Connect, Inc.    Naperville, IL 60540
Dec 12, 2005 Providing full touch-screen support, built-in license manager, and setup wizards, PowerNet Twin Client V-8 is designed for portable wireless terminal users and incorporates DBCS support for VT and 5250 emulations. Fully configurable product offers device management suite of products, which includes Find and Identify, Terminal Messenger, Screen Watcher, and Screen Formatter. Product also provides emulation keypad, scan trigger, and session management.

Samtec, Inc.    New Albany, IN 47151 1147
Dec 12, 2005 Using threaded inserts to secure connectors to boards, One Piece Interfaces include dual row units on .0394 in. pitch with board spacings of .118, .236, and .394 in. and up to 50 pins/row. For low profile applications on .0394 in. pitch, board spacings of .025, .050, and .065 in. are offered with up to 30 contacts in single row. Systems on .100 in. pitch include 1-piece power interfaces with .118 in. profile and up to 10 contacts, and signal interconnects with .150 in. profile and up to 30 contacts.

SMA Technologie AG    Niestetal 34266  Germany
Dec 09, 2005 Designed to adjust serial interfaces on SMA modules, RS232 Piggyback Model 422S4B-G1 allows point-to-point connection over distance of 1.2 km. By using piggyback, interface signals TxD, RxD, RTS, and CTS of serial interface module are converted and electrically separated into differential RS422 levels. Receive lines of RS422 interface are terminated with 120 Ω on piggyback and equipped with 680 Ω bias resistors to apply greater than 200 mV voltage level.

UV Process Supply, Inc.    Chicago, IL 60614-4805
Dec 09, 2005 Featuring nominal sensitivity of 3.0 µV/BTU/ft²-hr, TFC-9000(TM) Thin Film Calorimeter quantitatively measures curability of inks, coatings, and adhesives. Pushbutton-initiated process measures exothermic heat reaction from polymerizing sample and analyzes incoming data. Test measures shelf life of stored inks and evaluates older inks to determine if they still perform to requirements. Upon test completion, stand-alone unit displays key measured test results in LCDs.

MadgeTech    Warner, NH 03278
Dec 09, 2005 Featuring 2 in. temperature probe and nonvolatile memory, waterproof HiTemp 150 Temperature Recorder operates from -40°C to +150°C at 0 to 100% RH with <1 min response time. Unit can be set for 1 reading every 2 sec to 1 every 12 hr. Stainless steel base provides stability for placement in autoclaves, ovens, and dishwashers. Software allows data import to Excel®, customizing of engineering units, real-time recording and alarming, and overlaying graphs.

Advanced Thermal Solutions Inc.    Norwood, MA 02062
Dec 09, 2005 Designed to characterize thermal conditions in electronic systems, Model MS 1000-CS-WC provides temperature measurements from -30 to +150°C, ±1°C and velocity measurements from 0-51 m/s, ±2%. Unit features 9.5 mm diameter base and comes in heights of 9, 12, and 20 mm. Narrow, low-profile design minimizes disturbance of heat flow in test domain, while plastic-sleeved stem facilitates installation and repositioning during testing process.

HBM, Inc.    Marlborough, MA 01752 3014
Dec 08, 2005 Featuring one-piece, steel construction, P2V series includes 6 models with pressure ranges from 200-5,000 bar and accuracy class of 0.2. Monolithic measuring body eliminates welded seams and clamped connections connecting to measurement medium. All units incorporate low-noise amplifier as well as TEDS transducer identification, and higher measuring ranges are intended for applications such as internal high-pressure forming and water jet cutting.

Red Lion Controls    York, PA 17406 9428
Dec 08, 2005 Programmed to function as dual counter or as counter with rate indication, Model CUB5 features programmable decimal point and scaling for both count and rate displays along with input programming to accept bi-directional or quadrature signals. Timer Model CUB5T can be programmed to function as elapsed timer or as preset timer. It offers 8 input operating modes and 18 selectable timer ranges, bi-directional timing capability, and built-in cycle counter.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Dec 08, 2005 Series LPI accepts 4-20 mA input signal and displays associated process variable such as pressure, flow, temperature, level, or RH. Equipped with red, 4-digit LED for local or remote indication, instrument configuration can be modified via 3 push buttons. Users can program I/O scaling, engineering units, offset, resolution, and password protection. Linearizations that can be applied to display include straight, square root, X 3/2, X 5/2, or user-defined curve.

Universal Flow Monitors, Inc.    Hazel Park, MI 48030
Dec 08, 2005 Suited for measurement of non-aggressive gases, FlowStream® OFM Mass Flowmeters read full-scale flow rates from .5 scm to 1,000 slpm and accommodate pressures to 125 psi. Units can be programmed for measurement of air, argon, carbon dioxide, helium, hydrogen, methane, nitrogen, or oxygen. They offer standard response time of 50 ms, with 5 ms selectable option. Totalizing capability enables meter to measure, monitor, and control total amount of gas used in process.

