Pomona Electronics    Pomona, CA 91766 3835
May 13, 2003 Model 6731 Differential Oscilloscope Probe conducts safe differential measurements. Suited for making floating voltage measurements while operating general-purpose oscilloscopes, product uses built-in differential amplifier to safely convert and scale floating signal to low-voltage signal referenced to earth ground. Probe offers 1000 V peak differential input voltage with 600 V CAT III max voltage to ground and switchable 20x or 200x attenuation.

LMS North America    Troy, MI 48098
May 13, 2003 SCADAS 305 supports 4-20 channels, providing data acquisition and signal conditioning capabilities. Scalability and modularity enables user to apply high number of measurement channels in extensive testing campaigns, or divide channels over multiple simultaneous testing assignments. All cables, including AC/DC power cable, plug in front side of unit. System includes on-board dual signal generation, built-in calibration source, and SCSI host interface.

FloCat    Kenosha, WI 53144
May 12, 2003 Model UB45-A utilizes paddle wheel design to measure continuous flows of solid-free liquids. Three body material choices and several connection options allow use of meter in neutral and slightly aggressive fluid media. Measuring range is 1.0–33 fps in pipe diameters from ½â€“2 in. When paired with electronic modules, Model UB45-A offers flow indicator, flow transmitter, flow switch, or batch controller.

Scientifics, A Division of Edmund Scientific    Tonawanda, NY 14150-6711
May 12, 2003 Pocket-sized Multimeter features large, 4,000 count, high-contrast LCD with bar graph. It offers auto power-off, auto-ranging with data hold and range hold, built-in storage compartment for integrated test leads, continuity beeper, diode test and battery check. Ranges include AC/DC 400 mv to 400 V, DC 400 mA, and resistance from 400 ohms to 40 Mohms. Unit comes with test leads and 2 LR44 batteries.

Teledyne Hastings Instruments    Hampton, VA 23661
May 12, 2003 Digital VT Vacuum Indicator offers vacuum measurement for DV-4 and DV-6 gauge tubes and interchangeability with existing analog versions. Self-contained device provides 3-digit LED display, 1/8 DIN package, and wall transformer with 5 V output. Offered for DV-4 pressure range of 1–20 Torr and DV-6 pressure range of 1–999 mTorr, unit includes jumper features, which are factory set.

Selco Products Co.    Reno, NV 89521-5908
May 12, 2003 Negative-temperature-coefficient (NTC) Series CS Thermistors and Series CP Probes offer almost unlimited options in materials, configurations, connections, lead types, and lengths. Thermistors are available in point matched or interchangeable tolerances of ±0.10-1.00°C and ±1-10° %. Resistance values at 25°C can be specified from 300 Ohms to 1 Megohm. Probes feature standard tolerances from ±0.5-1.00°C and ±1-10° % and are offered in all resistance-temperature curved materials.

RSF Electronics, Inc.    Rancho Cordova, CA 95670
May 12, 2003 Using chip-on-glass technology, LIK21 sensor measures 6 mm high and has max sensor speed of 10 m/sec. Digital, 1 Vpp analog, and vacuum-compatible models are available. Digital unit provides A-quad-B output with resolutions from 5–0.05 µm, while analog model provides resolutions of 0.025 and 0.0125 µm. Manufactured from stainless steel, linear encoder has grating periods of 20 µm, accuracies from ±1 µm, and measuring lengths up to 30 m.

Linear Technology Corp.    Milpitas, CA 95035
May 09, 2003 Model LT1568 ultra low noise (92 dB SNR) filter provides one pair of matched second order filter sections integrated on one chip. Matched filter response, gain, and phase repeatability from channel to channel is suited for I/Q applications. Internal passive and active circuitry is precisely trimmed for predictable and repeatable performance. Offered with single-ended or differential outputs, unit may be used as dual matched 2nd or 3rd order lowpass filter.

RTP Corp.    Pompano Beach, FL 33069
May 09, 2003 RTP 2300 Hybrid Control System provides data acquisition and control solutions that combine high-speed scanning with support for complex control algorithms. Offered as Singleton RTP-2300 and RTP 2300R Hot Standby Systems, latter provides fail-safe back-up protection at every level of configuration. Plug-and play architecture can be expanded or upgraded by adding I/O modules. Open-system design employs object-oriented programming.

FARO Technologies, Inc.    Lake Mary, FL 32746 6204
May 08, 2003 FARO Combo Package unites Platinum FaroArm Control Station® offering 4-12 ft reach and 6 degrees of freedom, and FARO Laser Tracker Si® with range of 230 ft. Both share same CAM2 Measure® software. Platinum FaroArm offers .0005 in. accuracy and enables users to inspect, reverse engineer or perform CAD-to-Part analysis. FARO Laser Tracker offers portability in measurement with accuracy of .001 in. Super ADM measures 1,000 times/sec and acquires target instantly.

