Test & Measuring Instruments
(Showing headlines 11681 - 11700) << 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 ...
UV Lamps detect pinhole-size leaks in HVAC/R systems.
Westbury, NY 11590
Dec 03, 2004 MAXIMAâ„˘ ML-3500D and ML-3500FL combine Micro Discharge Light technology with filter and bulb/reflector assembly. MAXIMA ML-3500D features spot bulb and diffusing filter that produces steady-state intensity of 14,000 µW/cm˛ at 15 in., while MAXIMA ML-3500FL uses flood bulb that delivers steady-state intensity of 4,5000 µW/cm˛ at 15 in. Suited for HVAC/R technicians, units are available in 120 and 230 Vac versions, and offer instant-on operation.
Inspection Sensor verifies shapes and contours.
ifm efector, Inc.
Exton, PA 19341
Dec 03, 2004
Efector dualis monitors error-proofing applications through contour evaluation, providing 100% inspection testing throughout assembly automation process. To detect component defects, sensor is used with IR light source for pass/fail indication and has 4-LED indicators for power, sensor on-line, contour detected, and contour not detected. Built-in intelligence includes miniature CMOS element as its image processor, DSP, and integrated electronics.
Laser Sensors offer long stand-off and measurement range.
LMI Technologies Inc.
Southfield, MI 48075
Dec 03, 2004
Series DLS-2000 single point laser sensors have offset distances of 4.0 in., 10 in., or 19.7 in. for long-range version. They deliver 25 micron resolution at 1.8 kHz scan rate, 1.667 kHz for long-range version. Measurement range is 11.8, 24, or 118 in. with accuracy of ±0.05%. Digital RS-232 and RS-485 interface converter permits interface connection to most PC or PLCs, and aluminum enclosure allows operation in temperature range of 32°-122°F.
Spectrometer analyzes all common elements in metals.
AMETEK Spectro Analytical Instruments Inc.
Mahwah, NJ 07430
Dec 02, 2004
Able to analyze Nitrogen levels in steel down to 20 ppm, SPECTROMAXx incorporates ICAL intelligent calibration logic, which monitors system integrity and virtually eliminates need for recalibration samples. Unit is also equipped with Argon Saver Mode and readout system that minimizes analysis time. Spectrometer is available as bench-top unit or floor model to fit various work load or space requirements.
Pressure-Based Flow Meter offers real-time outputs.
McCordsville, IN 46055
Dec 02, 2004
Featuring NEMA 4 housing, F-Series uses pressure change through venturi to determine flow of gas. No sampling, calculating, or averaging is required. Available 0-10 V or 4-20 mA, ranges start below 1 scfm and extend through 250 scfm. Product is available in 5 different port sizes.
XRF Analyzer measures coating thickness.
Oxford Instruments Analytical
High Wycombe HP12 3SE United Kingdom
Dec 02, 2004 Utilizing 100 W X-ray tube, X-Strata960 provides composition analysis and coating thickness measurement. Small collimator analyzes micro-features, while large chamber and XY table handle large parts. Featuring integrated PC and monitor, analyzer provides distance-independent measurement for complex sample geometry, and includes Auto Range Finder, which eliminates operator error. It is suited for metal finishing, electronics, and precious metals industries.
Data Logging Kit maps temperature and humidity.
Veriteq Instruments Inc.
Richmond BC V6X 2W8, CD Canada
Dec 01, 2004 Veriteq VL-2000 Validatable Data Logging Kit includes one or more VL-2000 data loggers, 21 CFR Part 11 compliant data logging and graphing software, A2LA-accredited calibration certification, and IQ/OQ validation protocol. Each data logger is self-powered by 10 yr lithium battery and has internal memory of 21,500 time-based readings. Accurate to 0.15°C and 2% RH over -40 to +85°C range, kit provides wireless alternative to cabled thermocouple validation.
Test System combines leak and seal testing.
Minneapolis, MN 55428
Nov 30, 2004
Lippke 2500 SL measures both pressure loss and burst pressure. Leak testing can be conducted on flexible, semi-rigid, and rigid packages, while seal strength tests can be conducted on flexible and semi-rigid packages. Offering test documentation such as graphs, measurement database, and statistics, system is suited for quality control/quality assurance monitoring, raw material qualification, and determination of optimum seal parameters.
Blister Tester automates methylene blue dye test.
Minneapolis, MN 55428
Nov 30, 2004
Lippke Blister-Tester VC 1380 utilizes bowl-shaped chamber filled with water to which blue dye is added. Filled blister is secured at bottom of bowl and remains in methylene blue dye under atmospheric pressure for predetermined amount of time. If there is a leak in blister or backing seal, dye-filled water breaches structure and penetrates specific cell. Parameters for vacuum, test time, and penetration time are adjustable and can be stored in database.
Laboratory DAQ Instruments are Ethernet-based.
Bedford Heights, OH 44146-1833
Nov 30, 2004 Suited for bench-top data acquisition applications, DaqLab/2000â„˘ Series is capable of expansion to hundreds of channels. It incorporates 16-bit ADC coupled with Ethernet engine as well as front-panel signal I/O. Expansion channels can be added via DBK boards, and unit offers 16K location scan sequencer. All built-in and expansion channels are scanned up to 200 kHz. Unit includes DaqViewâ„˘ software for data logging, real-time display, and storage to disk.
