FARO Technologies, Inc.    Lake Mary, FL 32746 6204
May 08, 2003 FARO Combo Package unites Platinum FaroArm Control Station® offering 4-12 ft reach and 6 degrees of freedom, and FARO Laser Tracker Si® with range of 230 ft. Both share same CAM2 Measure® software. Platinum FaroArm offers .0005 in. accuracy and enables users to inspect, reverse engineer or perform CAD-to-Part analysis. FARO Laser Tracker offers portability in measurement with accuracy of .001 in. Super ADM measures 1,000 times/sec and acquires target instantly.

Terahertz Technologies Inc.    Oriskany, NY 13424 4301
May 08, 2003 Hand-held HyperTest HPT-5000 provides real-time, automated, dual wavelength testing of optical power, optical return loss, and optical loss. It includes storage for 1,000 records, and comes in water-resistant case for field use. Backlit ¼ VGA LCD display enables user to view measurement values of calibrated wavelengths in use, view intuitive soft keys, and navigate menus. RS-232 port is provided for printer and PC download.

Mark-10 Corp.    Copiague, NY 11726
May 08, 2003 Model TSTM test stand features rotary table with tapped holes for fixture mounting and dial for angle measurement. It accommodates samples and fixtures up to 8 in. in diameter. Sensor bracket is part of lockable lever-operated slide mechanism for ease of engagement with test sample. Adjustable mechanical stops are provided for repetitive testing. Remote console contains adjustable speed control, operating internal motor from 0.3-9.0 rev/min.

Agilent Technologies, Inc.    Santa Clara, CA 95051
May 08, 2003 InfiniiMax Model E2695A is offered with 3 serial bus validation and compliance testing capabilities for 6 GHz Infiniium real-time oscilloscope. Probe capabilities provide differential SMA connections using one scope channel. Model E2688A Serial Data Analysis/Mask Testing with Clock Recovery package validates serial bus designs during development, performs mask testing, and characterizes serial data streams that employ embedded clocks.

Detroit Precision Hommel    Rochester Hills, MI 48309
May 07, 2003 Opticline noncontact metrology system measures form, dimensional, and positional tolerances of symmetrical parts in submicron detail. CCM and CFM Gageline multipoint contact systems measure crankshafts and camshafts, and can measure 20 parts/hr using Windows NT measuring software. Flexible shaft gaging system accommodates shaft sizes from 0.2 to 270 mm dia, 1 to 1,500 mm long with measuring accuracies to ±1 micron.

Mac Tools    Columbus, OH 43232-0940
May 07, 2003 Mac® Automotive Scope Meter combines 2-channel lab scope and full function true RMS multimeter. In dual channel mode, meter records at 25 MS/s for real-time diagnosis and analysis. There are 50 stored reference waveforms and 8 user-defined waveform memory locations to assist in diagnostic process. Equipped with 4.8 V NiMH battery, unit provides 4 hours of continuous operation. Wide 1 MHz bandwidth enhances testing and reporting capabilities.

C & D Technologies    Mansfield, MA 02048-1151
May 07, 2003 Series DCA5-20PC ammeters scale, digitize, and display output of 50 and 100 mV dc shunts. Direct-connect units are fully self-contained and accommodate supply voltages from 5-75 Vdc. They offer 11 current ranges from 0-1 A to 0-2000 A. Power supply options include 5-40 Vdc for 5/12/24/28 V applications, 8-36 Vdc for floating shunts, and -36 to -75 Vdc for -48 V Telco applications. Units are housed in 1.38 x 0.88 in. plastic package with 0.37 in. high LED display. Accuracy is ±0.1%.

Garner Industries    Lincoln, NE 68504
May 07, 2003 Offering abrasion resistance, heat and cold resistance, and low moisture absorption, BinMaster Diaphragm is constructed with Hypalon, Nylon, and Neoprene for use in harsh environments. Unit operates by sensing material pressing against diaphragm, which actuates sensitive micro switch that can be wired to actuate visual or audible alarms or start/stop processes. Product is suited for grain and aggregate storage.

Piller, Inc.    Middletown, NY 10940
May 07, 2003 InSite Plus Monitoring and Management System, through custom detailed graphics and intuitive interface, provides real-time assessment of essential equipment and operations within facility. Used with UPS systems and switchgear, InSite is based on standard PC technology utilizing Microsoft Windows OS and application software. Scalable network architecture supports multiple data collection interfaces. Operational, trending, and alarm event logs are automatically generated for analysis and diagnosis.

TTI, Inc.    Williston, VT 05495
May 07, 2003 Model PC6 Pro not only applies accurate pressure to sensor, but also reads current or mV produced by transducer. It can supply excitation voltage to power sensors or transmitters during calibration. Data is logged and stored with time and date stamping for future reference. Calibrator head can be supplied by itself or as complete kit with pneumatic or hydraulic pump, NPT fittings, pressure hose, and carrying case.

