Test & Measuring Instruments

HVAC, Test & Measuring Instruments

Temperature Sensors feature lead-wire connections.

Nov 08, 2001

Bolt-On RTD Temperature Sensors are available in 4 models with through-holes and 2 models with threaded bolt designs. Platinum and nickel RTD elements are available to match existing instruments, with temperature ranges up to 550° C. Models with 100 ohm at 0° C platinum (0.00375 TCR) elements and 100 ohm at 0° C nickel elements are also available. Two-wire construction allows use with 4... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Angle Encoders have integral bearing and stator coupling.

Nov 08, 2001

RON/RCN angle encoders feature recognizable outlet channels on flange and rear side to ensure that fluids cannot collect on encoder or seep inside housing. Signal processing electronics provide resolution up to 134 million position values (27 bits) per revolution. Encoders feature accuracy of better than ± 5 in. and line count above 18,000. Applications include rotary tables and swivel heads... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Encoder is available in thru-bore and hollow shaft.

Nov 08, 2001

Model 260 General Purpose Accu-Coder(TM) combines ASIC encoder-on-a-chip design with thru-bore encoder package. It can be specified with three 120 electrical degree phase tracks to provide 4, 6 or 8-pole commutation feedback for brushless servo motor applications. Extended temperature ranges to 120° C allow servo motors to operate at higher power outputs and duty cycles, limiting concern for... Read More

Communication Systems & Equipment, Test & Measuring Instruments

Multi-Function Power Meter can retain 63,000 measurements.

Nov 08, 2001

A2000 Electric Power Meter, available with PROFIBUS DP, measures all variables in 3-phase power systems, such as voltage, current, frequency, active/reactive/apparent power as well as power factor and active/reactive energy. Up to 4 parameters are displayed on its 0.55 in. red LED, and up to 4 analog current, as well as 2 pulse outputs, are freely selectable. Up to 10 variables are monitored with... Read More

Test & Measuring Instruments

Finishing Process tests 12,000 power devices per hour.

Nov 08, 2001

Model M232 test/handling system for power devices completes device finishing processes for D-Paks and TOs. It has 32-position turret that accommodates up to 8 test stations for parallel testing. Each device undergoes electrical test, is laser-marked and inspected for mold and mark quality, and finally has 3D-lead inspection. Rejects are loaded into tubes. Part loading is via tube loader or direct... Read More

Optics & Photonics, Test & Measuring Instruments

Microscopes provide critical inspection.

Nov 08, 2001

Shop Microscopes feature achromatic objective lenses for color corrected distortion-free viewing of objects. Rack and pinion focusing has 2.5 in. of vertical travel enabling different size and shaped objects to be observed with sharp focus. Built in light source operates from 2 AA batteries and provides illumination for clear viewing in dimly lit areas. Microscopes are 7.5 in. tall and available... Read More

Test & Measuring Instruments

Linear Height Gage is battery powered and portable.

Nov 08, 2001

Series 518 Linear Height Lite makes high accuracy, vertical measurements with selectable resolution settings of 0.00005, 0.0001 or 0.005 in. Readings are presented on large LCD that indicates measurement parameters in use. Absolute type linear encoder allows origin point and other settings to be retained even when power is switched off so there is no need to reset with each use. Two versions are... Read More

Test & Measuring Instruments

Measuring Gage includes 3-D measurement functions.

Nov 08, 2001

QM-Measure 3-D measuring gage features open-sided structure for workpiece loading/unloading. Its cantilever design allows operators to reach, fixture, and move parts without obstruction. Holding capacity of the machine is 66 lbs, and its design provides accuracies of 3.0 + 41/1000 µm. QM-Measure comes with QM-Data, a machine-mounted data processing unit, and is also available with PC, monitor,... Read More

Test & Measuring Instruments

External A/D Converter supports Windows OS.

Nov 08, 2001

ADC1 000-USB External A/D converter for spectrographic analog-to-digital conversion allows users to interface to PCs via USB port or to devices supporting RS-232 via serial port. It provides 1 MHz sampling frequency that enables integration periods as short as 3 msec. Its USB connection allows full scans of 2048 wavelengths to be transferred into memory every 13 msec. Features include channel... Read More

Test & Measuring Instruments

Calibrator for pressure, temperature and electrical.

Nov 08, 2001

Portable MC3 Series is available with pressure in three ranges up to 2,400 psi and optional barometric reference. Electrical section offers V, mA, Hz measurement, pulse counting, mA generation, switch testing and 24 Vdc loop supply. Temperature section has t/c, RTD, Ohm and mV measurement and generation, and V, mA, Hz and pulse generation. Calibrator is available in three configurations with... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Thickness Gage ultrasonically measures multilayer materials.

