data values to processor Program Counter, enabling developer to reconstruct errors.

Xilinx, Inc.    Sunnyvale, CA 94085
Apr 04, 2007 To accelerate building of 1-8 lane PCIe® applications, Virtex(TM)-5 FPGA Development Kit for PCI Express® includes 8-lane PCI Express add-in card (ML555) and Virtex-5 XC5VLX50T-1FF1136 FPGA. Latter has built-in block for PCI Express endpoint and 3.2 Gbps RocketIO GTP transceivers. Along with protocol pack files, kit provides IP cores, Jungo Ltd Windows driver toolkit, and Windows-based GUI. Reference designs and software, as well as platform USB FPGA download cable, are included.

SciLog, Inc.    Middleton, WI 53562
Apr 04, 2007 Temperature, pressure, and conductivity sensors feature embedded memory for storing data such as calibrations, IDs, and lot numbers, which can then be downloaded into spreadsheet or printed. Sensors can be used once and then disposed of, or they can be sanitized with NaOH or be sterilized by autoclaving, ETO, or gamma. Along with barcode traceability, in-line sensors also enable setting high/low alarms and include 4 TTL alarm outputs.

Ircon Inc.    Niles, IL 60714
Apr 03, 2007 Designed primarily to assist spot weld or induction heat metal treating applications, 2-micron 56-Series Modline 5 Sensors incorporate thermo-electrically cooled detector and internal self-calibration features. Non-contact units have stainless steel NEMA 4-rated housing, high temperature cable, and sealed electrical connectors and electronics. With Total System Health Check capability, sensors automatically verify that they are performing within factory specifications.