Test & Measuring Instruments

Test & Measuring Instruments

Detecting DC Motor Failure Using a Data Logger

September 27, 2016

DC motor failure is disastrous for factories and plant processes in every industry. To help prevent costly process delays, you can use a data logger to measure Temperature, Voltage/Current and other parameters. At CAS DataLoggers we provide the versatile and rugged dataTaker data loggers for these applications. Call our Application Specialists at 800-956-4437 for more info. DataTaker Features:... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Digital Force Gauges help manufacturers optimize packaging.

September 27, 2016

With ±0.1% accuracy, PCE-DFG Series can measure both tensile and compressive forces. Models offer ranges/resolutions of 0–5 N/0.0005 N, 0–10 N/0.001 N, 0–20 N /0.005 N, and 0–500 N/0.05 N. Each gauge has sampling rate of 2,000 Hz, storage rate of 1 Hz, and 3 modes of measurement: peak, auto peak, and track. Equipped with 160 x 128 dot matrix LCD, gauges offer 6 units of... Read More

Controls & Controllers, Test & Measuring Instruments

Mass Flow Meters and Controllers suit high pressure systems.

September 26, 2016

Operating on systems up to 320 psia, MQ Series Flow Meters and MCQ Series Mass Flow Controllers measure mass flow rate, volumetric flow rates, and pressures. Units provide 10 ms sensor response speeds and sub-100 ms control response times. Preloaded with up to 98 on-board gas calibrations, instruments feature multivariate interface displays, as well as serial and analog connections. Each comes... Read More

Computer Hardware & Peripherals, Electronic Components & Devices, Test & Measuring Instruments

PC-Based Test Scope supports signature analysis.

September 26, 2016

Based on 2-channel 200 kHz oscilloscope sampling at 2 MSa/s, Syscomp SIG-101 Signature Analyzer includes 12-bit arbitrary waveform generator and 8-bit digital I/O port. Waveform generator can be used to create swept, stationary, or noise test signals, or provide PWM outputs. Combined, oscilloscope and waveform generator provide Vector Network Analysis, yielding Bode plots that graph frequency... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Precision Pressure Transmitter provides CANbus outputs.

September 26, 2016

Supplied in welded, hermetically sealed, stainless steel housing measuring less than 1 in. diameter, Model EPT1005 is available with pressure ranges from 1–20,000 psi. Electronically compensated unit is designed for use in rugged environments with temperatures from -40 to +250°F. Utilizing piezoresistive silicon sensor technology, transmitter provides hysteresis and repeatability of... Read More

Computer Hardware & Peripherals, Sensors Monitors & Transducers, Test & Measuring Instruments

Label Inspection System integrates with thermal printers.

September 23, 2016

Available as integrated solution within Printronix® T8304 and T8308 thermal label printers, LVS-7510 Print Quality Inspection System provides 5.4 in. or 8.5 in. read head for scanning label widths from 4.1–8.5 in., as well as stop motion unit, print control unit, and light tower for triggering alerts or printer actions when errors are detected. Machine vision tools—including barcode... Read More

Electrical Equipment & Systems, Electronic Components & Devices, Test & Measuring Instruments

U.S. Army Awards Nuwaves Engineering 2016 SBIR Phase I Contract for Development of Tactical Aircraft Transponder Simulation System

September 23, 2016

NuWaves Partners with ViaSat to Accurately Simulate the RF Signal Environment MIDDLETOWN, Ohio – NuWaves Engineering, a veteran-owned small business providing advanced radio frequency (RF) and microwave solutions, today announced a Small Business Innovation Research (SBIR) Phase I contract with the U.S. Army’s Redstone Test Center (RTC) to research and develop a Mode 5 Identification Friend... Read More

Test & Measuring Instruments

RF Upconverter supports 2 MHz to 3 GHz systems.

September 22, 2016

Accepting user-programmable IF input signal from 2–70 MHz, Model RF2-3000UCV1 delivers RF output at any user-programmable frequency between 2 MHz and 3 GHz, with tuning resolution of 5 kHz. Multi-octave device has 50 dB of attenuation control with incremental steps of 0.5 dB. Housed in 1.0 x 2.5 x 3.5 in. ruggedized aluminum enclosure, upconverter operates at 6 Vdc and features SMA RF... Read More

Test & Measuring Instruments

U.S. Navy has selected the TEGAM Model R1L-D1 for a Special Test Requirement of the Nuclear Navy

September 22, 2016

High Accuracy Micro Ohmmeter and RTD Meter has the Longest Rechargeable Battery Life with a rugged MIL-PRF-28800F Class 3 rating Geneva, OH – TEGAM, Inc., a leading supplier of test and measurement equipment, is proud to announce that the U.S. Navy has selected the TEGAM Model R1L-D1 Portable Micro-Ohm and RTD Measurement Bridge to fulfill a special test requirement of the nuclear Navy. ... Read More

Cleaning Products & Equipment, Material Handling & Storage, Test & Measuring Instruments

VAC-U-MAX Exhibits Pneumatic Conveying Systems for Batch & Continuous Processing, and Dust Collection & Cleaning Solutions for Powders and Combustible Dusts at IBIE 2016, October 8-11, Las Vegas Convention Center, Las Vegas, NV, Booth 3314

September 22, 2016

BELLEVILLE, NJ USA – VAC-U-MAX announces exhibition at IBIE 2016, October 8-11, Las Vegas, Nevada, Booth 3314, exhibiting the latest advances in food processing automation solutions for bulk-ingredient transfer. VAC-U-MAX food-ingredient handling systems convey over 10,000 various powders, flakes, flavorings, extracts, additives, granular materials, nuts, extruded foods, and other dry food... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Corrosion Meter provides rebar assessment.

