Silicon Laboratories    Austin, TX 78727
Dec 31, 2009 Designed for touchless human interface sensing, QuickSense(TM) Si1102 enables electronic device to quickly gauge its proximity to user, while Si1120 can detect proximity as well as ambient light in external environment, allowing screen backlighting to be dimmed. Si1120 additionally enables touchless proximity slider for gesturing, allowing users to navigate with gestures only. Providing 50 cm range, both ICs can power down displays or other functions when user is not present.

Pepperl + Fuchs, Inc.    Twinsburg, OH 44087 2245
Dec 30, 2009 Designed to facilitate connection of traditional I/O signals onto bus network, LB/FB Remote I/O Systems support general-purpose or intrinsically safe applications with modules that can be mixed and matched on same backplane. Products facilitate connection to PROFIBUS DP, Modbus, and FOUNDATION fieldbus for all traditional signal types, including discrete, analog, frequency, and temperature. Redundancy for communication interface and power supply promotes reliability.

Maxim Integrated Products    Sunnyvale, CA 94086
Dec 30, 2009 Supplied in Pb-free TQFN package, MAX11046 eight-channel SAR ADC enables Class 0.2 precision for 220 V and measures up to 6 kV mandated by IEC 62053 and EN 50160 for polyphase power-grid monitoring and protection. Architecture provides on-chip, negative supply voltage, and true 16-bit performance is achieved via high-impedance bipolar input using single positive external supply. Input also eliminates precision external buffers on each channel, while bipolar input saves level shifter.

Brookfield Engineering Laboratories, Inc.    Middleboro, MA 02346
Dec 30, 2009 Enabling calibration in glass-free environment, Plastic VisCal Kit includes 600 mL plastic beaker, 1 liter Silicone Viscosity Standard in plastic bottle, and metal lid for anchoring beaker in temperature bath. Reversible lid fits containers of various sizes. Using Brookfield Viscosity Standards with accuracy ±1%, operators can verify calibration of Brookfield Laboratory Viscometer/Rheometer.

Paul N. Gardner Co., Inc.    Pompano Beach, FL 33060 6608
Dec 30, 2009 Optimized for speed and accuracy by leveraging Direct Sampling Procedure (DSP), Bresle Chloride Test Kit includes all necessary equipment for assessing level of soluble salts on blast-cleaned surfaces prior to coating. It complies with ISO 8502-6 and ISO 8502-9 standards and is also suitable for determining contamination of blast-media in use as to prevent dissolved salts in recycled abrasive media or water from re-contaminating surface being cleaned.

Gigahertz-Optik Inc.    Newburyport, MA 01950 4009
Dec 30, 2009 Measuring 43.5 x 25 x 17.5 mm, ISD-1.6-Si-1 and ISD-1.6-Si-FC-1 with FC connector for spectrometer feature 16 mm dia sphere for light sources such as laser diode dyes and optical fibers. Silicon photodiode detectors measure beam power through 3 mm measurement port. They offer spectral range from 400-1,100 nm and typical absolute sensitivity of 200 µA/W at 630 nm (500 mW max power). Detector heads are traceably calibrated and certified to international standards.

OTC-SPX Corp.    Owatonna, MN 55060
Dec 29, 2009 OTC 1000V CAT III Hybrid Multimeter, Model 3990, tests for voltage leaks through insulation found on hybrid and electric vehicles. In addition to insulation resistance, unit measures True RMS and provides diode test. Multimeter features data hold, data logging, display backlight, min/max mode, and sleep mode. Kit includes Heavy Duty Class III test leads with alligator clips, short lead, K Type temperature adapter, and manual.

GE Intelligent Platforms    Charlottesville, VA 22911
Dec 29, 2009 Model RXMC-1553 High-Density XMC module offers 1 or 2 dual-redundant channels, each supported by 1 MB memory. Its multifunction interfaces are configurable to emulate bus controller, up to 31 remote terminals, or bus monitor. Supporting Windows® and VxWorks®, conductively cooled module is designed for use in harsh environments. It includes 45-bit microsecond message time tagging, triggers, error injection/detection, API software, and factory-configurable programmable I/O.

Shenitech    Woburn, MA 01801
Dec 29, 2009 Designed for nonintrusive pipe flow measurement, STUF-300F1B utilizes one pair of clamp-on ultrasonic transducers to measure flow from outside pipe and delivers +1% standard accuracy or +0.5% with on-site calibration. Nonintrusive design eliminates contact with process liquids and requires no maintenance. Accommodating 1-240 in. dia pipe, transit-time flowmeter offers standard features such as 4-20 mA, OCT, relay, batch control, alarm, and RS 485 with MODBUS.

Instek    Chino, CA 91710
Dec 28, 2009 APS-1102 AC/DC power source also offers features for testing and characteristic analysis of power supplies, electronic devices, components, and modules. Functionality allows free programming of outputs for simulation of power source with abnormal variations, and output function includes 2 main modes that can be combined with any of 4 signal sources. Capable of multiple real-time measurement functions, power source has 5.7 in. LCD screen, USB interface, and 1 kVA capacity.