Nov 08, 2001

Model 25MULTI PLUS ultrasonic gage can calculate and simultaneously display thickness measurements of various layers in multilayered parts. Using stored setups for each layer (such as sound velocity), gage will display up to 4 individual layers and total thickness of selected layers. Thickness range is 0.004 in. to 20 in. with resolution up to 0.0001 in. Gage works on plastic, metal, casting,... Read More

Test & Measuring Instruments

Loop Calibrator can be operated with one hand.

Nov 08, 2001

Portable Model 707 can source, measure and simulate loop current with 0.015% accuracy and 1 µA resolution. A 24 V loop supply enables user to power and read transmitter at the same time. Selectable slow ramp, fast ramp and step functions provide user with test signals needed for valve slewing and loop functional tests, allowing single technician to troubleshoot entire loop. Compact and easy to... Read More

Electrical Equipment & Systems, Sensors Monitors & Transducers, Test & Measuring Instruments

UV Lamp delivers light to hard-to-reach places.

Nov 08, 2001

Spectroline® AP-800 UltraWand(TM) 8-watt UV lamp is 1 in. in diameter and 30 in. long. It plugs into ac outlet or generator with 12 ft cord. Lamp delivers steady-state UV irradiance of 4,800 pWM/cm2 at 1 in., so inspectors can see cracks and defects. Applications include inspecting inside of pipelines for defective welds or hydrocarbon contamination and conducting internal wet... Read More

Test & Measuring Instruments

Elemental Analyzer has single furnace for faster runs.

Nov 08, 2001

EA3000 performs combustion and reaction in a single furnace configuration, making runs faster and easier. It has automatic, pressurized oxygen injection to ensure complete combustion and tighter tolerances, and software for instrument control and data analysis. Read More

Test & Measuring Instruments

Ground Bond Tester displays data on graphic LCD.

Nov 06, 2001

HYAMP III model 3130 performs 4 common safety tests: ac Hipot, dc Hipot, insulation resistance and ground bond. Graphic LCD shows critical information so operators can see test data and Pass/Fail conditions. Unit provides up to 30 A of current continuous duty, has built-in test and dwell timer function, and built-in verification system. PLC control is provided via 9-pin D type connector. Read More

Test & Measuring Instruments

Digital Weight Indicator is for new or existing systems.

Nov 06, 2001

Model 4215 indicator can connect to PC and graphical user interface. Front panel has 999,999 display, 6 smart pushbuttons, 2 buttons for displayed item and displayed units selection, tare, peak and hold reset, alternate display view, and print. All menu buttons have alternate functions for setup menus. Programmed operations include peak hold and tracking, math, function channels, and limits.... Read More

Test & Measuring Instruments

Calibrator outputs preset number of pulses.

Nov 06, 2001

Model CLF-11 can be connected to loop powered transmitter inputs. Signal outputs and measurement inputs are fully electrically isolated from each other to read output and input simultaneously. Square wave pulses can be generated with frequencies from 0.01 Hz to 10 kHz. Pulse height is adjustable between 100 mV and 24 Volts. Output can drive 34 mA to simulate signals from photo electrics, electro... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Rotary Encoder is designed for large shafts.

Nov 06, 2001

Designed for shafts with axes requiring accuracies to approximately 10 angular seconds, ERM 280 modular rotary encoder with magnetic scanning, features 20mm high scanning head. Magneto-resistive scanning permits shaft speeds up to 24,000 rpm, and is available for shaft diameters up to 295 mm (11.6 in.). Encoder features protection class IP 66. ERM 280 is mainly used on C axis of lathes, quill... Read More

Test & Measuring Instruments

Cable Tester has pre-test and length measurement modes.

Nov 06, 2001

LanRover Pro Cat5 Cable Tester tests for shorts, opens, miswires, reversals, and split pair errors. Its 2-line by 16-character alphanumeric LCD with icons and 4 control buttons displays results in wire map form, with remote ID and pass/fail indication. Eight remotes are included for mapping while testing. Cable parameters can be adjusted by NVP value or by known length of cable. Tone generator is... Read More

Test & Measuring Instruments

Vision Inspection System can download inspection files.

Nov 06, 2001

Vision inspection system consists of PresencePLUS2(TM) vision sensor, CLO1 Operator Interface Terminal, and Edict-97 software. Edict-97 software includes drivers for PresencePLUS2 sensors, and PresencePLUS2 Windows software interfaces directly to CLO1 HMI. Users set inspections to be run, and save inspection parameters on Windows PCs. Saved inspections (.inp files) are transferred from PC to CLO1... Read More