Picosecond Pulse Labs, Inc.    Boulder, CO 80301
Jun 02, 2005 Designed for use in high-end digital radar receivers, 7600 Down Conversion Sampling Module employs Non-Linear Transmission Line (NLTL) technologies and terahertz diode construction. It offers consistent linearity performance over 25 GHz of RF bandwidth at sampling rates to 2 GHz. Able to replace traditional mixers and reduce complexity of current broadband radar system architectures, product features sampling rate of 10 MS/sec to 2 GS/sec.

Bede    Durham DH1 1TW  United Kingdom
Jun 02, 2005 Digital X-ray inspection tool, BedeScanâ„¢, is used for identification and quantification of structural defects in semiconductor wafer substrates and epilayers up to 300 mm in diameter. Defect mapping tool uses non-destructive X-ray diffraction to identify anomalies in incoming and processed wafers and delivers quantitative data that enables in-line statistical control of manufacturing processes. Imaging of wafers is possible in reflection and transmission modes.

Malvern Instruments Inc.    Westborough, MA 01581
Jun 02, 2005 Insitec At-line Powder Sizer enables powder processors to make automated measurements close to process line. Unit is based on Insitec Voyager, which is a self-contained, plug-and-play device that can be moved around plant for use on different process lines or to sample at various points in same line. Operated manually or automatically, pneumatic dry dispersion unit provides sample presentation and can be interfaced with existing sampling systems at user's site.

FilterSense    Beverly, MA 01915
Jun 01, 2005 With no orifices or thermal elements to clog, AF 100 Series measures air flow/velocity in high-particulate processes and stacks. Abrasion-proof probes are available for pipes and ducts, while non-intrusive ring sensors are available for tubing. Combining time-of-flight/cross correlation principle with charge induction and current measurement techniques, monitors are suited for process pipes, injection lines, dryers, cyclones, precipitators, and baghouses.

Beckman Coulter, Inc.    Fullerton, CA 92834-3100
Jun 01, 2005 Access Fast hTSH assay enables laboratories to quantitatively determine levels of thyroid stimulating hormone in serum and plasma. It requires 55 µl of sample and delivers results in 20 min. Analytical sensitivity is less than 0.01 µIU/mL and functional sensitivity is less than or equal to 0.03 µIU/mL. Access® Free T3 assay quantitatively determines level of free triiodothyronine levels in serum and plasma with analytical sensitivity of 0.88 pg/mL.

Quest Technologies Inc.    Oconomowoc, WI 53066 4828
Jun 01, 2005 SoundPatrol DP Series enables field testing of noise levels and documentation of measurement results in order to support citations. Equipped with portable, digital printer, sound level meters let users perform pre-test field calibration, take valid noise sample, perform post-test calibration check, and generate complete printed results.

Altera Corp.    San Jose, CA 95134-1941
Jun 01, 2005 Based on Cycloneâ„¢ II FPGAs, development kits facilitate prototyping of Nios® II embedded processor, DSP, and PCI designs. Each kit includes Cyclone II development board, CD with documentation and reference designs, and power supply as well as necessary cables, Quartus® II design software, and suite of interface IP cores. Nios II Development Kit provides everything needed for system-on-a-programmable-chip development.

Sakor Technologies, Inc.    Okemos, MI 48864-3547
Jun 01, 2005 DynoLAB LT provides fixed I/O configuration, test control, and DAQ capabilities required for basic electric motor testing. Along with provisions for measuring speed and torque, turn-key system can also determine voltage and current supply to motor under test. It works with Accudyneâ„¢ line of AC motoring dynamometers, which offer full 4-quadrant operation with seamless transition between loading and motoring modes.

Agilent Technologies, Inc.    Santa Clara, CA 95051
May 31, 2005 Wireless connectivity test set, Model N4010A, with Bluetooth(TM) Enhanced Data Rate Option 105, allows engineers to test Bluetooth connectivity during development, integration, and manufacturing of chipsets, modules, and devices. Key transmitter measurements include carrier frequency stability, modulation accuracy, and relative transmitter power. Receiver measurements include EDR sensitivity, EDR BER floor performance, and EDR maximum input level.

Scientific Technologies Inc.    Fremont, CA 94555
May 31, 2005 Equipped with power supply and removable terminal blocks, RM-2AC serves as central point for terminating all signals to and from solid-state safety device. It converts solid-state outputs to force-guided relay outputs. One NO and one NO/NC safety relay output rated at 250 Vac, 6 A can be used as primary switching device or to switch contactor. With 100–240 Vac input, module can monitor switching function of final switching device through MPCE monitoring circuit.

SBS Technologies, Inc. Industrial Computers    Carlsbad, CA 92008
May 31, 2005 COTS-based Model PIO-PMC1 combines multiple I/O functions on one PMC capable of meeting multiple functions within single slot. Conduction-cooled card can withstand environments where extreme shock, vibration, and temperatures are present. Through FPGA, unit can be configured with several different serial and discrete options. Up to 8 serial RS-422/485 RX/TX pairs, 16 analog TTL inputs and outputs, and 16 discrete inputs are available for programming.

