Dwyer Instruments, Inc.    Michigan City, IN 46361
May 14, 2010 Programmable using HART® Communication, Series 3200 Smart Pressure Transmitter is microprocessor-based and features flexible pressure calibration as well as pushbutton configuration. EEPROM stores configuration settings and stores sensor correction coefficients in event of shutdowns or power loss, and transmitter software compensates for thermal effects. FM approved for use in hazardous (classified) locations, product offers 100:1 rangeability to fit any application.

CUI, Inc.    Tualatin, OR 97062
May 14, 2010 Measuring only 1.35 x 1.13 x 0.45 in., AMT203 outputs 12 bits of absolute position information using patented capacitive code generation system and on-board PIC 16F690 MCU that operates at up to 2 MHz. Encoder consumes 10 mA max at 5 Vdc, and is available with 9 mounting patterns and 10 bore size options. Device also provides non-magnetic index pulse and may be configured to output incremental position data after zero position is established to approach throughput of up to 10 MHz.

Dynalab Corp.    Rochester, NY 14623
May 14, 2010 Speeding process of determining melting points, SMP30 can take 3 samples simultaneously within optimized heating block. It has max temperature of 400°C and variable ramp rate from 0.5°C to 10°C in 0.1°C increments. Tubes are illuminated with bright white LEDs, resulting in clear view of samples during melt. Menu system, used to guide operators through melting process, is displayed on backlit alphanumeric LCD. It is possible to record up to 8 events in memory for each of 3 sample tubes.

Mountz, Inc.    San Jose, CA 95112
May 13, 2010 Designed to detect cross-threading, omissions, unfinished rundowns, and cycle completes, Scout Screw Counter ensures assembly process is done correctly. Unit operates jointly with Mountz electric screwdrivers and STC30 or STC40 power supply. With 4 ports on side, maximum of 4 screwdrivers can share one program with unit. Programmed via PC software or manually through keypad, Scout alerts operator with buzzer and red light if fastening error is detected.

Columbia Research Labs., Inc.    Woodlyn, PA 19094
May 13, 2010 Designed for differential tilt measuring, Model DI-10-DFD-IR allows matching slope of 2 remotely located surfaces. Readout can be set to indicate absolute tilt of either sensor or differential angle between them. Display provides 4½ digit, 7 segment, 0.4 in. high readout indicating +10.000° full scale. Measuring 3.64 x 2.10 x 1.69 in., sensors supplied with system feature aluminum case, operate from -20 to +75°C, and their shock survival is 50 G RMS.

Paul N. Gardner Co., Inc.    Pompano Beach, FL 33060 6608
May 13, 2010 Offering 2 user-selectable measurement ranges, Model IG-410 measures low gloss samples using 0-100 range and high gloss samples, such as polished metal and mirror finishes, using 0-1,000 range. Portable, battery-operated instrument is supplied with 2 calibration plates, which allow one-touch calibration for reproducible results.

CompuDAS    Shelton, WA 98584-8759
May 13, 2010 With 2 analog output channels, 10 digital I/O connections, and up to 8 analog I/O, CPC-8 data acquisition and critical process control provides communication utilizing Windows-based software and Ethernet connectivity. CompuDAS CDClave software allows for oven and autoclave control by specific customer-defined recipes of up to 20 segments. Software also offers optional control of lagging or leading part temperatures. With secure PC connection, users can monitor processes remotely.

Control Co.    Houston, TX 77258 8307
May 13, 2010 Available in rugged ABS plastic case measuring 1½ in. dia x 8 in., Traceable® hygrometer/thermometer/barometer/dew point pen has user selectable dual display that shows humidity/temperature, humidity/dew point, barometer/temperature, or barometer/humidity. Features include electronic capacitance polymer film sensor, HOLD button that freezes reading on display, and 3/8 in. high LCD digits. Product can recall minimum/maximum readings on press of button.

Phidgets, Inc.    Calgary, AB T2M3R7  Canada
May 13, 2010 Targeted for commercial customers, Model 1132 allows users to integrate 4-20 mA industrial sensors into their projects. Any 4-20mA sensor that does not require more than 15 V and whose capacitive load is equal to or less than 1.5 µF can be used. Output impedance is 1 KW and current consumption is 130 mA in 22 mA loop, 18.4 mA in 4 mA loop, and 1.84 mA at no load. Features include power supply range of 4.75-5.25 Vdc and max output error of ±1.2%.

PKP Process Instruments, Inc.,    Hudson, MA 01748
May 13, 2010 Available with G or NPT threads for pipes and as wafer for mounting between 2 DIN or ANSI flanges on DN80 (3 in.) to DN200 (8 in.) pipe sizes, model DK10 Flow Meter operates at up to 2,900 psi of pressure and in temperatures up to 625°C. Spring-loaded flap mounted in hemispherical chamber gets deflected by flow in line, and deflection is directly proportional to flow rate. Unit is available with 1 or 2 alarm level outputs as well as 4-20 mA output proportional to flow.

