Agilent Technologies, Inc.    Santa Clara, CA 95051
Mar 20, 2006 Infiniium 80000B Series multi-gigahertz-bandwidth oscilloscope adapts CMOS ADC architecture for signal integrity. Low-noise oscilloscope features touch-screen, XGA resolution display, front-panel USB port, and CPU system for display and measurement execution. Unit incorporates MegaZoom technology with 256 levels of intensity grading to identify waveform anomalies. When used with InfiniiMax probing system, it offers probe facility. Infiniium application software is available for 80000B Series.

Thermo Electron Corporation / Molecular Spectroscopy    Madison, WI 53711-4495
Mar 17, 2006 Featuring common platform, Antaris II, MX, and EX are suited for method development, raw materials analysis, batch reaction monitoring, on- and off-line moisture analysis, real-time blend uniformity analysis, and tablet analysis. All offer choice of software packages, including RESULT(TM), featuring corrections for transferring data across sampling techniques and fiber optics; OMNIC(TM) with spectroscopic analysis tools; and Unscrambler® from CAMO for chemometric modeling and method development.

Sakor Technologies, Inc.    Okemos, MI 48864-3547
Mar 17, 2006 Compatible with engine, powertrain, hybrid vehicle, and electric motor testing applications, Accudyne(TM) AC Motoring Dynamometers are available in sizes from fractional to 2,000+ hp with speeds over 30,000 rpm. Vector drive technology enables true 4-quadrant capability, with completely seamless crossover between motoring and loading modes. In addition to NVH testing, products offer features such as target device inertia and engine simulation.

Omega Engineering, Inc.    Stamford, CT 06907
Mar 17, 2006 Factory-calibrated for direct-acting operation, Series IP211/EP211 decreases supply pressure, converting it to regulated output pressure in direct proportion to electrical input signal. Units accept supply pressures from 3 psig above max output to 100 psig. Integral pneumatic volume booster provides flow capacity up to 12 scfm. Series incorporates general purpose, FM intrinsically safe, and CSA intrinsically safe models, all of which mount at any angle.

Nanion Technologies GmbH    Munchen   Germany
Mar 17, 2006 Robotic multi-channel patch clamp workstation NPC©-16 patchliner© uses microstructured glass chips and employs microfluidics to enable perfusion. Success rates of 60-80% are achieved in gigaseal formation and stable whole cell recording. It allows application of compounds in laminar flow channels and also enables intracellular perfusion to make both sides of cell membrane accessible by pipetting robotics.

RKC Instrument    South Bend, IN 46628
Mar 16, 2006 With universal K, J, and RTD input, Model DP-700 offers data logging function that allows user to store up to 99 tag numbers in addition to providing date, time, user's name, and measured temperature. Data can be stored in thermometer or downloaded to PC via USB port. Display shows remaining battery life and indicates if sensor fails. Applications include food handling and packaging, monitoring transformer temperature, semiconductor, test stands, and environmental chambers.

Krohne, Inc.    Peabody, MA 01960-3803
Mar 16, 2006 Featuring single straight-tube design resistant to blocking and fouling, OPTIMASS Series 7000 is approved for use in hazardous environments and complies with requirements of ASME Bioprocessing equipment, EHEDG, 3-A, and FDA. Coriolis mass flowmeter is offered with 7 full-bore tube diameters from ¼-3 in. and wetted parts in titanium, stainless steel, or Hastelloy®. Adaptive Sensor Technology enables intelligent self-tuning, independent of external forces and fluid density.

ExxonMobil Coal & Minerals Co.    Houston, TX 77063 2005
Mar 16, 2006 Available via Internet at www.exxonmobil.com/signum, Signum Oil Analysis Program enables users to manage oil and lubrication analysis needs at anytime, from anywhere. Users can manage equipment registrations and select analysis options, track status of samples at lab, manage actions based on analysis results, request sample kits, and share critical results with colleagues and ExxonMobil technical experts in secure, password-protected environment.

Lexmark International, Inc.    Lexington, KY 40550
Mar 16, 2006 Featuring 1,200 dpi printing speed of 20 sec. to 2 min., Elesys DUET(TM) 400 enables recording of full-color text or image directly onto CD or DVD as it spins. Printer mechanism is positioned on top of drive. Unit features USB 2.0 interface and supports most Windows-compatible labeling and recording software. Ideal for use with music, photo and video kiosks, office data backup and storage, medical digital imaging, photography and videography applications.

JDSU    San Jose, CA 95131
Mar 16, 2006 Model T-BERD/MTS-8000 helps provision and maintain short-haul, long-haul, FTTx, Metro, CWDM, transport, data, and DWDM networks. Designed to help carriers deliver data services, its Transport module provides integrated solution for Ethernet, SONET, SDH, PDH, and T-carrier networks. It incorporates 3 test processes without disengaging from fiber being analyzed and provides independent visibility into network configurations at wavelength and data services level.

