Servomex Company, Inc.    Sugar Land, TX 77478
Oct 08, 2002 Model 2200 oxygen analyzer consists of paramagnetic oxygen measurement transmitter and separate microprocessor-based control unit. Control unit accepts inputs from up to 6 transmitters for oxidation control and process oxygen measurement requirements. It provides digital data communications to mainframe production control computers and can establish master-slave/client-server communication between intelligent devices.

DAS Distribution Inc.    East Granby, CT 06026
Oct 07, 2002 Takikawa LDM Series non-contact laser micrometers include Models 303H and 304H which can measure length, width, height, position, thickness, gap, and inside/outside diameter accurately to within ±2µm linearity with 0.1µm resolution. Model 303H offers measuring range of 0.25 to 30 mm, while Model 304H features measuring range of 0.5 to 90 mm. Both come complete with display processor, which includes High/Low Alarm Limits, RS-232 Interface, and ±10 Vdc Analog Output.

Applied Data Sciences, Inc.    Dallas, TX 75381 4209
Oct 07, 2002 DAQPOD combines digital thermometer, hygrometer, and barometer in handheld, 9 V battery-powered unit. It reads and sends real-time, polled weather sensor data via serial port when requested by laptop or desktop computer. ASCII commands poll sensors using programs such as Procomm or Hyperterminal. Included software allows upload of sensor readings. It also calculates air density, density altitude, dew point temperature, and water vapor percentage.

Setra Systems, Inc.    Boxborough, MA 01719
Oct 07, 2002 Model 227INT can be configured with 1.125 in. Down-Mount C seal or W seal interfacing base. C seal pressure fitting and small swept sensor chamber utilize VAR 316 stainless steel electropolished to 5 Ra finish, which eliminates particle entrapment. Transducer is available with 5 Vdc, 10 Vdc, or 4 to 20 mA output with ±0.25% of Full-Scale or ±1.0% of Reading accuracy. Pressure ranges are from –14.7 or 0 to 25 psi up to 0 to 3000 psi in gauge, absolute, or compound pressure.

Labsphere, Inc.    North Sutton, NH 03260 0070
Oct 04, 2002 Fully automated OPTRONIK SMS-10H measures automotive and general vehicle lamps in accordance with DIN, CIE, SAE, JIS, and KS standards. It includes motorized table with 2 rotational axes and 3 linear axes for precise positioning of test samples. Built-in alignment laser facilitates sample positioning to ensure repeatable measurement. OPTO software provides graphical interface with menu driven controls for data acquisition, display, and analysis.

Renco Encoders, Inc.    Goleta, CA 93117
Oct 04, 2002 Available with resolutions up to 2048 lines, model RCM15, 1.5 in. dia rotary optical encoder combines brushless motor commutation pulses and incremental position feedback. Offerings include company's slide/gap mechanism and one LED. Built-in servo groove allows ±20° rotation of encoder to align commutation tracks with motor poles. Encoder provides commutation for 4-, 6-, or 8-pole brushless motors.

Control Co.    Houston, TX 77258 8307
Oct 04, 2002 Traceable® Digital Meter continuously and simultaneously displays relative humidity and temperature in °F/°C with dual-recall memories. Minimum and maximum memories may be displayed or cleared at any time. Temperature range is 32 to 122°F and 0 to 50°C, with resolution of 1° and accuracy of ±1°C. Humidity range is from 25 to 95%, with 1% RH resolution. Accuracy is ±2% RH mid-range to ±4% RH elsewhere. Individually serial-numbered NIST Traceable Certificate is supplied.

Action Instruments, Inc.    San Diego, CA 92123
Oct 03, 2002 The I/O Pak(TM) DL Series intelligent data logging modules have Modbus, Profibus, and ASCII serial interfaces. They can log data from on-board I/O channels as well as other I/O Pak C-Series and K-Series modules on network. IOPK-DL100-U and IOPK-DL101-U support 8 or 6 universal analog inputs, respectively, while IOPK-DL104-T is dedicated to 4 PT-100 RTD inputs. All support modems, pager messaging on alarms, and scheduled and event driven data uploading.

Woodhead Canada Ltd. / SST    Waterloo On N2V 1n3, CD   Canada
Oct 03, 2002 Applications running under Windows® XP can be connected to Data Highway Plus, DeviceNet, or Profibus using SST Interface Cards. Computer bus formats supported include PCI, ISA, PC/104, PCMCIA, and Compact PCI (varies by network). Cards provide connectivity solution for various applications including PC Control, HMI, SCADA, Operator Interface, and diagnostics. They also support applications running under Windows® 95, 98, 2000, and Windows NT® operating systems.

Woodhead Canada Ltd. / SST    Waterloo On N2V 1n3, CD   Canada
Oct 03, 2002 Interbus Module for Allen-Bradley ControlLogix includes Remote Link Library software, which allows user to remotely download changes to program. Data is routed from Phoenix Contact's Configuration, Monitoring, and Diagnostics (CMD) software for Interbus through Rockwell Automation's RSLinx to Rockwell Automation ControlLogix backplane. SST Interbus module then takes routed data and acts on network as if CMD data were directly connected through local serial port.

