Test & Measurement

Protocol Analyzer works with USB Type-C, Power Delivery 2.0.
Testers

Protocol Analyzer works with USB Type-C, Power Delivery 2.0.

Mercury T2C pocket-sized, 5.8 oz, hardware-based USB protocol analyzer supports USB Type-C and Power Delivery 2.0 standards, including capture and decoding of all packets over USB Type-C Configuration Channel (CC). Such CC packets include negotiation of USB current capabilities and entrance to/exit from Alternate Modes. Included adapters enable use with existing devices and hosts, and CATC...

Read More »
Portable Temperature Calibrator can be used in field or lab.
Calibrators

Portable Temperature Calibrator can be used in field or lab.

Accurate Thermal Systems is announcing the release of our new model ThermCal130 calibrator. Our new lightweight calibrator weighing in at 17lbs, the ThermCal130 is perfect for use in the field as well as the lab. This unit also has a small footprint and offers fast heat up and cool down. Unlike many competing lower cost models that only offer a fixed block our units accept inserts for probe size...

Read More »
Digital Panel Meters measure up to 20 samples per second.
Meters

Digital Panel Meters measure up to 20 samples per second.

Equipped with 3-color, 9-segment LED display, PLATINUM™ Series offers universal inputs supporting thermocouples, RTDs, thermistors, and process voltage/current. Display offers wide viewing angle and full scale positive and negative readings. In addition to USB communications and remote latch reset, meters come standard with built-in excitation firmware selectable at 5, 10, 12, and 24 V....

Read More »
Calibrators

Reference Standard enables analysis of PAHs in samples.

Formulated to contain 16 major European Food Safety Authority PAH compounds, EU 15+1 PAH Reference Standard enables analysis of PAHs in food and environmental samples. High concentration (100 μg/mL) blend can be diluted as needed to make economical fortification and calibration mixes. Prepared in tolulene, standard is suitable for both GC and LC methods. Broad solvent miscibility makes it...

Read More »
CMM Machinery

X-Ray Based CMM is designed for metrology.

Along with 225 kV X-ray source with- 2 micron minimum detectability, CXMM 50 features built-in temperature control and vibration-isolated granite table that promote precise and accurate measurements. X-ray test system, suited for use as product development and QC tool, is fitted with flat panel DDA detector and intended for inspection of workpieces up to 11 kg with envelope up to 30 x 30 cm....

Read More »
Vision System measures to 0.1 mm.
CMM Machinery

Vision System measures to 0.1 mm.

Compatible with full range of ST-Robotics’ arms and controller, Vision System can measure to 0.1 mm and send precise coordinates of object to robot. System comprises Matrox GigE 1,920 x 1,448 pixel camera; C-mount lens with zoom, focus, and exposure control; and LED lighting. Hardware and RobWin software are installed on user's- PC, and second serial channel connects to robot controller,...

Read More »
CMM Machinery

X-Ray Based CMM is designed for metrology.

Along with 225 kV X-ray source withÂ- 2 micron minimum detectability, CXMM 50 features built-in temperature control and vibration-isolated granite table that promote precise and accurate measurements. X-ray test system, suited for use as product development and QC tool, is fitted with flat panel DDA detector and intended for inspection of workpieces up to 11 kg with envelope up to 30 x...

Read More »
Vision System measures to 0.1 mm.
CMM Machinery

Vision System measures to 0.1 mm.

Compatible with full range of ST-Robotics’ arms and controller, Vision System can measure to 0.1 mm and send precise coordinates of object to robot. System comprises Matrox GigE 1,920 x 1,448 pixel camera; C-mount lens with zoom, focus, and exposure control; and LED lighting. Hardware and RobWin software are installed on user'sÂ- PC, and second serial channel connects to robot controller,...

Read More »
The Analytical Scientist Innovation Awards (TASIAs) Honor Restek's EZGC(TM) Method Development Tools
Chromatographs

The Analytical Scientist Innovation Awards (TASIAs) Honor Restek's EZGC(TM) Method Development Tools

The Analytical Scientist(www.theanalyticalscientist.com) just published their 2014 Innovation Awards, and Restek's EZGC™ method development tools suite was chosen as a winner! These ground-breaking tools allow any analyst, regardless of experience level, to speed up and simplify their GC method development by quickly and easily modeling chromatograms, getting column recommendations, translating...

Read More »
VectorNav Introduces Surface Mount VN-300 Dual Antenna GPS/INS at AUVSI 2015
Sensors / Detectors / Transducers

VectorNav Introduces Surface Mount VN-300 Dual Antenna GPS/INS at AUVSI 2015

New VN-300 Surface Mount Device expands VectorNav's product offerings to include the industry's smallest, lightest, and lowest cost GPS-compass/INS on the market DALLAS –- VectorNav Technologies introduced today a surface mount version of its market-leading VN-300 Dual Antenna GPS-aided Inertial Navigation System (GPS/INS). The VN-300 surface mount device (SMD) is a miniature MEMS-based...

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics