Test & Measuring Instruments
(Showing headlines 13561 - 13580) << 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 ...
Handheld Pocket PC suits supply chain applications.
Norcross, GA 30092
Mar 07, 2003
Model MX5 mobile logistics computing solution runs on Windows® CE OS and incorporates color TFT reflective screen, full alpha-numeric keyboard, and ergonomically designed vertical form factor. Unit may also be equipped with internal, standard, or long-range 1D or 2D barcode scanner or imager. With IP65 rating, unit withstands water spray and is totally protected against dust. Product, suited for indoor/outdoor operation, also supports LAN and WAN radios.
Measuring System analyzes contour and surface roughness.
Mitutoyo America Corporation
Aurora, IL 60504 9176
Mar 06, 2003 Formtracer® CS-Series generates contour and surface roughness analysis from single measurement of workpiece. Model CS-3000, for smaller workpieces, offers max measuring range of 10 mm and max resolution of 0.8 nm. Model CS-5000 provides laboratory level accuracy, employing Laser Holoscaleâ„˘, which utilizes interference of diffracted light to achieve nanometer resolution. Formtracepak software provides analysis for dimensional/contour measurements such as radius, distance, and angle.
Oscilloscope offers 4 full-bandwidth 20 GSa/s channels.
Agilent Technologies, Inc.
Santa Clara, CA 95051
Mar 06, 2003
Infiniium 2.5 GHz oscilloscope can capture 4 real-time, single-ended and differential signals off single trigger event. By using dual-monitor mode, users can perform waveform analysis inside oscilloscope and display results on high-resolution monitor without having to transfer waveform data to external computer. Users can access and control oscilloscope from remote locations using built-in Web software and 10/100BaseT LAN connections.
Drawdown Columns check flow rate of metering pumps.
Neptune Chemical Pump Co., Div. Of R.A. Industries, Inc.
Lansdale, PA 19446 0247
Mar 06, 2003
Calibration Columns measure drawdown rate on suction side while leaving discharge undisturbed in normal steady state operation condition. Products can also be used to determine if check valves are worn or dirty. Available in capacities from 100-4,000 ml, products are suited for use with pump capacities up to 120 gph. Constructed of PVC, units have slip-on top caps for filling and cleaning. Internal calibration scales are protected by Mylar lamination.
Laser Range Meters measure distances up to 500 ft.
Tulsa, OK 74121
Mar 06, 2003 Models PD 22 and PD 28 provide measurements in 0.3 sec with accuracy of ±1/12 in. Pythagoras function can be used to measure height and width of building. In tracking mode, units measure distance continuously while operator moves tool. Model PD 28 includes data storage for up to 1,000 measurements, which can be transferred to computer or pocket PC. Both battery-powered meters include spike for corner measurements and bubble level for horizontal measurements.
PCI Board acts as instrument amplifier and filter card.
Costa Mesa, CA 92627
Mar 06, 2003
Programmable, 2-8 channel, plug-n-play AAF-3PCI signal conditioning instrumentation amplifier and filter card is offered in low-pass and high-pass filters, amplifier, or amplifier/filter/band-pass combination formats. Compatible with 12 or 16-bit A/D boards, product enables users to mix and match filter characteristics and independently select and program channel coupling, corner frequency, and gain steps up to x1,000 in single-ended or differential measurements.
Laser Energy Probes have large surface areas.
Coherent Inc., Laser Group
Santa Clara, CA 95054-1112
Mar 05, 2003 Multi-kilowatt, water-cooled Models PM1K-100, PM3K-100, and PM5K-100, with 100 mm diameter surface area, and Model PM5K-200, with 200 mm diameter surface area, measure energy output of diode laser bars, large cross-section laser beams, diode laser arrays, and high-divergence laser beams. Probes measure output of lasers ranging from 0.19â€“11 µm with 1 W power resolution. Devices feature maximum average power density of 26 kW/cm2 and maximum pulse energy density of 0.6 J/cm2.
Hollowshaft Encoders are suited for harsh environments.
Plymouth, MN 55441
Mar 05, 2003 Series 58 encoders are offered with M12, eurofast® quick disconnect, and overmolded mating cordsets. Coupled with Intelligent Sensing Technology, products offer short-circuit/over voltage/reverse polarity protection and aging/temperature compensation. Series is available in standard and metric bore sizes up to ˝ in. with incremental differential quadrature outputs to 36,000 ppr and absolute outputs to 14-bits in gray, binary, and bcd.
Three Phase Voltage Monitor comes in 2 x 2 in. package.
ABB Metals Systems
New Berlin, WI 53151 2840
Mar 05, 2003 Offered in surface-mount package, TVW Series/The Netâ„˘ continuously measures voltage from each of three phases. Unit uses microcomputer circuit design that senses undervoltage, overvoltage, voltage unbalance, phase loss, and phase reversal. TVW trip delay, factory fixed from 0.2â€“100 sec, prevents nuisance tripping, while restart delay, factory fixed from 0.4 sec to 999 min, prevents short cycling after momentary power outage. Unit comes with bi-color LED indicator.
Panel Meter suits applications that only require display.
Red Lion Controls
York, PA 17406 9428
Mar 04, 2003
Suited for applications that require basic display only, PAX Lite meter offers NEMA 4X front panel, 0.56 in. LED display, field set-up capabilities, and terminal connections. Series has models for digital inputs, such as count, rate, and process time, as well as analog signals, such as volt, current, process, strain gage, and temperature.
Multimeters include non-contact infrared thermometers.
