Test & Measuring Instruments

Test & Measuring Instruments

Surge Generator produces test surges to ANS/IEEE C62.41.

Dec 11, 2001

UCS500M/6A can be used for testing EFT, surge, voltage dips and drops, making it suitable for manufactures of surge suppressors. It has CRO trigger output for synchronizing oscilloscope to observe surge waveform. Read More

Test & Measuring Instruments

Pressure Transmitter features 3-valve manifold.

Dec 11, 2001

Series 645 Wet/Wet Differential Pressure Transmitter is designed for use with compatible gases and liquids. Three-valve manifold assembly elminates fluctuations in readings by allowing user to purge system. Unit features NEMA 4X housing and 2 bleed ports to permit total removal of air in line and pressure cavities. It offers accuracy of ±0.25% of full scale, response time of 30 to 50 msec, and... Read More

HVAC, Sensors Monitors & Transducers, Test & Measuring Instruments

Temperature Assemblies provide surface measurements.

Dec 11, 2001

WORM Flexible Sensor coupled with PC-Programmable or Smart HART® Temperature Transmitters mounts directly to tanks, pipes, motors, compressors, or reactors when surface temperature measurement is needed. Spring-loaded, flexible sensor trims-to-length for easy installation. Stainless steel mounting accessories allow assemblies to endure harsh field environments. Read More

Test & Measuring Instruments

Data Logger measures and records temperature.

Dec 11, 2001

Model MTL10 Mini Temperature Data Logger stores up to 2048 temperature readings and can be set to continuously measure or stop recording when memory becomes full. Recordings can be programmed to begin immediately, delayed up to 6 weeks, or initiated by push button. Unit measures up to 12 long-term high and low alarms. LEDs allow visual indication or alarm condition. Unit includes RS232 serial... Read More

Test & Measuring Instruments

Real Time Locator provides mobile tracking and monitoring.

Dec 11, 2001

Mobile Spider(TM) Handheld Reader offers real-time visibility of asset location, inventories, and status. It also allows users to combine radio frequency-based identification with other ID technologies including barcode in unified monitoring environments. System can be scaled from small stand-alone applications to integrated corporate solution spanning multiple locations and disciplines. Read More

Test & Measuring Instruments

Particle-Size Analyzer reduces costs, increases capacity.

Dec 10, 2001

Handling up to seven samples simulataneously, Gradex Model 1000 automates sieve analysis of dry granular material, eliminating need for operator to weigh, calculate, and record of data. Analyzer uses same rotary shaking/tapping motion as manual shaker. It accommodates six full-height or nine half-height test sieves and provides same results as manual process. Read More

Test & Measuring Instruments

Carrier Cards connect I/O modules to CompactPCI computer.

Dec 07, 2001

ACPC8630 and ACPC8635 nonintelligent slave boards interface IndustryPack mezzanine I/O modules to computer. User can mix and match analog, digital, serial, or other I/O modules on 3U carrier cards to produces customizable I/O boards with high channel density, thus saving card cage slots. Carriers are plug-and-play compatible, support 2 interrupts per module, and provide individually filtered and... Read More

Test & Measuring Instruments

Spectral Reflectometer works in a vacuum.

Dec 05, 2001

Spectral Reflectometer measures absorbance, transmittance and reflectance and performs spectral analysis to better than ±0.1% precision with wavelength resolution variable from 0.01 to 8 nm. Stainless steel reflectometer accepts samples up to 350 mm in dia, and samples may be measured from 5 to 180 deg with corresponding detector angles from 10 to 180 deg. Measurements may be performed under... Read More

Test & Measuring Instruments, Transportation Industry Products

Modular Test System includes library of test standards.

Dec 05, 2001

NSG 5200 test system meets electromagnetic compliance (EMC) immunity test standards for supply voltage variations (SW), conducted sine waves (CSW), and power magnetics (PM). These tests are applied to radios, antenna drives, and other electronic systems including those with 42 V supplies. Modular in design, NSG 5200 can function as stand-alone unit, or it can be combined with NSG 5000... Read More

Test & Measuring Instruments

Coordinate Measuring Machine is available with probing options.

Dec 05, 2001

Strato CMM features digital servo technology that delivers 16.93 in./sec traverse speed and 0.17G acceleration. Four models are available with measuring ranges from 28x28x24 in. to 36x64x24 in. Quick Vision Probe provides non-contact measurement and offers magnifications of 1X, 3X, 5X and 10X. Repeatability is ±.00004 in. Both touch and vision modes may be integrated into single CNC program,... Read More

Test & Measuring Instruments

RF Test Sockets keep the pressure on.