Sloan Valve Co.    Franklin Park, IL 60131
May 07, 2003 Model G2 Optima Plus® battery-powered Flushometer incorporates Isolated Operator for consistent performance regardless of water quality. Flex tube diaphragm flushing mechanism helps conserve water. Flushometer eliminates detection errors caused by lighting conditions and reflective surfaces. Electronic module meets NEMA 6 sealing requirements, and gold-plated battery contacts ensure consistent electronic connections. Rear drain/weep hole allows condensation to escape.

E Instruments International LLC    Langhorne, PA 19047
May 07, 2003 Accurate up to 0.006% of reading, MicroCal 20 Documenting Process Calibrator ensures compliance of measuring and test equipment with quality calibration standards. Unit simultaneously performs measurement and simulation of 7 different parameters in addition to pressure calibration with 2 internal pressure sensors up to 300 psi FS or one external pressure sensor up to 10,000 psi. Offerings include data logging, HART protocol and built-in environmental module.

DIGI Americas    Norwood, NJ 07648
May 06, 2003 Models DC-200/300 feature three RS-232 ports, Ethernet connectivity, and internal resolution of 1,000,000 counts. Networking allows transfer of information to database for real-time inventory and eliminates hand-written errors. Two-line, dot-matrix LCD display shows quantity, and alphanumeric operator prompts for job sequencing. Model DC-200, with 30 hr rechargeable battery, is suitable for mobile counting. Model DC-300 includes direct thermal printer for label and report generation.

Lumex Inc.    Carol Stream, IL 60188
May 06, 2003 Model LPF-C041304S Right Angle Quad LED Fault Indicator snaps into standard circuit board, fitting over 4 SMT LEDs. Right-angle design carries light from LEDs to front panel. Unit is made of clear UL 94V-0 rated polycarbonate and has 4 round 0.110 in. indicators, on 0.200 in. centers. Distance from center line of LEDs to faces of each indicator is 0.630 in. Passive light guide can be stacked with mate, providing up to 8 front-panel indicators.

Agfa NDT, Krautkramer Ultrasonic Systems    Lewistown, PA 17044
May 06, 2003 Model MIC 20 combines Ultrasonic Contact Impedance testing for fine grained materials and rebound testing for coarse-grained materials. It is compatible with 10 UCI probes and 3 rebound impact devices, and will automatically recognize probe or device. Color LCD displays GUI using Windows standard, while touch-screen or keypad provides input and control of instrument functions. Measurement series can be displayed and analyzed as curve, histogram, or with statistics.

Analog & Digital Peripherals, Inc. (ADPI)    Troy, OH 45373 0499
May 05, 2003 DATAQ CF2 consists of 24-bit compact flash data acquisition card with 32 Kbytes of RAM. System uses low power and has sleep mode for power conservation. Programmable Pocket PC Test Panel Software provides ability to acquire, analyze, store and view data. Included software also turns pocket PC or laptop into fully functioning data logger, oscilloscope, multimeter, counter/timer, PH meter and various other instruments.

Dillon, A Div. Of Weigh-Tronix    Fairmont, MN 56031
May 05, 2003 Model AFG Force Gauge features Advanced Loadcell Cartridge, which provides interchangeable cartridges from 0.55-220 lbf and automatically recognizes loadcell range. It offers 5000 Hz data processing, RS-232 data transfer, and 0.1% accuracy. Model AFTI Force/Torque Gauge offers same features but without internal loadcell. Basic Force Gauge Model BFG comes in 6 capacities from 2.2 lbf-550 lbf with accuracy of 0.25%. Compact Force Gauge Model CFG is offered in 11 lbf or 45 lbf models with 0.5% accuracy.

Rosemount, Inc.    Chanhassen, MN 55317
May 02, 2003 Flush-mount Rosemount 1810 measures pressure or level of starches, fillers, paper pulp, and fibrous materials. Self-draining, gauge vent design is compatible with hygienic, tri-clamp, and PASVE valve connections. Accurate to 0.1% over calibrated span, unit covers pressures from 0.3–172 Bar. Machined internal vent path provides reliable and accurate gauge reference. Intelligent, digital field device powers PlantWeb® with information about health of device and process.

Leica Microsystems, Inc.    Buffalo Grove, IL 60089
May 02, 2003 Biomedical routine and research microscope lines include models DM LS2 and DM LB2 upright microscopes, which are ergonomically designed for user comfort. Offerings include Advanced Ergo Tube that provides adjustable viewing angle, telescopic eyepieces that adapt to users' physical characteristics, and Ergo-Lift height adjustable microscope plate with flexible hand rests. Coaxial drive knobs are available with easy-grip plastic caps.

ACCES I/O Products, Inc.    San Diego, CA 92121 1506
May 02, 2003 With 16-bit resolution, Model 104-AIO16-16 provides 500 Ksamples/second for its 16 single-ended or 8 true differential analog input channels. Functioning over –40 to +85°C temperature range, multifunction I/O board features 11 standard analog input ranges and filtered front end populated with low-noise components. In addition to direct data transfers, board can trigger A/D in real time, assuring synchronized sampling unaffected by other computer operations.