Terahertz Technologies Inc.    Oriskany, NY 13424 4301
May 08, 2003 Hand-held HyperTest HPT-5000 provides real-time, automated, dual wavelength testing of optical power, optical return loss, and optical loss. It includes storage for 1,000 records, and comes in water-resistant case for field use. Backlit ¼ VGA LCD display enables user to view measurement values of calibrated wavelengths in use, view intuitive soft keys, and navigate menus. RS-232 port is provided for printer and PC download.

Mark-10 Corp.    Copiague, NY 11726
May 08, 2003 Model TSTM test stand features rotary table with tapped holes for fixture mounting and dial for angle measurement. It accommodates samples and fixtures up to 8 in. in diameter. Sensor bracket is part of lockable lever-operated slide mechanism for ease of engagement with test sample. Adjustable mechanical stops are provided for repetitive testing. Remote console contains adjustable speed control, operating internal motor from 0.3-9.0 rev/min.

Agilent Technologies, Inc.    Santa Clara, CA 95051
May 08, 2003 InfiniiMax Model E2695A is offered with 3 serial bus validation and compliance testing capabilities for 6 GHz Infiniium real-time oscilloscope. Probe capabilities provide differential SMA connections using one scope channel. Model E2688A Serial Data Analysis/Mask Testing with Clock Recovery package validates serial bus designs during development, performs mask testing, and characterizes serial data streams that employ embedded clocks.

Detroit Precision Hommel    Rochester Hills, MI 48309
May 07, 2003 Opticline noncontact metrology system measures form, dimensional, and positional tolerances of symmetrical parts in submicron detail. CCM and CFM Gageline multipoint contact systems measure crankshafts and camshafts, and can measure 20 parts/hr using Windows NT measuring software. Flexible shaft gaging system accommodates shaft sizes from 0.2 to 270 mm dia, 1 to 1,500 mm long with measuring accuracies to ±1 micron.

Mac Tools    Columbus, OH 43232-0940
May 07, 2003 Mac® Automotive Scope Meter combines 2-channel lab scope and full function true RMS multimeter. In dual channel mode, meter records at 25 MS/s for real-time diagnosis and analysis. There are 50 stored reference waveforms and 8 user-defined waveform memory locations to assist in diagnostic process. Equipped with 4.8 V NiMH battery, unit provides 4 hours of continuous operation. Wide 1 MHz bandwidth enhances testing and reporting capabilities.

C & D Technologies    Mansfield, MA 02048-1151
May 07, 2003 Series DCA5-20PC ammeters scale, digitize, and display output of 50 and 100 mV dc shunts. Direct-connect units are fully self-contained and accommodate supply voltages from 5-75 Vdc. They offer 11 current ranges from 0-1 A to 0-2000 A. Power supply options include 5-40 Vdc for 5/12/24/28 V applications, 8-36 Vdc for floating shunts, and -36 to -75 Vdc for -48 V Telco applications. Units are housed in 1.38 x 0.88 in. plastic package with 0.37 in. high LED display. Accuracy is ±0.1%.

Garner Industries    Lincoln, NE 68504
May 07, 2003 Offering abrasion resistance, heat and cold resistance, and low moisture absorption, BinMaster Diaphragm is constructed with Hypalon, Nylon, and Neoprene for use in harsh environments. Unit operates by sensing material pressing against diaphragm, which actuates sensitive micro switch that can be wired to actuate visual or audible alarms or start/stop processes. Product is suited for grain and aggregate storage.

Piller, Inc.    Middletown, NY 10940
May 07, 2003 InSite Plus Monitoring and Management System, through custom detailed graphics and intuitive interface, provides real-time assessment of essential equipment and operations within facility. Used with UPS systems and switchgear, InSite is based on standard PC technology utilizing Microsoft Windows OS and application software. Scalable network architecture supports multiple data collection interfaces. Operational, trending, and alarm event logs are automatically generated for analysis and diagnosis.

TTI, Inc.    Williston, VT 05495
May 07, 2003 Model PC6 Pro not only applies accurate pressure to sensor, but also reads current or mV produced by transducer. It can supply excitation voltage to power sensors or transmitters during calibration. Data is logged and stored with time and date stamping for future reference. Calibrator head can be supplied by itself or as complete kit with pneumatic or hydraulic pump, NPT fittings, pressure hose, and carrying case.

Sloan Valve Co.    Franklin Park, IL 60131
May 07, 2003 Model G2 Optima Plus® battery-powered Flushometer incorporates Isolated Operator for consistent performance regardless of water quality. Flex tube diaphragm flushing mechanism helps conserve water. Flushometer eliminates detection errors caused by lighting conditions and reflective surfaces. Electronic module meets NEMA 6 sealing requirements, and gold-plated battery contacts ensure consistent electronic connections. Rear drain/weep hole allows condensation to escape.