September 22, 2016

Based on half-cell method, Profometer Corrosion provides optimized workflow for rod and wheel measurements. Wheel electrodes allow fast on-site testing, while dual-core processor enables data acquisition and real-time control over measurement procedure. Packaged in rugged housing for harsh environments, product has illustrative touchscreen that supports 2D grid views, assisted workflow, and... Read More

Automatic ID, Test & Measuring Instruments

Power Analyzer measures RF power from 9 kHz to 70 GHz.

September 22, 2016

Leveraging Shockline technology, frequency-selectable Power Master MA24507A addresses test requirements for millimeter wave applications, including test of 802.11ad, Wireless HD, and E-band products, at every stage of product lifecycle. Ultraportable size enables placement directly at signal source, including on-wafer measurements. With spans from 1 kHz to full span over entire frequency range,... Read More

Test & Measuring Instruments

ARM Cortex-R52 CPU Kit fosters accelerated adoption and use.

September 22, 2016

Cadence® RAK (Rapid Adoption Kit) is optimized for ARM® Cortex®-R52 CPU, which targets embedded designs for automotive, medical, and industrial safety applications. Solution, which consists of complete digital implementation and signoff flow, works with ARM Artisan® physical IP to help designers meet challenging PPA (power, performance, and area) goals. Full-flow reference... Read More

Mechanical Components and Assemblies, Test & Measuring Instruments

Synopsys Accelerates Development of Safety-Critical Products with Design Solutions for ARM Cortex-R52

September 22, 2016

Synopsys Tools Enable Design and Safety Certification of Automotive, Industrial and Health Care SoCs Based on New ARMv8-R Architecture CPU MOUNTAIN VIEW, Calif. - Highlights:

  • Galaxy Design Platform tools, including IC Compiler II place and route, Design Compiler Graphical synthesis, and ISO 26262-certified TetraMAX II ATPG enable optimal power, performance and area for ARM Cortex-R52... Read More

Test & Measuring Instruments

High-Speed Recording of Frequency Trigger Points

September 22, 2016

ADwin Systems Log Data at Speeds of 25 Nanoseconds At CAS DataLoggers we occasionally have customers in the power generation industry whose application involves a quickly-fluctuating waveform. These technicians need to accurately determine the frequency of a given waveform at each of its cycles. This can occur when manufacturers and servicers need to ensure the stability and reliability of their... Read More

Communication Systems & Equipment, Test & Measuring Instruments

Tektronix Sentry ABR Receives High Marks in the Diamond Technology Reviews

September 22, 2016

Sentry ABR Platform Delivers End-to-End ABR QoS and QoE Monitoring, Including Decryption and Decode Functionality BEAVERTON, Ore. - Tektronix, Inc., an industry-leading innovator of video test and monitoring solutions, today announced that the Sentry ABR video quality monitoring platform has received an impressive 4.0 Diamond rating in the Broadband Technology Report's 2016 Diamond Technology... Read More

Services, Test & Measuring Instruments

Testing Services validate integrity of materials.

September 22, 2016

With Material Validation Testing Center, company can verify identity and integrity of precision bar products, mitigating material risk. Equipment can test for internal and surface defects as well as alloy verification. This is important for industries where metal identification is critical to application such as aerospace and medical. Company can provide Ultrasonic Testing, Eddy Current Testing,... Read More

Test & Measuring Instruments

Teledyne LeCroy Expands Solutions for Datacenter, Metro, and Long-Haul Optical Communications

September 21, 2016

25 GHz O/E Converter and 25 GHz Coherent Optical Receiver combine with LabMaster 10Zi-A Series Oscilloscopes for Cost-Effective, High-Performance Analysis of both Non-Coherent and Coherent Optical Links CHESTNUT RIDGE, N.Y. - Teledyne LeCroy, supplier of real-time oscilloscopes up to 100GHz and other cutting edge instrumentation for the optical test and measurement space, further extends its... Read More

Communication Systems & Equipment, Electronic Components & Devices, Optics & Photonics, Test & Measuring Instruments

EXFO Launches Agile NEMs Infrastructure Solutions for end-to-end Manufacturing Coverage

September 21, 2016

New power meter, variable attenuator and switches combining next-generation chassis and industry's unique, web-based multi-user interface ideal for network equipment manufacturers QUEBEC CITY - EXFO Inc. (NASDAQ: EXFO) (TSX: EXF) announced today its latest agile solutions for network equipment manufacturers (NEMs), which include new power meter, variable attenuator and switches, all... Read More