Remcom    State College, PA 16801
Jan 19, 2010 Available in 64-bit version, Wireless InSite® site-specific radio propagation software aids in wireless communication system analysis and design. It provides predictions of propagation and communication channel characteristics in complex urban, indoor, rural, and mixed path environments. Featuring Full 3D Ray Model and Real-Time APIs, solution helps RF engineers design wireless communications links, optimize antenna coverage, and assess jammer effectiveness.

National Instruments Corp.    Austin, TX 78759-3504
Jan 18, 2010 LabVIEW Robotics 2009 provides standard development platform for designing robotic and autonomous control systems. Specifically, this graphical system design software offers robotics library with connectivity to standard robotic sensors and actuators, foundational algorithms for intelligent operations, as well as perception and motion functions. Integration with various processing platforms, third-party software tools, and prebuilt robot platforms optimizes flexibility.

National Instruments Corp.    Austin, TX 78759-3504
Jan 18, 2010 Based on PXI Express instrumentation powered by multicore technology, NI Measurement Suite for Mobile WiMAX can perform error vector magnitude, power, and spectral measurements. Software supports channel bandwidths from 1.25-28 MHz and FFT sizes 128, 256, 1024, and 2048, as well as all Mobile WiMAX modulation types with both convolution coding and turbo convolution coding. Software can also generate or analyze signals with up to 8 zones and 16 bursts.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Jan 12, 2010 Running on N5106A PXB Baseband Generator and Channel Emulator platform with E4438C ESG or N5182A MXG Vector Signal Generator for RF upconversion, Agilent N7609B Signal Studio can create real-time, multi-satellite (up to 12) GPS signals and perform tests required for GPS receiver verification/validation. Custom scenarios can be created with stationary/moving GPS receiver featuring up to 24 channels of line-of-sight and multi-path satellite signals. Impairments can also be included.

Ruckus Wireless    Mountain View, CA 94043
Jan 07, 2010 Available to Open Source Community, Zap Software measures and reports critical wireless throughput variations. Program tests sustained throughput of wireless network to determine true, sustained, and worst-case performance. Statistical analysis anticipates performance of wireless network by predicting percent of time and locations at which performance will be above or below certain limit. Using Zap, organizers can also predict real-life performance of system before deployment.

Graywolf Sensing Solutions    Shelton, CT 06484
Jan 07, 2010 WolfSense® 2010, in conjunction with GrayWolf sensors, transforms Windows XP/VISTA/7 notebook PCs and Windows Mobile Pocket PCs into air quality measurement instruments. Program provides real-time display of trend graphs during data logging; unlimited, appended audio notes; color drawing notes; and auto-attachment to data files or video taken in-situ. Auto-start logging feature initiates trend logs at pre-assigned time and date.

Wind River Systems, Inc.    Alameda, CA 94501
Jan 07, 2010 As commercial version of open consortia-based software, Wind River Platform for Android can streamline process for those wanting to build Android-based devices and test them for market readiness. Offering includes open source Android code, pre-integrated third-party software (such as Flash® and OpenCORE(TM)), as well as Android UI and personalization options for common branding functions. Product is optimized for TI's OMAP(TM) 3 platform.

CADDIT.net CAD CAM Software    Liverpool   Australia
Jan 06, 2010 Compatible with AutoCAD LT, progeCAD Professional 2009 DWG CAD v9.0.28.10 enables 2D and 3D CAD drawing using common AutoCAD and AutoCAD LT commands including print view layout and one-click text editing. Program provides raster image editing, 3D shading and rendering, dimensioning, and raster-to-vector function, as well as optimized block data extraction, hatch, and xref editing. It is suited for architects, kitchen and bath designers, and civil, electrical, and structural engineers.

Automation Anywhere    San Jose, CA 95154-4073
Jan 05, 2010 Using Testing Anywhere, developers can test applications, websites, objects, controls, and GUI front-ends in any language using single tool. Test to .EXE allows for remote testing on any machine, anywhere as executable file. Automated Visualization provides screenshot of every step of automated process, allowing for storyboard view of entire test and ability to capture images on-demand. With integrated collaboration, users can share test scripts and reports across multiple groups.

VizUp Technology    Vancouver V6R 2H9  Canada
Jan 04, 2010 VizUp v3.5.5 Ultimate simplifies large 3D models that have been converted from CAD/CAM/CAE. Program can automatically choose parameters suitable for individual models to retain relevant reduction information. Process of file optimization results in deletion of some vertices, but does not change coordinates of remaining ones, resulting in minimal distortions during texture mapping. Software runs under Windows 98/Me/NT/2000/XP/2003/Vista.