OTC-SPX Corp.    Owatonna, MN 55060
Dec 28, 2009 Featuring 32 mm clamp opening, Model 3908 AMP Clamp/Multimeter provides access to current and voltage as well as other key automotive measurements such as resistance, capacitance, diode, continuity, frequency, and temperature. Meter includes 4,000 count display, automatic negative polarity indication, automatic zero adjustment, over range indication, and auto power off.

OTC-SPX Corp.    Owatonna, MN 55060
Dec 28, 2009 Model 3980 - 750 Series Automotive Multimeter includes functions such as frequency, duty cycle, diode, and continuity tests; automotive specific tests; and true RMS, RPM, dwell, pulse width, and temperature tests. Unit features backlight and automatic power-off function, as well as RS232 port and cable for connectivity. Red/black test leads are included as well as alligator clips, RPM pickup adapter, and temperature probe adapter. It also comes with PC cable and software.

Greyline Instruments, Inc.    Massena, NY 13662
Dec 28, 2009 Mounting to outside of plastic/metal pipes, compact, hand-held flowmeter PDFM 5.0 displays flow rate, and can also totalize and data log in choice of gallons, liters, or any engineering units. Features include 4-20 mA output, large backlit display, reverse flow measurement, menu language selection, USB output and Windows(TM) software, and rechargeable NiMH battery. Unit is suited for use with wastewater, sludge, slurries, chemicals, and abrasives.

E Instruments International LLC    Langhorne, PA 19047
Dec 28, 2009 Suited for use in boiler, burner, engine, turbine, furnace, and other combustion applications, lightweight E6500 offers wireless communications with computer and other Windows devices, and comes with 6 gas sensors; O₂, CO, NO, NO₂, SO₂, and H₂S. It has built-in printer, and internal water trap with automatic condensate removal. Unit provides stack gas and ambient air temperature measurements, as well as draft and differential pressure measurements.

Greyline Instruments, Inc.    Massena, NY 13662
Dec 28, 2009 Designed for measuring clean liquids like water, oils, and most chemicals, Portaflow PT500 Transit Time Flow Meter works with any plastic or metal pipes from 0.51-78 in. OD, and can be used for troubleshooting, spot checks, and balancing flow. It features backlit graphics display, 4-20 mA output, data logger, RS232 and USB outputs, and OS with quick start calibration menu. Operating 16 hr on internal battery, unit can store calibrations for up to 20 different sites.

VanDyke Software Inc.    Albuquerque, NM 87111-2873
Dec 28, 2009 Combining terminal emulator with SSH protocol, SecureCRT® v6.5 suits IT professionals requiring solid security, fine-tuned session management, and reliable remote access. File transfer application, SecureFX® v6.5, supports SFTP, FTP over SSL, SCP, and standard FTP. Enabling remote access and file transfer, both Secure Shell clients optimize productivity and usability via UI features such as Windows® 7 compatibility, support for program previews, and ASCII drag-and-drop feature.

LeCroy Corp.    Chestnut Ridge, NY 10977
Dec 28, 2009 USB probe monitors embedded USB 2.0 and interchip links within multichip PCB assembly. Operating with entire line of LeCroy USB analyzers, probe supports tapping chip-to-chip links using low or full speed inter-chip signaling at all defined IC-USB voltages. Flying lead tap can be connected directly to inter-chip probe points using solder-in resistor connections. Probe can also be used to tap USB 2.0 links at standard 5 V signal levels.

LeCroy Corp.    Chestnut Ridge, NY 10977
Dec 28, 2009 Supporting PCIe® 3.0 specification, Summit(TM) T3-16 captures, decodes, and analyzes PCIe bus traffic at data rates to 8 GT/sec per lane on bus widths up to 16 lanes. Each data view displays PCIe 3.0 transactions in unique ways to discover hard-to-find protocol errors. This enables flaws in power state transitions in LTSSM and improper credit flow exchanges to be found, tracked to their source, and resolved. Additionally, unit offers real-time statistics monitoring and documentation tools.

Thermotron Industries, A Venturedyne, Ltd. Co.    Holland, MI 49423
Dec 24, 2009 Model SE-300-10-10 environmental test chamber features two 10 hp compressors powering cascade refrigeration system and has interior workspace measuring 24 x 26.25 x 28 in. With interior dimensions of 32 x 26.25 x 28 in., SE-400-15-15 unit includes two 15 hp compressors. Both provide temperature change rates up to 77ºF/min and have interior airflow system. Products also feature 8800 Programmer Controller with 12 in. touchscreen interface and Ethernet-compatible, web-enabled front end.

Pepperl + Fuchs, Inc.    Twinsburg, OH 44087 2245
Dec 24, 2009 Equipped with self-diagnostics, RVS58S series is designed for use in safety aligned systems up to SIL3 for IEC 61508, performance level e for IEC 13849, and Category 4 for DIN EN 954-1. They are also suitable as motor feedback systems for safe drives concerning IEC 61800-5-2. While functional safety promotes system integration, thermal stabilization lends to Hi-Res interpolation. Products have sin/cos interface and 1,024 or 2,048 signal periods and deliver 200 kHz max output frequency.