Test & Measuring Instruments
(Showing headlines 13141 - 13160) << 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 ...
Hygro-Thermometer offers non-contact operation.
Extech Instruments Corp.
Nashua, NH 03063
Jul 16, 2003
Model RH101 measures humidity, air temperature, and surface temperature without contact. IR thermometer provides measurements ranging from -58 to 932°F in locations that are unsafe or hard to reach. Eight to one field of view ratio allows 1 in. spot to be measured at distance of 8 in. Large backlit LCD provides visible readings even in dim light. MAX and Hold for all functions are available as well as Auto Power Off, low battery, and over range indication.
Measuring Products include tapes and wheels.
Raleigh, NC 27622
Jul 16, 2003 Equipped with 1 in. blade, Pro Series 25 ft metal and fiberglass measuring tapes have Dura-Lifeâ„¢ 5-rivet end hook, stainless steel reinforcement strip, and Ny-Clad® nylon powder coating on both sides of entire blade. Long Tapes are available in fiberglass and Ny-Clad steel with 3:1 gear ratio. Pro Series Measuring Wheels feature ergonomic handles with dual triggers that operate braking and counter reset functions.
Measuring System offers nanometric resolution.
Taylor Hobson, Inc.
West Chicago, IL 60185
Jul 15, 2003
Form Talysurf PGI 1240 delivers 0.8 nm resolution over 12.5 mm seamless measuring range, delivering ability to measure form, roughness, radius, inclination, and contour in one traverse. System utilizes Phase Grating Interferometry and has 200 mm horizontal measuring traverse and 450 mm vertical positioning traverse. Additional offerings include 0.125 µm horizontal data spacing, selectable traverse speed down to 0.1 mm/sec, and dedicated aspherics analysis software.
Data Acquisition Boards offer GPS time stamping.
Kirkland, WA 98033
Jul 15, 2003 Model PAR4CH consists of one 4-channel, 24 bit, A/D system that employs converter per channel architecture. Dedicated A/D chip for each channel eliminates crosstalk and settling problems. Able to connect to PC parallel port, unit includes 2 MB memory buffer and offers continuous, user-programmable acquisition rates from 0.1â€“5,000 Hz. Timing module PARGPS connects to PAR4CH and PC, providing 10 µsec accuracy time stamping along with other GPS parameters.
Signal Calibrator sources and reads mA, mV, and V.
Rochester, NY 14624
Jul 15, 2003 Transmation® 1048 Process Signal Calibrator is designed for calibration of 10-50 mA and and 4â€“20 mA instruments. It performs 2-wire simulations and automatically recalls up to 9 set points to run test sequences. Unit is primarily used in power plants and oil refinery applications.
Thermometer reads process temperatures to 3,630 °F.
E Instruments International LLC
Langhorne, PA 19047
Jul 15, 2003
Non-contact, digital IRtec Rayomatic Series offers temperature reading ranges from 32 to 3,630°F. Available with different optics, series allows linear emissivity, ranges, and averages to be set via PC. Additional features include compact design and optical infrared laser target pinpointing. IRtec 60 Model has flexible, infrared, fiber-optic, steel-coated cable that allows working temperatures to 392ºF.
Fiber Optic Test Facility simulates field applications.
M2 Optics, Inc.
Los Angeles, CA 90034
Jul 14, 2003 Fiber Lab 800â„¢ is a portable fiber management package, which houses single spool of up to 8 dB or 25 km single mode fiber with both ends terminated on front panel. Featuring clear Lexan® case with built-in handle, tabletop unit can also be rack mounted using optional tray. It is available with 10, 15, or 25 km of fiber or in user-specified attenuations at 1310 or 1550 nm, with standard SMF-28 fiber or other single or multimode fiber types.
High-Precision Tilt Sensor suits demanding environments.
Hampton, VA 23666
Jul 14, 2003 Compact T435 inclinometer measures to resolutions of less than 1 sec of one arc and withstands 1500 g of mechanical shock. Able to operate in temperatures of -18 to +70°C, closed loop, gravity-referenced tilt sensor measures 41 mm high and less than 37 mm in diameter. Offered with ±3° to ±90° ranges, self-contained unit may be stacked for simultaneous X and Y measurement of tilt angles and connects to DC power-source and readout or control device.
Laser Inspection System provides ±.002 in. accuracy.
Farmington Hills, MI 48331
Jul 14, 2003 Portable Laser Scanning Inspection System allows real-time inspection of parts against CAD models and point-cloud generation for reverse engineering applications. It includes choice of 6- or 7-axis portable coordinate measuring machine, laser scanner probe, and geometric and surface inspection software. System can collect and analyze over 23,000 points/sec. It avoids any contact with part that might cause marking of sensitive surfaces.
Handheld Thermometer offers ±0.05°C accuracy.
Hart Scientific, Inc.
American Fork, UT 84003 9775
Jul 14, 2003 With â€“100 to +135ºC range, Model 5577 Intrinsically Safe Handheld Reference Thermometer is capable of operating in specified hazardous environments. NIST-traceable, portable system, consisting of meter and probe, has 2 inputs and can display simultaneous side-by-side readings from both inputs or differences between inputs for comparison. Applications include petrochemical refineries and natural gas firms.
Light Meters provide 0.01 resolution and 3% accuracy.
Extech Instruments Corp.