Weight Indicator is NEMA 6/4X rated and washdown-safe.
Fairmont, MN 56031
Nov 30, 2004 Able to meet demands of outdoor applications, E1010 is resistant to pressure washing and impervious to corrosive moisture, dust, and airborne particulates. Product features stainless steel enclosure, communication port, 22-key sealed keypad, and LED with seven 0.8 in. digits. Powered by 100â€“240 Vac, unit is equipped with internal rechargeable battery for up to 23 hr continuous operation. On-board memory permits storage of tares and numeric IDs.
Wireless Multiplexer suits broadband communication networks.
Calgary Alberta T2E 8J5, CD Canada
Nov 26, 2004
Libra MX meets requirements of point-to-point and point-to-multipoint broadband applications while providing migration path to WiMAX compliant networks. Based on W-OFDM technology, flexible solution includes base stations and subscriber units. It operates in 3.5 GHz frequency band, delivering throughput of 288 Mbps to up to 12,000 users per cell at range of up to 30 km. Carrier-class design enables prioritized triple-play services: video, data, and voice.
Modules offer sixteen 16 bit D/A converters per board.
Wixom, MI 48393 7037
Nov 26, 2004 IP231 Industry Pack mezzanine module allows simultaneous D/A conversion across all channels, which enables unit to write sixteen 110 V outputs in 135 seconds for high-speed processing. Users can populate VME, PCI, or CompactPCI mezzanine carrier card with up to 5 IP231 modules for high-density single-slot solution. Optional versions offer extended temperature ratings for harsh environments.
Manifold System offers tool monitoring and qualification.
Lighthouse Worldwide Solutions
Medford, OR 97501
Nov 26, 2004 MiniManifoldâ„˘ consists of manifold sequencing system with built-in controller and miniblower for purge flow. It allows single particle counter to monitor up to 6 locations simultaneously. Controller communicates with particle counter and can interface to computer or process tool via RS-485/MODBUS communications protocol. MiniManifoldâ„˘ offers user-programmable sampling and includes built-in buffer to store data records.
Locator guides users to cameras and transmitters.
Elyria, OH 44035
Nov 24, 2004
Featuring multi-directional antenna technology, NaviTrack Scout(TM) uses 4 distinct sonde frequencies to locate cameras and remote transmitters while eliminating nulls and false peaks. It can be used to trace 3 line trace frequencies as well as passive ac. Unit includes digital readout with micro-mapping display. Display panel shows digital strength, sonde/lone trace frequency, depth over target, battery strength, and target's field angle.
UV-Visible Spectrophotometer is FDA compliant.
Cambridge CB4 0FJ United Kingdom
Nov 23, 2004 Featuring 1 nm bandwidth optical system, Libra S35PC includes 8-position sample changer and Press-to-Read deuterium lamp technology, which only runs source at maximum energy during actual measurement sequence. Providing 21 CFR part 11 compliance, Acquire software incorporates password protection and audit trail facility that is permanently active to record every transaction. CFR Administrator tool defines access privileges for individual operators or groups.
Meter facilitates testing of molybdate formulations.
Erlanger, KY 41018 0733
Nov 23, 2004 Used as corrosion inhibitor in industrial water treatment, battery-powered Molybdate Duo Meter features pushbutton measurement functionality and incorporates 10 mm LCD display and automatic switch-off. It tests concentration levels from 0â€“100 mg/l MoO4 as well as trace amounts as low as 0.10 ppm in 0â€“20 mg/l MoO4 range. Splash-proof unit, suited for bench or field use, is supplied as complete test kit with reagents.
Battery Watering Monitor uses dual color indicator light.
Montgomeryville, PA 18936
Nov 23, 2004 Utilizing microprocessor technology for water level indication, SmartBlinkyâ„˘ monitors electrolyte levels over period of time. Indicator light changes from green to red when battery needs water, and microprocessor protects unit against reverse polarity connection and incorrect voltages. Indicator body can be mounted on outer edge of battery. Unit is also suited for monitoring water levels in multi-level changers and narrow aisle vehicles.
Glass Thermometers are mercury-free.
Swedesboro, NJ 08085
Nov 23, 2004 Thomas® Thermometers are filled with non-hazardous, non-toxic, biodegradable liquid. Easy-Read® units feature high-contrast, black on yellow design that helps eliminate reading errors and supports ISO 9001. Double-Safe® thermometers offer same high contrast with additional security of Teflon® coating in case of accidental breakage. Made from lead-free glass, Enviro-Safe® units feature green liquid against white background for easy reading.
Testing Module provides ADSL2+ service verification.
Sunrise Telecom Inc.
San Jose, CA 95119
Nov 23, 2004 Model ADSL2+ ATU-R supports multiple ADSL technologies, including ITU-T ADSL2+ standard for combined voice, internet, and video services. Using 1-button test function, test set attempts to synchronize with far end DSLAM, and upon achieving link-up, presents summary screen of key results including achieved data rate and SNR margin. With 2.2 MHz bandwidth, SunSet MTT ACM chassis enables technicians to properly assess copper plant for ADSL2+ services.
(Showing headlines 11681 - 11700) << 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760