Test & Measuring Instruments

Test & Measuring Instruments

Portable Meter measures insulation resistance.

January 2, 2002

Handheld, battery operated IR800 checks insulation resistance of wiring, communication cables, motors, appliances, and electronic products and controls. It measures resistance up to 2000 Mohms at ac and dc voltages of 250, 500 and 1,000V. Zero offset adjustment provides automatic removal of lead resistance. Unit has rotary switch for selection of test type, large test button to initiate... Read More

Test & Measuring Instruments

Force and Weight Calibrator is pocket-sized.

December 27, 2001

Model 125 supplies mV/V level signals for testing, calibrating, and troubleshooting load cell/scale indicators in any environment. Concise output references for 0, 1, 2, or 3 mV/V are achieved by using metal film resistor network, discrete wire wound resistors, and 2-pole 4-position rotary switch. 350 ohm input and output impedance matches typical strain gage devices. 4 permanent binding posts... Read More

Test & Measuring Instruments

Position Monitor is suitable for hydro applications.

December 27, 2001

Model 1250B, designed for gate and valve monitoring, can accept inputs from rotary synchro transmitter devices. It is configured to give proportional gate/valve position signals that can be interpreted as position in Percent-of-Closed status. Model 1250B performs nonlinear conversions, and can display data in user-defined units such as degrees, percent, inches, or feet on its 5-digit LED panel.... Read More

Test & Measuring Instruments

Measuring Machine measures with +/-.006 in. accuracy.

December 27, 2001

TRUMPF QUALIFIER (TQ) light/laser-based measuring machine can measure punched, formed, and laser-cut sheet metal parts simultaneously. Measuring machine also makes developing programs using reverse engineering possible by detecting actual contours of parts and converting data into CAD files. Available in 2 versions, TQ 2500 has 4 by 8 ft measuring area, and TQ 1250 has 4 by 4 ft measuring area.... Read More

Test & Measuring Instruments

Capacitance Meter comes complete with test leads.

December 21, 2001

Battery-powered, portable hand-held Model 810C can be used for measuring most capacitive components. It has zero adjustment knob, front-panel 3-1/2 digit LED display, test lead jacks and direct plug-in test sockets. Range is 20 mf to 200 pf with accuracy of ± 0.5% of reading, + 0.5 pf. It weighs 10 oz and measures 5.7 x 3.0 x 1.6 in. Meter comes complete with 9V alkaline battery and user... Read More

Test & Measuring Instruments

Pressure Calibrator has dust- and splash-resistant case.

December 21, 2001

Model 717 100G handheld, pressure calibrator measures pressure to 100 PSIG/690 kPa. It is suitable for gage, differential, absolute, vacuum, and compound applications from one inch of water to 10,000 psi. Model 717 100G measures pressure with 0.05% accuracy through its internal 100 PSIG sensor. It is equipped with 1/8 NPT pressure fitting, and is compatible with non-corrosive gases and liquids. Read More

Test & Measuring Instruments

Tensiometers continuously monitor cable tension.

December 21, 2001

RLT tensiometers coupled with force indicators provide real-time display and data capture of speed, distance, and tension for cable laying or winding/unwinding applications. 11 models are available with capacities from 20 lbs to 40,000 lbs. Units feature 3 roller bearing sheaves. Load cell transmits line tension as well as current peak, total distance traveled, and rate of travel, to indicator... Read More

Test & Measuring Instruments

Resistance Tester complies with CAT III 300V.

December 19, 2001

MEGGER® insulation resistance tester features backlit 3-digit LCD featuring digital display with analog arc; 3 output voltages including 250, 500, and 1000V; and hands-free continuity testing (0.01 to 99.9). Automatic voltage detection inhibits testing if operator accidentally connects to live circuit with voltage greater than 25V. Unit provides ac/dc voltage measurement up to 600V. Read More

Test & Measuring Instruments

Module is suitable for test and measurement applications.

December 18, 2001

Model 4867 data acquisition module can be used to control analog and digital devices from GPIB bus. It has 32 digital I/O lines, 6 relay driver outputs, 6 analog outputs, 6 analog inputs and 4 thermocouple inputs. Digital lines are high-power TTL lines with pullups that can be configured as inputs or outputs in 8-bit bytes. Relay driver outputs sink up to 300 mA and have reverse voltage... Read More

Test & Measuring Instruments

Infrared Thermometers have laser guide for accurate sighting.

December 18, 2001

Models CA870, CA872 and CA876 non-contact infrared instruments measure temperature in °F and °C. They have 3-1/2-digit backlit LCD display, auto-hold function and auto power off. Model CA876 includes type K thermocouple for taking temperature measurements in areas not suitable for infrared. It also offers MIN and MAX recording, LO and HI alarm, and adjustable emissivity from 0.1 to 1.00.... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Encoder mounts on machine or motor shaft.