Mid-West Instrument    Sterling Heights, MI 48314
May 13, 2010 Available in single and double switch options, Model 116 indicating switches feature Dry Bellows design with internal bi-directional relief valves with no liquid fill required to protect unit from over-range. DP ranges from 0-80 in. H₂O to 0-600 in. H₂O. Rated at 4 A at 30 Vdc, 5 A at 120 Vac SPDT, units come with highly visible Flag option to indicate "reorder" or "alarm" fluid conditions, and custom dial faces (logo, dual or tri scale).

GAO FiberOptics Inc.    Toronto   Canada
May 13, 2010 Combining digital optical phone and stable light source, model 08311 aids installation, optical testing, maintenance, and fiber attenuation value testing in data networks, CATV, and telecom networks. It deals with 1,310 or 1,550 nm wavelength signals and carries out full-duplex communication. With output power rated from -5 to -7 dBm, product features 7-color, backlit LCD screen for clear display of operations and offers 270 Hz, 1 kHz, 2 kHz, and CW modulation frequencies.

Veeco Instruments Inc. Corporate Headquarters    Woodbury, NY 11797
May 12, 2010 Able to be used on any atomic force microscope (AFM), Sharp Nitride Lever (SNL) Probes feature tip that combines low spring constant softness of silicon nitride cantilever with sharpness of silicon tip. This results in radius of curvature as low as 2 nm. High resolution imaging in air and fluid is possible using Contact Mode and TappingMode(TM) operation, and there are 2 available configurations: NP/DNP levers and MLCT/MSCT levers. All products are built for extended lifetime.

Pentek Inc.    Upper Saddle River, NJ 07458
May 12, 2010 With up to 4 TB of removable RAID storage and dual 200 MHz, 16-bit sampling channels in 4U rack-mount unit, Model RTS 2703 forms complete Windows XP workstation that can stand alone or connect to gigabit Ethernet network for remote access and control. Both sampling channels deliver nearly 90 dB of spurious free dynamic range and use same start, stop, triggering, and clock timing to ensure that data sets are synchronized. NTFS recording format simplifies file access and eliminates conversions.

Advanced Instruments, Inc.    Norwood, MA 02062
May 12, 2010 Approved by Lab Committee of the National Conference on Interstate Milk Shipments (NCIMS), SomaScope(TM) Smart incorporates flow cytometer and LED technology. LED illuminates stained cells in sample, and dual photomultiplier tubes detect cells. Resultingly, there are no warm-up wait times and no light source hot spots. Along with 30 sec analysis time, functional efficiency is promoted via wizard-driven software. Calibration exceeds IDF/ISO/FDA/NCIMS standards.

Dicon Fiberoptics Inc.    Richmond, CA 94804
May 12, 2010 Fiber optic attenuator module can automate optical switches and fiber optic attenuators with complete plug-and-play modularity and control options. Product can be used with single mode fiber and can support up to 8 optical attenuators in single 1-wide GP750 module. Max attenuation level can be specified up to 40 dB of attenuation, and can also be specified for narrowband or broadband use in 1,290-1,330 nm, 1,530-1,570 nm and/or 1,570-1,610nm wavelength ranges.

DALSA    Waterloo, ON N2V2E9  Canada
May 12, 2010 Housed in rugged, easy-to-mount enclosure, monochrome model BOA M1280 delivers high resolution of 1,280 x 960 and operates at up to 24 frames/sec. Camera incorporates multiple processing engines, providing algorithm optimization via DSP, application management via CPU, and sensor management via FPGA. Eliminating version control problems, camera comes with truly embedded application software, which is set-up through standard web browser.

Phidgets, Inc.    Calgary, AB T2M3R7  Canada
May 12, 2010 Able to obtain temperature in °C for K, J, E, and T-Type thermocouples at rate of 25 S/sec, 1048 - PhidgetTemperatureSensor delivers thermocouple resolution of 0.1°C (K-type at 25°C) and 4 µV, with accuracy of 2°C (K-type). Sensor connects directly to computer's USB port, and features current consumption of 25 mA and USB device voltage of 4.75-5.25 Vdc. Users can program device using API supported under Windows 2000/XP/Vista/CE, as well as Mac OS X and Linux.

Fredericks Company, The    Huntingdon Valley, PA 19006-6232
May 12, 2010 High Accuracy Electrolytic Tilt Sensor (Part #0737-1203-99) utilizes thin film technology to provide inclination measurement with arc-sec repeatability. Sensor offers angle range of ±30 arc-min, less than 0.05 arc-sec resolution and less than 0.5 arc-sec repeatability at null. Featuring hermetic seal design for operation in extreme conditions. applications include geophysical monitoring, surveying equipment, aircraft avionics, machine tool leveling, among others.

Meggitt Sensing Systems (Endevco Corp.)    San Juan Capistrano, CA 92675
May 12, 2010 Available in 1/8, ¼, and ½ in. dia, Endevco® prepolarized condenser measurement microphones are offered in free-field, pressure, low-cost array, and random incidence types. All microphones are constructed with stainless steel protective grid case and housing, as well as special stainless steel alloy diaphragm, to suit variety of application environments. Models are offered as stand-alone units, or in microphone and low-noise preamplifier combination with iTEDS on-board memory storage.