Extech Instruments Corp.
Nashua, NH 03063
Mar 04, 2003
Multimeters incorporate IR thermometers, which provide measurements from -4 to +520°F, and laser pointers. With distance to target ratio of 8:1, units also offer fixed emissivity of 0.95. Extech 450 autoranging DMMs have 2,000 count display and 0.5% basic DCV accuracy, while Extech 470 autoranging True RMS multimeters offer 4,000 count display, 0.3% basic DCV accuracy, capacitance and frequency functions, and Type K thermocouple measurements.
Temperature-Calibration Probe features small diameter.
Burns Engineering, Inc.
Minnetonka, MN 55343
Mar 04, 2003 Series 12001 has 1/8 in. diameter with Inconelâ„˘ sheathing. It provides ±0.02°C accuracy with nominal drift per year of 0.01°C at 200°C. Hermetic seals lock out moisture and contaminants. Each probe comes with NIST-traceable ITS-90 calibration and certificate. Available in 6, 9, and 12 in. lengths, probe can be configured to variety of calibration equipment including stationary baths, portable blocks, and handheld readout equipment.
PC/104 Module includes 8 serial I/O ports.
Arlington, TX 76011
Mar 04, 2003 Model PCM-COM8 8-channel, serial asynchronous communications module provides each transmit and receive channel with 128-byte deep FIFO. All 8 channels support RS-232, RS-485, and RS-422 electrical levels to interface to serial communications devices. Two XR16C854 devices serve as serial communication controllers and contain on-chip, software programmable baud rate generators with data rates selectable through 115,200 bits/sec.
Power Cord/Sensor provides anti-automatic restart protection.
JDS Products, Inc.
El Dorado Hills, CA 95762 4072
Mar 04, 2003 SENSING-SAF-START® prevents small machines from restarting after power interruption. After power has been restored, unit will not reset until machine switch has been turned off. It replaces power cord on small machines such as table saws and drill presses, allowing them to conform to OSHA and NFPA safety standards by disconnecting machine's power during power loss. Three 120 V styles and one 240 V single phase style is available. All are UL recognized.
Brinell Testers suit production-volume testing applications.
NewAge Testing Instruments, Inc.
Southampton, PA 18966
Mar 04, 2003 Series 7000 uses load cell to accurately monitor test force. Testers are not affected by temperature changes and hydraulic warmup period. With hydraulic stroke range of 4 in., units adjust to test different sizes of parts. Capacity of standard model is 10 in. with elevating screw lowered and 16 in. with it removed. Standard horizontal capacity is 8 in. Systems are controlled electronically and all electronics are enclosed for use in bad operating environments.
Ultrasonic Thickness Gauge offers intuitive performance.
Agfa NDT, Krautkramer Ultrasonic Systems
Lewistown, PA 17044
Mar 04, 2003 Model CL 400 precision thickness gauge combines signal processing with compatible, damped, single element transducers. Instrument capabilities can be extended via optional A-Scan and programmable data recorder features. Unit provides parameter setups for delay, contact, and bubbler style probes as well as user-defined parameter setups. Offerings include help window with step-by-step procedures, six virtual keys, velocity value, and alarm bar graph.
Infrared Temperature Sensor suits OEM applications.
Mikron Instrument Co., Inc.
Oakland, NJ 07436
Mar 03, 2003 Non-contact MI-N3000 temperature sensor can be used in multiple locations to detect hot spots on moving material. Product can be used on dryers, conveyor belts, webs, and in thermoforming operations to sense temperature variation. Equipped with thermocouple and voltage outputs, unit measures temperatures from 34 to 932°F. It is suited for plastics, rubber, wood, paper, textile, glass and ceramic, paint, varnish, asphalt, and food applications.
Bench Multimeter has 5 ˝-digit dual display.
B & K Precision Corp.
Placentia, CA 92870
Feb 28, 2003 Model 5492, measuring 4.1 x 12 x 10 in., offers constant voltage or constant current operation. Utilizing 115 Vac outlet as power source, product incorporates dual display and ability to select display count (resolution) from 120,000, 40,000, or 4,000 counts. Additional features include 0.012% basic accuracy, and AC/DC voltage range of 750/1,000 V. Equipped with RS-232 interface, unit offers data hold function and selectable measurement rates.
Variable-Speed Viscometer offers range of 5â€“1,000 poise.
Brookfield Engineering Laboratories, Inc.
Middleboro, MA 02346
Feb 28, 2003 CAP 2000+ features shear rates from 10 sec-1 to 13,000 sec-1, and expanded temperature range from 5â€“235°C. It can operate in stand-alone mode or under PC control. With CapCalc software, unit provides detailed sample analysis with data in tabular and graphical format. Instrument is suitable for cone and plate applications including paints, coatings, adhesives, sealants, polymers and resins. It meets ASTM D4287, ISO 2884, and BS 3900 standards.
Signal Conditioner features TouchCAL(TM) technology.
Leesburg, VA 20175
Feb 28, 2003
Action Pak® Model AP4003-0001 socket-mount, isolating signal conditioner is field configurable for any 3-wire potentiometer input from 100 W to 100 kW, and provides selectable DC outputs of 0-10 V, 0-5 V, 0-20 mA, and 4-20 mA. Configuration via DIP switches enables maximum setpoint resolution. TouchCAL(TM) technology uses microprocessor to enable up to 80% adjustment of zero and span and facilitates calibration. Unit is powered by 120 or 240 Vac.
(Showing headlines 13561 - 13580) << 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755