KLA-Tencor Corp.    San Jose, CA 95134
Mar 16, 2006 STARlight-2(TM) provides wafer fabs with contamination inspection solution for all types of photomasks, including mainstream extreme resolution enhancement technique photomasks. With inspection capabilities designed for detection of progressive defects, product features 90 and 125 nm pixel sizes that provide resolution and sensitivity needed to detect mask contaminants on device layers with smallest pattern features before they affect process window or print on wafer.

Tektronix, Inc.    Beaverton, OR 97077
Mar 16, 2006 Digital Phosphor Oscilloscopes, Series DPO4000, offers Wave Inspector(TM) tools for discovery and viewing, navigating, and analyzing waveform data. Two-tier front panel knob provides intuitive control of zooming and panning, while play/pause feature with adjustable speed allows user to scroll waveform across screen while looking for event of interest. Units provide serial triggering, protocol decode, USB plug-and-play PC connectivity, 10.4 in. XGA display, and 10 M memory.

Doran Scales Inc.    Batavia, IL 60510 1460
Mar 15, 2006 Offering max capacities from 2-1,000 lb, Model 7400 is available in base sizes from 10 x 10 in. to 24 x 24 in. Unit provides 1-button operation, zero band checkweighing, and color-coded over-under-accept indicators. Gasket design and 4-screw case, stainless steel Zero/Set Target function button, and impenetrable Lexan(TM) display lens protects electronics in indicator housing. Quad-spring design protects load cell from damage from up to 10 times scale capacity.

Mitutoyo America Corp.    Aurora, IL 60504 9176
Mar 15, 2006 Measuring 1.38 in. wide, Digimatic ID-N Slim Type and ID-B Back Plunger Indicators are dust-proof, chip-proof, coolant-proof and virtually immune to conditions found on production floor. Reversible LCD displays enable flexibible orientation for reading multiple measurements. Absolute® sensor eliminates troublesome origin set during multipoint measurements. Flat sides enable multiple units to be installed side-by-side.

Astro-Med, Inc.    West Warwick, RI 02893
Mar 15, 2006 Engineered for capturing high-frequency data and transient signals, Dash 8HF supports recording up to 8 channels of isolated inputs to internal 250 GB hard drive at sample rates to 2 MHz with bandwidth of 200 kHz/channel. Portable unit measures 16 x 12.125 x 6.628 in. and features 15 in. diagonal monitor with GUI for touch-screen control as well as real-time data viewing and analysis. Other features include DVD burner, 10/100/1000BaseT Ethernet, USB 2.0 port, and AstroVIEW X software.

Envirosight LLC, Video Pipeline Inspection    Randolph, NJ 07869
Mar 15, 2006 Modular, steerable ROVVER® Crawlers feature zooming pan/tilt camera head that combines 10X optical zoom and 4X digital zoom. Camera head provides shadow-less illumination of targets, captures color video, and can project 2 laser dots 1.575 in. apart onto targets in camera's field of view, providing measurement reference. Machined from aluminum, handheld splash-proof pendant grants fingertip control of crawler and camera functions. Wide wheel set optimizes traction in sediment.

Mitutoyo America Corp.    Aurora, IL 60504 9176
Mar 14, 2006 Legex 574 CNC Coordinate Measuring Machine features traverse speed of 200 mm/sec, worktable loading capacity of 200 kgf, and measuring range of X:510, Y:710, and Z:455 mm. MCOSMOS software supports CAD formats and provides routines for in-line measurement, data feedback, and process management. Probes supported include contacting scanning, touch-trigger, laser, and vision. Chassis is made of spheroidal graphite cast iron with air-damped spring isolators to attenuate vibration.

Mitutoyo America Corp.    Aurora, IL 60504 9176
Mar 14, 2006 With all basic control functions operated via 3-switch routine, ID-H Digimatic Indicators provide measuring range up to 2.4 in. with .000006 in. accuracy at 1.2 in. range and 1.5 µm at 30 mm range. Units feature extra large display with 3/8 in. character height, .00002 in./0.5 µm resolution, and RS-232C PC connectivity, which enables external control of every indicator function. Indicators are capable of remote control via infrared remote controller.

B & R Industrial Automation Corp.    Roswell, GA 30076
Mar 14, 2006 IP20 Compact I/O modules of size 6.7 x 3.2 x 1.2 in. are mountable directly on machine or on DIN rail. Units collect discrete I/O signals and transfer to controller over fieldbus. Modules include signal adaptation and handle digital signals, rotational encoder evaluation, gate measurement, event counters, or pulse width modulation. Analog modules come with temperature inputs, strain gauge evaluation, or resistance measurement. Systems are equipped with CAN I/O interfaces or X2X Link.

Automation Systems Interconnect Inc.    Mechanicsburg, PA 17055
Mar 14, 2006 Available in both RJ-11 and RJ-45 types, jack-style Model IMRJ provides means of interfacing between various types of equipment that use Ethernet/RJ type connections and individual wiring. It features modular DIN rail base with clearly ink-marked terminal blocks. Special sizes, circuits, and custom labels are available.