Invensys Systems, Inc.    Foxboro, MA 02035
Dec 08, 2005 Available with Modbus digital communications for remote monitoring, configuration, and calibration, Model IMV25 combines static pressure, differential pressure, and temperature measurements. Transmitter uses PCMM configurator software for setup and communicates with host processors using Modbus RTU mode through 2-wire RS-285 multidrop serial connection. Unit is configurable for DP spans up to 840 in. H₂O and AP spans as high as 5,300 psi.

Leica Geosystems Inc.    Norcross, GA 30092
Dec 07, 2005 Featuring common user interface and software routines, Builder Series includes scalable solutions that withstand wind, weather, and dirt. Basic Builder T performs horizontal angle measurements or plumbing, while Builder R incorporates all Builder T features and adds red visible laser electronic distance-measuring device with 250 m range. Builder RM contains all abilities of Builder R and lets user call up construction data, save measurements, and transfer data to PC.

Endress + Hauser Inc.    Greenwood, IN 46143
Dec 07, 2005 Providing automatic identification of signal type on connection, digital Eco-Graph T features internal memory of 1,036,800 values and compact flash external memory. Data storage is possible with 512 MB card, and data can be transferred without software through CSV format, which allows for direct opening in ASCII or spreadsheet. Offering 100 ms scan rate, recorder includes USB port, Ethernet, RS485/RS232, and embedded web server for remote monitoring from anywhere.

Omega Engineering, Inc.    Stamford, CT 06907
Dec 07, 2005 Compatible with any subminiature type K thermocouple, HH11A and HH12A digital thermometers offer -58 to 1,999°F operating temperature range. Single-input HH11A has user-selectable resolution of 0.1 or 1°, while dual-input HH12A lets user display T1, T2, or Delta T readings with 0.1 or 1° resolution. Other features include and 3½ digit LCD display with maximum reading, display hold, and offset adjustment on front panel.

Alliance Scale Inc.    Canton, MA 02021
Dec 06, 2005 Incorporating 4-12 load cells, Alliance Truck Scale features modular Survivor EZ® Steel Deck, which consists of 3/16 in. steel plate supported by 12 in. high beams. Offered in lengths from 10-117 ft and widths from 10-14 ft, scale has 90,000 lb concentrated load rating. It includes asphalt coating applied to interior and under-side, epoxy primer, and hard coat alkyd enamel finish. Digital weight indicators and displays are available to meet customer requirements.

Texas Instruments, Inc., Semiconductors    Dallas, TX 75243
Dec 06, 2005 Available in MSOP-8 micro-package, XTR117 offers over-scale and noise-resistant signaling with 250 µA max power consumption. Product has operating voltage from 7.5-40 V and is tolerant of power surges to 50 V. I_out/I_in transfer function of x100 can be created for voltage output sensor conditioning circuits. Along with 4-20 mA output scaling, transmitter offers 3.75 mA @ 5 V (sub-regulated) available for external sensor conditioning circuitry power.

Pico Technology Ltd    St Neots Cambridge PE19 1QB  United Kingdom
Dec 06, 2005 With up to 24-bit resolution, Models ADC-20 and ADC-24 measure and record voltage signals onto PC or laptop. USB port facilitates connection and installation, and eliminates need for external power supply. Model ADC-20 offers 4 differential channels, which can also be used as 8 single channels, while Model ADC-24 has 8 differential channels, which can be used as 16 single channels. Using PicoLog® software, loggers can sample 1 million readings at selectable sampling rates.

Electro Standards Laboratories    Cranston, RI 02921 3403
Dec 06, 2005 Built into load cell, extensometer, or pressure sensor to create smart cell, CellMite Model 4326A generates serial output for connection to PC and ±10 V analog output. TEDS-Tag Auto-ID's integrated electronic tags allow CellMite to select correct sensor calibration and analog output scaling for connected transducer. Along with 24-bit internal resolution, product offers internal temperature compensation, 60 samples/sec operation, and multi-drop RS232 serial port.

Mine Safety Appliances Company / Instrument Division    Pittsburgh, PA 15230
Dec 06, 2005 Designed to detect UV and/or IR radiation emitted by hydrocarbon-based fires and flames, FlameGard Detectors operate as stand-alone units or can be connected to fire or security system. They are enclosed in copper-free, explosion-proof aluminum housings and can be mounted with bracket or optional swivel mount kit. In dusty environments, optional air purge kit keeps viewing glass clear. Detectors are FM approved and include false alarm suppression.

Renishaw, Inc.    Hoffman Estates, IL 60192
Dec 05, 2005 Based around AM256 chip, solid-state rotary encoder kits are intended for brushless dc motor control. Products, available with absolute, incremental, and analog outputs, offer resolutions from 6- to 12-bit. Non-contact, no-wear units operate in continuous temperatures to 125°C and exhibit accuracy to ±0.3°. With axial length of 1/8 in. and diameters down to ¾ in., encoders operate at speeds to 60,000 rpm and handle motor stall, overload, and high shock and vibration conditions.