Nashua, NH 03063
Jul 14, 2003
EasyView(TM) Model EA30 measures 40-40,000 Fc, while Model EA31 measures from 20-20,000 Fc. Remote sensor with protective cover incorporates precision silicon photo diode. Readings are displayed on LCD with low battery and over range indications. Measurements are cosine and color corrected. Meters include Data Hold, Min/Max readings, and Auto Power Off. Model EA30 also features bar graph, Relative function, and Peak Hold to capture short light pulses to 100 µsec.
Test/Burn-In Socket accommodates devices up to 13 mm².
Aries Electronics, Inc.
Bristol, PA 19007-6810
Jul 14, 2003
Type BGA/CSP test and burn-in socket handles devices with pitch from 0.50 mm or larger in applications up to 1 GHz. Solderless, pressure-mount, compression spring probes are located by 2 molded plastic alignment pins and secured with 4 stainless steel screws. Socket accommodates up to 500,000 cycles. Spring probe contacts are 9-12 g per contact for 0.50-0.75 mm pitches, and 17-20 g per contact for 0.80 mm pitches and larger. Socket operating temperature is -67 to 302°F.
Structural Integrity Tester enables automated part inspection.
Modal Shop, Inc., The
Cincinnati, OH 45212 3554
Jul 11, 2003 NDT-RAMâ„¢ Resonant Acoustic Method for Non-Destructive Testing system comes in kit configuration suited for integration with existing automated component handling systems. Product uses resonant inspection to test structural integrity of powder metal, cast or forged components. NDT-SEMI includes NDT-RAM software running LanSharc smart digital controller with NDT-MICI microphone sensor, electric impact hammer, touch panel computer with 15 in. LCD, and acoustic test chamber.
Compact Balances have stainless steel weighing pan.
Paul N. Gardner Co., Inc.
Pompano Beach, FL 33060 6608
Jul 11, 2003
Equipped with backlit, 16 mm high LCD display, EK-i and EW-i Series can be read at wide viewing angle in dark environments. Offered in 12 models from 30 g to 12 kg, both series provide control zero, mode selection, and data output with RS-232C. Additional features include 9 built-in weighing units plus counting and percentage, comparator function, and full digital calibration with optional user definable mass setting. Models in EW-i series offer triple range weighing.
Differential Pressure Switch/Gage saves panel space.
Dwyer Instruments, Inc.
Michigan City, IN 46361
Jul 11, 2003
Series MP Mini-Photohelic combines Minihelic II® differential pressure gage with 2 SPDT switching setpoints. It measures and controls positive, negative, or differential pressures consisting of non-combustible and non-corrosive gases. Gage reading is independent of switch operation. Switching status is visible by LED indicators located on front and rear of gage. Compact size makes unit suitable for fume hoods, dust collection, and pneumatic conveying.
Digital I/O Card expands available I/O in SBCs.
Davis, CA 95616
Jul 11, 2003
Suited for use with company's SBCs (BL2500) and operator interfaces (OP7200), RN1100 RabbitNet I/O expansion mechanism is based on 3-wire, full duplex technology. Product utilizes off-the-shelf Ethernet cables, transmitting data at rates to 1 Mbit/sec over maximum recommended distance of 33 ft. Mounted on 100 mm DIN rail tray, unit features I/O set consisting of 24 inputs and 16 sink/source outputs. It also offers four 10-bit buffered analog input channels.
Coordinate Measuring Machine has 15 ft articulating arm.
Farmington Hills, MI 48331
Jul 10, 2003 Designed for measuring, inspecting, and reverse engineering of large work-pieces, portable STINGER IIâ„¢ will measure to ±.0078 in. in single point articulation test. Volumetric length accuracy is ±0.011 in. with hard probe and ±0.013 in. with laser scanning probe. Unit is also offered with 6, 8, 10, or 12 ft measuring envelope and ships with HighRES reverse engineering software, which allows seamless migration of point data into CAD programs.
Accelerometers/Inclinometers withstand extreme environments.
French Technology Press Office, Inc.
Chicago, IL 60601
Jul 10, 2003
Series 46000 utilizes micro-machined silicon technology. Accelerometers offer ranges of ±2 and ±10 g. Inclinometers come in 4 types with angle-measurement ranges from ±5 to ±90°. Unregulated power supply and high-output signal allows use without external conditioners. With operating temperature from -40 to +257°F, Series 46000 is suitable for servo control, angular control, and measurement of pitch, roll, and acceleration in railway, aeronautical, and metal production environments.
DAQ Board is suited for PCI Bus.
Exacq Technologies, Inc.
Indianapolis, IN 46250
Jul 10, 2003 CH Series combines multi-input data acquisition with built-in memory and dedicated processor. Utilizing on-board, 143 MHz, 32-bit DSP, 16 MB local waveform memory, and PCI bus mastering, product provides glitch-free capture/playback of analog signals. Dual output analog channels offer simultaneous 20 million samples per second per output or 40 million samples per second on 1 output. It also offers Arb/Function generation and analog reconstruction filtering.
Tester/Calibrator works with LCD, DLP, and LCoS projectors.
Radiant Imaging Inc.
Duvall, WA 98019
Jul 10, 2003 PTS provides turnkey solution for testing and calibration of front and rear projection systems, delivering measurements of display brightness, uniformity, contrast ratio, color, color uniformity, distortion, focus, gray scale, and convergence. Product also detects and identifies display defects and blemishes. System elements include PM-1400 CCD based imaging colorimeter, control PC, and ProMetric 7.0 software for data acquisition and image processing.
(Showing headlines 13141 - 13160) << 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754