Shimadzu Scientific Instruments, Inc.    Columbia, MD 21046
Oct 03, 2002 Designed to facilitate global compliance requirements, PharmaSpec UV-Vis includes comprehensive validation capabilities, 1.0 nm resolution, and built-in functions for the pharmaceutical industry. Stand-alone or PC controlled with UV Probe 32-bit software, spectrophotometer complies with all major international pharmacopoeia specifications.

Jamesbury, Neles - Metso Automation Brands    Worcester, MA 01615 0004
Oct 03, 2002 ValvGuardâ„¢ automatically monitors and tests emergency shutdown and emergency venting valve performance and provides warning so that actions can be implemented before dangerous situation occurs. Operators can test valve performance on-line, anytime without disturbing process. Since exact condition of valve is known at all times, scheduled maintenance periods can be extended and unnecessary process shutdowns and repairs avoided.

Shimadzu Scientific Instruments, Inc.    Columbia, MD 21046
Oct 02, 2002 The SALD-7001 Laser Diffraction Particle Size Analyzer offers violet semiconductor laser (405 nm wavelength) and strategically placed photo sensors, which can detect wide-angle scattered light signals up to 60°. Measuring range of SALD-7001 is 0.015 to 500 µm. Unit's single-violet laser light source coupled with single optical system enables accurate size determination of super fine particles by laser diffraction method.

Zeiss, Carl, Industrial Measuring Technology (IMT) Corp.    Minneapolis, MN 55428
Oct 02, 2002 CenterMax Production Measuring Center has effective measuring volume of 35 x 47 x 27 in. with accuracy of u1 = 1.3 + L/350. VAST universal scanning probe head covers wide array of measurement tasks. Temperature resistant frame consists of carriers made of invar, providing optimal thermal and dynamic damping properties and making measuring center resistant to extreme shop floor conditions. Accuracy is guaranteed over temperature range from 59 to 95°F.

Zeiss, Carl, Industrial Measuring Technology (IMT) Corp.    Minneapolis, MN 55428
Oct 02, 2002 Contura SELECT offers guaranteed length measuring error of MPE_E 2.0 + L/300 (according to ISO 10360-2). Models are available in 4 measuring ranges from 27 x 27 x 23 in. to 39 x 62 x 23 in. for variety of applications. VAST_XT probe head enables users to measure range of feature tolerances including form, size, and location. Machines can measure smallest features with probe tip diameter as small as 0.5 mm. Windows NT-based Calypso software is included.

Zeiss, Carl, Industrial Measuring Technology (IMT) Corp.    Minneapolis, MN 55428
Oct 02, 2002 Prismo VARIO offers x, y, z measuring ranges from 27 x 35 x 19 in. to 47 x 165 x 39 in. with accuracy up to ul = 2.0 + L/350, which is guaranteed from 64–79°F. Users can interchangeably replace probes for different measurement requirements. DT Dyna-touch probe permits indexing steps of 2.5° and measuring range of 2 x 360° in any axis of rotation. VASTXT active scanning probe head allows single-point measurement, scanning of form elements, and known and unknown contours.

Zeiss, Carl, Industrial Measuring Technology (IMT) Corp.    Minneapolis, MN 55428
Oct 02, 2002 Model PS200 Profile Scanner visualizes surface shape, which helps to obtain tangible information on function behavior of workpieces. Optical laser measuring technology provides probing up to 50 mm/s, capturing data quantity of up to 7,000 points/probing and up to 2,000 probings/surface. Integrated stray light sensors allow measurement angles up to 85°. XY stage has measuring range of 200 mm in X and Y directions. Linear guideways offer straightness accuracy of 2 µm/200 mm.

Zeiss, Carl, Industrial Measuring Technology (IMT) Corp.    Minneapolis, MN 55428
Oct 02, 2002 VAST Navigator, available for CenterMax Production Measuring Center, is based on dynamic stylus calibrations performed once for stylus configurations. Configuration can then be used for all scanning speeds and on different diameters. Helix Scanning function allows cylinder to be probed in continuous helical line as 1 element. Tangential probing provides continuous travel from probe path to probing process without having to stop and maneuver as in conventional methods.

Kontron    Poway, CA 92064
Oct 02, 2002 Model CP382 3U/4HP board incorporates over-temperature thermal shutdown at 302°F, under-voltage protection with upper threshold of 9.5 V, and maximum over-current protection of 1.2 A. Each of 24 digital channels offers up to 500 mA of output current. Unit has standard temperature range of 70 to 158°F, and is suitable for harsh industrial automation applications. Supported software includes Windows, VxWorks, and Linux.

BJM Corp.    Old Saybrook, CT 06475
Oct 02, 2002 EMCAT motor and transformer maintenance software package integrates with ALL-TEST IV Pro 2000 handheld fault finder and data collector. Combined, they perform testing and automatic analysis of AC/DC electric motors. Software incorporates trending, routing, scheduling of maintenance, work order management, review of equipment data by location or name, and entering of data from other test technologies.