December 18, 2001

Sealed Series HS20 Dynapar Hollowshaft Encoder is available in 2 in. configuration with English and metric hub sizes ranging from 1/4 to 5/8 in. and 6 mm to 16 mm. It mounts directly to shaft using hollow, floating shaft mount and anti-rotation spring tether. Unit has precision bearings and seals at both ends of hollow shaft, LED light source, operating speeds to 100 kHz and NEMA 4/IP65 rating.... Read More

Test & Measuring Instruments

Remote Stations provide intelligent signal conditioning.

December 18, 2001

Micro 2100-A4 and 2100-A16 Analog Input Remote Stations contain built-in stand alone on/off controllers and alarms. Model 2100-A16 has 16 controllers, while 2100-A4 has 4 controllers. Parameters that can be downloaded include control differential, auto/manual and manual on and off. Units require 1 pair of wire (RS485) or 2 pairs (RS422), to communicate with controlling host computer. They will... Read More

Test & Measuring Instruments

Pressure Transmitter handles shock and vibration.

December 17, 2001

Model P55 differential pressure transmitter operates in temperatures from -65 to 250°F, has NEMA 4 housing that resists spray and moisture, and performs accurately under shock and vibration. It can measure ± 2.2 in. H20 to 3200 psi in 23 ranges, handles range of working fluids, and has wet-wet capability to accept liquids and gases on both sides of sensing diaphragm. Compact unit measures... Read More

Test & Measuring Instruments

RTD Calibrator measures and simulates signals.

December 17, 2001

Programmable CAL20 can calibrate electronic process equipment such as controllers, transmitters and recorders. Programmable functions include automatic output value changing, ramp/step increment value, selectable engineering units and isolated signal conversion. All calibration values can be stored and recalled using Low, Mid and High keys. It has 500 Vdc I/O isolation, reverse polarity... Read More

Test & Measuring Instruments

Electronic Height Gauge measures with 0.0003 in. accuracy.

December 17, 2001

Altissimo Platinum Gauge measures ID, OD, center and total indicator runout, and calculates height, max, min, distance to last feature, and distance between last 2 points. It has 7 set-up functions ranging from probe calibration to display resolution. In addition, pressing hot key allows measuring routines to be selected on-the-fly. Capacitive measurement system operates on NiMH rechargeable... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Coating Probe measures small parts.

December 17, 2001

Handheld EGA06H probe measures nonmagnetic coatings, including zinc, chrome, copper, tin, paint and enamel on ferromagnetic base material using magnetic induction method according to DIN 50981. Measuring range is 0 to 28 msec. Small field effect is suited for measuring small parts or areas, such as nuts, bolts, screws and other fasteners. Smallest surface probe can measure is 0.08 in. dia., 0.04... Read More

Test & Measuring Instruments

Video Digital Multiplexer holds 60 dB signal-to-noise ratio.

December 17, 2001

Model VT/VR7830DRDT 8-channel video digital multiplexer with 2 bi-directional data channels provides integration of up to 8 channels of video with PTZ and access control on 1 optical fiber. Signals are transmitted via its 8-bit digital-encoding scheme, which supports NTSC, PAL and SECAM formats. VT/VR7830DRDT transmits real-time color video, and is designed to maintain consistent signal quality... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Gas Meter is suitable for small to medium line sizes.

December 17, 2001

CMF400 4 in. sensor, coupled with MVD Technology transmitter, provides gas flow accuracy of 0.35% and repeatability of 0.20%, with capability of measuring natural gas, for example, up to 110,000 scfm. With secondary containment standard and pressure rating of 1450 psi, CMF400 has UL, CSA and CENELEC zone 1 approvals. Read More

Test & Measuring Instruments

Oscilloscopes provide full-color display capabilities.

December 17, 2001

ScopeMeter® 196C and 199C have 200 MHz bandwidth and 2.5 GS/s real-time sampling rate per input. Model 196C is 100 MHz with 1 GS/s real time sampling. All ScopeMeter test tools are 2-channel oscilloscopes with separate high-speed digitizers per channel. 190 Series ScopeMeter test tools are 1,000 V CAT II and 600 V CAT III safety certified. 190C Series provide 4 hours operating time per... Read More

Test & Measuring Instruments

REFU Frequency Converter offers worldwide compatibility.

December 17, 2001

System200 REFUdrive with SERCOS interface connects to Profibus DP, Interbus S, and CANopen. It has output ratings from 1.5 to 600 kW, and allows decentralized drive structures with servo drives and frequency converters. Unit's drive functions include speed control, torque and speed regulation. Components provide 5 sector-specific system solutions including machine tools, printing/paper converting... Read More