LeCroy Corp.    Chestnut Ridge, NY 10977
Dec 29, 2009 Built on Voyager protocol verification platform, Compliance Test Suite for USB 3.0 provides automated, turnkey test application that allows device vendors to begin pre-testing SuperSpeed USB designs in advance of industry's certification program. Software addresses Command Layer and Link Layer compliance verification, including Chapter 9 framework tests for USB 2.0 and 3.0 devices. Console steps through test process and generates pass/fail reports identifying possible violations.

EMC Corp.    Hopkinton, MA 01748-9103
Dec 28, 2009 Able to meet various organizations' unique needs, InputAccel® CaptureFlow(TM) Designer lets users create and configure capture processes without any coding. Graphical design tool provides drag-and-drop development environment for building document capture processes within hours, and intelligent capture solution also accelerates deployment by requiring minimal maintenance resources. Functionality also enables accelerated delivery of custom demonstration and proof of concept examples.

LeCroy Corp.    Chestnut Ridge, NY 10977
Dec 28, 2009 As physical layer transmitter compliance test application for SAS-2, QualiPHY SAS-2 provides automated control for SDA 8 Zi series of oscilloscopes to test SAS initiators and targets running at 1.5, 3.0, and 6.0 Gbps. It performs all transmitter physical layer tests in accordance with UNH IOL SAS Consortium SAS-2 6 Gbps Physical Layer Test Suite from Group 1/2/3 and also enables debug for SAS-2 signals inside oscilloscope.

Delcam Plc    Birmingham Hampshir B10 0HJ  United Kingdom
Dec 24, 2009 PowerSHAPE CAD software and CopyCAD Pro reverse engineering program include Solid Doctor for repair of CAD models. Both programs incorporate Parasolid® software, which enables repair application to read in and repair models from all sources, including IGES and native CATIA files, and output aParasolid XT file that can be read into all software based on Parasolid. Repair component helps users tackle common problems when translating low precision and incomplete data.

Procedural Inc    Zurich   Switzerland
Dec 18, 2009 CityEngine v2009.3 software offers architects and designers optimized user interface, texturing, and roof modeling that supports all common roof types. It simplifies modification of procedural models and helps with layout of large 3D cities with few mouse clicks via CityWizard. Program includes 3D mouse support, navigation schemes, and sliders. Example resources range from ancient Pompeii to Sci-Fi city elements.

LEDAS Ltd.    Novosibirsk   Russian Federation
Dec 18, 2009 LGS 2D geometric constraint solver v3.0 includes support for NURBS curves and for equal curvature geometric constraints, which is useful for parametric drawing applications requiring smooth tangencies between curves. Developers can also define custom sets of memory management tools for controlling and optimizing memory use. Integration module allows use of program with applications based on DWGdirect of Open Design Alliance.

Geometric Americas, Inc. (formerly Geometric Software Solutions, Inc.)    Merrimack, NH 03054
Dec 18, 2009 Supported and integrated with PTC Pro/ENGINEER GRANITE® Interoperability Kernel, GeomCaliper® v2.4 facilitates measurement and checking of wall thickness of 3D CAD models. It accelerates design review process for manufacturability, enabling accelerated prototyping and production of designs, helping reduce overall design cycle time. Along with thickness analysis results for Pro/ENGINEER CAD models, features includes support for 32- and 64-bit Windows® Vista OS.

Dassault Systemes    Suresnes Cedex BP 310, 92156  France
Dec 17, 2009 Isight v4.0 provides open system for integrating design and simulation models into simulation process workflow. Resulting workflows can be used to run hundreds or thousands of simulations without manual intervention, and optimization methods allow engineers to explore complete design space to identify optimal performance parameters. Abaqus Unified FEA application component, provided as part of base Gateway package, enhances use of FEA technology within Isight process workflows.

Fortify Software, Inc    San Mateo, CA 94404
Dec 16, 2009 Delivered via Software-as-a-Service, Fortify on Demand integrates static analysis technology with dynamic application security testing powered by WhiteHat Security, allowing organizations to assess and remediate security vulnerabilities in internal and third party applications without installing software on-premise. Program continually detects, verifies, and prioritizes vulnerabilities at near-perfect levels of precision in both development and production phases of application lifecycle.

Olympus NDT    Waltham, MA 02453
Dec 15, 2009 TomoView(TM) v2.9 manages acquisition of UT (ultrasonic testing) signals along with real-time imaging of signals and offline analysis of previously acquired data files. In addition to moving detection gates in Analysis (off-line) mode, functionality allows DGS curves to be added to comply with forging inspection requirements. C-scan view is also available for linear and sectorial scans. Inspection reports can be generated in an HTML format for viewing in internet browser.