Mocon    Minneapolis, MN 55428
Jun 16, 2004 PERMATRAN-W® Model 398 provides alternative for testing of medium- to high-barrier structures. Operating via WinPerm(TM) software, unit enables 2 films to be tested simultaneously at 2 different RH conditions. Automated temperature and relative humidity controls, as well as automatically determined equilibrium, minimize chance of operator error. Modular system offers two 50 cm² test cells and allows control of up to 10 modules from single computer.

Mocon    Minneapolis, MN 55428
Jun 16, 2004 Portable PAC CHECK® Model 325 oxygen and carbon dioxide analyzer measures controlled and/or modified atmospheres in food packages. Sticky Foot(TM) probe houses needle internally for protection. Tacky septum, attached to bottom of probe, rests against package. Needle is actuated by twisting outer housing which allows it to penetrate package, thereby measuring internal gas levels. Analyzer includes 128 x 68 LCD display and password-protected calibration and setup.

Mettler-Toledo Ingold    Bedford, MA 01730
Jun 16, 2004 Multi-parameter Series M 700 allows simultaneous measurements of up to 3 parameters such as pH, ORP, conductivity, temperature, and dissolved oxygen. Backlit display shows process parameters, sensor-related data, and differential measurement. Model M 77C features coated steel enclosure for harsh chemical processing in hazardous areas. Model M 700S comes in hygienic stainless steel enclosure for pharmaceutical and food and beverage applications.

Austria Microsystems Incorporated    Raleigh, NC 27615
Jun 16, 2004 Multiple output, 10-bit system-on-chip, Model AS5040 integrates field sensing Hall elements, analog front-end, and digital signal processing. It operates in contactless system with small magnet that is placed above or below device. Operating at 3.3 or 5 V, encoder provides absolute, incremental, and pulse width modulated digital output signals simultaneously. It can detect 1,024 positions in full 360° magnet turn. Operating temperature is -40 to +125°C.

Instron Corporation    Canton, MA 02021 1089
Jun 15, 2004 Series SATEC™ testing systems are available 2 model types ranging in capacity from 33,750–135,000 lbf. Testers combine frame, hydraulic power supply, electronics, and control panel into single machine. DX line features hydraulically powered load frames that include 2 test spaces, allowing tension and compression tests to be performed in separate areas. LX models have rigid 2-column load frame to provide test space to accommodate range of specimen sizes at comfortable working height.

Protek Test & Measurement    Englewood, NJ 07631
Jun 14, 2004 Model Z-8200 offers 100 Hz, 120 Hz, and 1 kHz test frequencies and has built-in comparator with 4-bin sorting capability. With series and parallel equivalent circuit modes, it also provides auto ranging with data hold, includes open and short circuit calibration, and pass/fail binning alarm. Measurement ranges include 1 mohm to 999.99 Mohm for resistance/impedance, 1 µH to 999.99 H for inductance, and 1 pF to 999.99 µF for capacitance. Measurement rate is 2/sec.

Emerson Process Management    Austin, TX 78754
Jun 14, 2004 Rosemount 3051S, with scalable architecture and supervisory electronics, converts to TC-ViT certified pressure transmitter for use in SIL 2 or SIL 3 safety instrumented system (SIS). SuperModuleâ„¢ design platform offers primary elements, diaphragm seal assemblies, and instrument manifolds that enable integrated, compact measurement solutions to serve all flow, level, and pressure applications in process plants. Hermetically sealed stainless steel housing withstands harsh field environments.

Biosystems Div., Bacou USA Safety Inc.    Middletown, CT 06457
Jun 14, 2004 PosiCheck3â„¢ computerized performance testers for air-supplied breathing apparatus are available with microphone Sound Detection System, which eliminates human error by automating primary audible alarm test. Small microphone automatically detects when audible alarm starts and stops during testing procedures. System can be used with both bell and whistle alarms, and will not be adversely affected by ambient noise, such as PASS devices or communications.

Acromag, Inc.    Wixom, MI 48393 7037
Jun 14, 2004 BusWorks® 972EN and 973EN Analog Output Modules deliver data from Ethernet Modbus/TCP 10/100 network as voltage or current signals to as many as 6 measurement or control devices. Each 1 in. wide module contains 12-bit D/A converter, microcontroller, and Ethernet interface. Operating off 15–36 Vdc supplies, 972EN models provide user-selectable dc current output ranges of 0–1, 0–20, and 4–20 mA, while 973EN models offer selectable dc voltage output ranges of 0–1, 0–5, or 0–10 V.

Packaging Technologies & Inspection - PTI, LLC    Tuckahoe, NY 10707
Jun 14, 2004 Model Pti-225 is offered with drawer-type tooling, which tests different size pouches simultaneously. It features touchscreen interface and RS232 quality-control data collection for further package evaluation or quality performance tracking. System stores up to 20 different testing programs for 20 different types of packages. It is suited for non-destructive testing of filled and sealed cups, trays, and pouches made of porous or non-porous materials.