Dec 05, 2001

Spring-loaded lids on radio frequency (RF) test sockets provide consistent lead pressure. Precise pressure requirements can be met with mix-and-match springs from 1/2 to 25 lbs. Each socket comes with floating leadbacker built into every lid, and lids can be used throughout RF/microwave, automated handling and burn-in/life testing applications. Each socket has Microstrip Contacts, which can be... Read More

Test & Measuring Instruments

PWM Converters are for mobile equipment and power generation.

Dec 04, 2001

PWM Converters provide compact solution for converting pulse width modulated (PWM) signal into analog current or voltage outputs for mobile equipment, industrial automation and power generation applications. Models are available to convert current inputs into PWM outputs. Converters operate from 24 Vdc and other supply voltages, have diagnostic LEDs, are confromally coated for rugged environments... Read More

Test & Measuring Instruments

Mini-Rack accepts multiple card types.

Dec 03, 2001

Model 4998 Mini-OASIS Rack offers multichannel structural testing, and is RS232 interlinkable. It is designed to provide power and connectivity for up to 4 Model 428, 433, 436, and 482 OASIS Amplifier Cards. Rear panel provides AC input power, RS-232 computer control, external calibration input connector, and 25-pin D output connector. Up to 4 mini-racks are interlinkable, for 16 maximum card... Read More

Test & Measuring Instruments

Particle Counter/Monitor measures filter performance.

Dec 03, 2001

Laser based C10/77 sensor system counts and displays particles that are 2, 3, 5, 7, 10, 15, 20 and 200 microns in size. LED on front of counter allows operators to view current counts at any size, and to display differential counts for adjacent size channels. Applications include providing highly sensitive filter effluent measurement to detect spikes in particle levels that indicate filter... Read More

Test & Measuring Instruments

CO2 Analyzer mounts on wall in NEMA enclosure.

Dec 03, 2001

CEA 266 infrared C02 gas analyzer comes with water and dust tight NEMA 4X enclosure, digital display readout, 0-5 Vdc and 4-20 mA outputs, self-draining water trap and dust filter, and 2 user adjustable alarms and contact relays. It is available in ranges of 0-2000 ppm, 0-5000 ppm, 0-1%, 0-2%, 0-5%, 0-10%, or 0-20%. Sample gas is continuously drawn into unit through built-in air pump.... Read More

Test & Measuring Instruments

Frequency Converter provides variable ac power output.

Dec 03, 2001

MS Series provides AC power from 62.5 to 625 kVA over variable frequency range of 47-500 Hz, making it suitable for testing many different applications. Test applications can be controlled through GPIB or RS-232 interface with optional programmable controller. An uninterruptible power source configuration (UMS) is optional. Read More

Test & Measuring Instruments

Linear Gauge Sensor measures many dimensions.

Dec 03, 2001

Compact, lightweight GS-1630 digital sensor measures dimensions, thickness, curvature, eccentricity, displacement, height, depth, flatness, variation, runout, roundness, distortion, deflection and position. It uses linear glass to make measurements that are accurate to 0.00004 in. throughout its 30 mm range. Sensor has IP64 waterproof seal and dust bellow for harsh environments. It comes with 6... Read More

Test & Measuring Instruments

Analyzer monitors concentrations of hydrocarbon gas.

Dec 03, 2001

Process-control gas analyzer, carrying full FM and CSA approvals, is designed to monitor methane, propane, butane, ethanol, or any of 70 hydrocarbon gases. It taps into gas-flow manifold or pipe for continuing in-stream and on-stream sampling. Readout can be fed to upstream control valves for automatic correction of process parameters. Any change in gas concentration is detected immediately by IR... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Calibration Instrument evaluates pressure measurements.

Dec 03, 2001

Modular CPG8000 comes with choice of four high-precision pressure sensors that cover range of 4 to 40,000 psi and have accuracy of 0.010% FS. System is available as desktop or 19-in. plug-in unit. It has large color graphics display and menu-driven operation in several languages. It can be used in calibration laboratories, measuring and control workshops, national institutes, and research and... Read More

Test & Measuring Instruments

UV Exposure Meter displays dosage and uniformity.

Dec 03, 2001

Compact, self-contained IL393UV Light Bug radiometer measures total dosage and peak irradiance of UV illumination occurring in real-time inside equipment. LCD provides immediate graphic representation of light distribution or illumination uniformity, and it holds two sets of measurements for making comparisons in real-time. It withstands intense UV irradiance and temperatures found inside curing... Read More