Pentek Inc.    Upper Saddle River, NJ 07458
May 31, 2005 Capable of single- or 2-channel data acquisition, Model 6826 VME A/D converter board utilizes 10-bit Atmel AT84AS008 ADCs and configurable Xilinx Virtex-II Pro FPGA with 11 million gates. It accepts single-ended or differential inputs and digitizes signal bandwidths to 900 MHz. Along with two 64-bit DDR SDRAMs that provide up to 1 Gb of memory, unit features 16 Mb Flash memory, multiple I/O channels, FPDP-II data ports, and serial switched-fabric VXS connections.

UV Process Supply, Inc.    Chicago, IL 60614-4805
May 27, 2005 X-Rite 528 combines capabilities of densitometer and colorimeter into single unit. On 4-color jobs, it provides density, dot gain, trap, print contrast, gray balance, and hue error functions. Users can switch on-the-fly to colorimetry functions when quality control for pastels, Hi-Fi, and PANTONE® is needed. Users can measure up to 24 references and select type of comparison for each. Instrument automatically compares sample reading to closest reference and displays results.

Electrophysics Corp.    Fairfield, NJ 07004
May 27, 2005 HotShot® IR imaging camera features integrated data logger functionality and icon-based user interface. Articulating thermal camera head enables framing of electrical and mechanical systems from floor level to overhead. Unit integrates microbolometer IR sensor and is offered with wide angle and telephoto optics. Rated for temperatures from –20 to +350°C, joystick controlled produce has 3.5 in. LCD touch-screen, Compact Flashâ„¢ accessory port, and USB port.

Rockwell Automation    Milwaukee, WI 53204
May 27, 2005 Suited for industries with ATEX Zone 0 Group II requirements, Entek Enpac Ex collects data and monitors condition from mechanical equipment operating in Class 1 Div. 1 environments. Windows CE-based, 2-channel data collectors and signal analyzers employ analog and digital electronics, including DSP and Sigma-Delta ADC, to help ensure safe condition monitoring of equipment found in process industries with rotating equipment.

Neutronics, Inc.    Exton, PA 19341 2541
May 26, 2005 Suited for both R134A and R12 systems, QuickDetect A/C Sealant Detection Kit includes A/C coupler, hose, test cartridge, and flow meter. When connected to mobile A/C system, it mimics A/C leak. If sealant is present in system, it will quickly solidify in disposable test cartridge and cause flow meter to show no-flow. Except for test cartridges, all Quick Detect components are reusable. Additional cartridges are available separately.

UV Process Supply, Inc.    Chicago, IL 60614-4805
May 26, 2005 Measuring ¼ in. thick, CON-TROL-CURE UV-MICROLOG Dâ„¢ data-logging radiometer incorporates microprocessor that measures UV intensity (mW/cm²), UV dose (mJ/cm²), and temperature. Measurements can be viewed as numerical results on 2-line 16-digit display, or graphically after download to computer via USB link. Along with DAQ software, unit features 230–400 nm spectral range, 0–5,000 mW/cm² max power input, 30 sec measuring period, and 0.005 sec sampling rate.

UV Process Supply, Inc.    Chicago, IL 60614-4805
May 26, 2005 CON-TROL-CURE MICRO PUCKâ„¢ enables UV measurement in difficult-to-access environments. Available in UV-A, UV-B, UV-C, or full UV measuring ranges, system consists of UV sensor and hand-held base unit with display. MICRO PUCK MULTI accommodates up to 8 different sensors that read from same base unit, enabling full spectrum, 3D UV evaluation. Sensors are available as rectangular or round. Display range is 0–1,999 mJ/cm², standard, or 0–19,990 mJ/cm², x10 type.

UV Process Supply, Inc.    Chicago, IL 60614-4805
May 26, 2005 Hand-held UV-Profiler-3000™ measures UV from 250–410 nm, has color viewing screen, and comes with one UV sensor and one temperature sensor. UV-T Profiler series has no onboard viewing screen, but is offered in 4 UV ranges that collectively cover 230–410 nm. Equipped with 3 UV sensors, UV-3C can simultaneously measure UV-A, UV-B, UV-C, and full UV. Model UV-3C-T Profiler radiometer offers ability to measure temperature.

UV Process Supply, Inc.    Chicago, IL 60614-4805
May 26, 2005 Diskureâ„¢ 4Scan Radiometers are equipped with 3 UV sensors for individual measuring of UV-A/B/C and total UV. Ability to measure and display UV intensity and UV dose lets users determine total energy and how that energy is delivered. Models include base model, Diskure 4Scan (M007-111); Diskure 4Scan-C, which adds USB port; Diskure 4Scan-T (M007-113), which adds temperature sensor; and Diskure 4Scan-TC (M007-114), which adds USB port and temperature sensor.