Heim Data Systems, Inc.    Belmar, NJ 07719
Jun 14, 2004 Models GSR20f and GSR200f are ground station and test cell recorders that capture vibration data created from fatigue and crash testing of industrial stuctures and components. They feature all digital recording, signal interfacing, and interchangeable media. Rack-mounted, Model GSR200f provides 240 Mbit/s recording, while Model GSR20f offers 20 Mbit/s capability. Both have plug-in media cartridges that accept tape, disk, or solid-state drives.

National Instruments Corp.    Austin, TX 78759-3504
Jun 11, 2004 Series NI 843x RS-232/485 serial interfaces provide flexible baud rate capabilities, allowing engineers to communicate with devices that operate with non-standard baud rates ranging from 57 b/s to 1 Mb/s. Driver software offers universal PCI support for 3.3 and 5 V I/O, as well as DMA access. Combined with LabVIEW 7.1 I/O Assistant, boards are suited for serial applications such as machine control, manufacturing test, and traditional instrument control.

Lascar Electronics, Inc.    Palo Alto, CA 94303-0727
Jun 11, 2004 Model SP 400-BLUE consists of 3½ digit LCD voltmeter with blue LED backlighting for bright, clear readability under low-light conditions. Features include low-battery warning, 200 mV DC measurement range with auto-zero and auto-polarity, and user-selectable decimal points. Negative rail generator enables meter to measure signal referenced to its own power supply GND. Housing design ensures splash proofing when used with supplied seal.

Care Controls, Inc.    Mill Creek, WA 98082
Jun 11, 2004 Integrating with existing rotary labeler, Canalyzer Model KLI mounts inside labeler's enclosure and uses several sensing technologies to inspect cans for label defects. Controls are mounted near labeler control, allowing one operator to run both machines. Canalyzer provides up to 1,500 inspections/min and handles any can size from 202–603. With addition of barcode module, unit reads barcode on each container to insure proper label is being applied.

Fairchild Semiconductor Corp.    South Portland, ME 04106
Jun 11, 2004 Quad-, 6- and 8-bit LCX and VCX series low-voltage logic functions reduce noise and crosstalk between I/O terminals. Chips have exposed die attach paddle underneath and visible solder joints. Products include 2.5–3.3 V bi-directional octal transceiver; 2.5–3.3 V octal buffer line driver; 2.5–3.3 V decoder/demultiplexer; 1.2–3.3 V quad dual-input and gate; and 1.4–3.3 V bi-directional octal transceiver.

AW-Company    Franksville, WI 53126
Jun 11, 2004 Featuring stainless steel construction, KVM series is manufactured in accordance with FDA standards with no bores or welded seams. Connections include wafer, flange, or tri-clamp, and outputs include 4–20 mA or pulse signals. With line sizes available up to 10 in., vortex flow meter has fluid flow range of 0.4–1,000 m³/h and gas flow range of 2.5–9,750 m³/h. Remote or meter mounted unit has max fluid temperature of 750°F and max ambient temperature of 150°F.

Yokogawa Corp. Of America, Meter & Instrument Div.    Newnan, GA 30265
Jun 11, 2004 Admag AXF series offers dual-frequency excitation method, where user can select 165 Hz high-frequency component to measure high-concentration slurries. It also provides diagnostics to detect electrode coating, combined with optional replaceable electrode design. Converter displays up to 4 different levels of coating and features alarm function; 0.35% typical accuracy; min fluid conductivity of 1 µS/cm; and backlit, full dot matrix, 3-line display with IR switches.

Microstrain, Inc.    Williston, VT 05495
Jun 11, 2004 Agile-Link™ wireless sensor system, capable of simultaneous, high-speed data acquisition, is for use with wireless strain gauges, accelerometers, temperature, and millivolt level inputs. It supports up to 26 distinct nodes and base stations to communicate real-time digital sensor data simultaneously in license-free ISM band of 902–928 MHz. Receiver sensitivity greater than 110 dBm allows nodes to cover distances of 150 m line of sight.

Measurement Computing Corp.    Norton, MA 02766
Jun 11, 2004 USB-GPIB Controller Module converts any PC with USB interface into full-function, IEEE 488.2 Bus Controller. Based on CB7210 chip, unit performs all basic IEEE-488.1 functions such as talker, listener, and system controller. Module plugs into any open GPIB connector, while jackscrews secure and hold module in any position. Three LEDs provide visual status indication. Module includes GPIB driver and supports programs that run on Windows 98/ME/2000/XP.

Dresser Instruments, Dresser Measurement & Control, Dresser Inc.    Stratford, CT 06614-5145
Jun 10, 2004 Ashcroft® Type 1134 pressure gauge features dual side or back connections, panel mounting hardware, stainless steel case, and 4 wrench flats. It is designed to fit 4 9/16 panel cutout and can also be pipe- or surface-mounted. Switch option, available with up to 2 set points, is enclosed in IP65 watertight housing. Product is suited for fume hoods, filter monitoring, and bio-pharm applications.