Hex-Rays sprl
Liège   Belgium
Sep 24, 2007 Available to analysts and programmers working in security and compliance sectors, plug-in module for IDA Pro disassembler facilitates analysis regarding assembler listing of binary by letting users work with higher level C-like pseudocode instead. HexRays reverse engineering tool supports 32-bit Intel x86 code, can act as troubleshooting tool, and helps analysts see logic flow in code.

Kellerman Software
Columbus, OH 43228
Sep 21, 2007 Helping users to increase code coverage of their applications as well as prevent future bugs, NUnit Test Generator automatically creates NUnit test stubs for VB.NET and C#. Template-based nature of application facilitates modification of test creation process. IN addition to test documentation creation, features include support for abbreviation expansion and expected value testing.

Data Translation, Inc.
Marlboro, MA 01752
Sep 19, 2007 Instrument Pak for Measure Foundry helps configure applications with LXI instrument abilities using IVI-COM drivers along with VISA and SCPI programs. It supports function generators, oscilloscopes, DMM, and programmable power supplies for ATE. Drag and drop graphical software enables users to create test and measurement applications, combining variety of instruments, without writing any code. Instrument applications can be used in process sequences with connections via Ethernet to any PC.

REAL Software, Inc.
Austin, TX 78746
Sep 18, 2007 Offered as software development environment suited for creating range of applications, REALbasic 2007 v4 supports Ubuntu v6.06 and later. ODBC plug-in is optimized for accelerated performance, and database API is optimized for accelerated performance when iterating through recordset using Field function. Also included, delegate datatype provides abstract representation of method. Debugger console applications include properties that simulate command line arguments.

Agilent Technologies, Inc.
Palo Alto, CA 94303
Sep 17, 2007 With WireScope Pro LAN Cable Tester and v2.5 software, users can ensure proper certification of structured cabling in presence of Power over Ethernet mid-span devices and ac-coupled patch-panels. Tester features frequency range up to 1 GHz and is capable of testing all common cable standards, even beyond ISO/IEC Class F limit of 600 MHz.

LogicVision, Inc.
San Jose, CA 95110
Sep 17, 2007 Running on Linux PC or laptop, Silicon Insight(TM) interfaces to device or performance board through USB-to-JTAG cable interface hardware to provide interactive graphical environment for characterization, debug, and diagnosis of silicon devices. Based on ETDiagnostics(TM), it works with Memory BIST, Logic BIST, PLL BIST, and SerDes BIST embedded test IP. Users can run full suite of embedded test algorithms and diagnose their designs down to failing memory cells or logic gates.

S2 Technologies
Cardiff, CA 92007
Sep 14, 2007 Designed for use by software engineers in development of cellular-handset software development kits (SDKs), STRIDE v2.1 enables handset provider to create, run, and deliver test cases as component of its SDK. This leverages domain expertise of handset developer and allows component provider to create reusable and automatable test scripts, or test assets, which can be used throughout development process. Embedded platform accelerates continuous integration, testing, and verification.

Agilent Technologies, Inc.
Palo Alto, CA 94303
Sep 14, 2007 Agilent N8300A Wireless Networking Test Set and OFDMA measurement application software provides complete one-box transmitter and receiver test solution for Mobile WiMAX devices. It is based on architecture that integrates Vector Signal Analysis and Vector Signal Generator hardware and features front panel GUI and SCPI command set. Measurement algorithms and software from WiMAX R&D test tools allows measurement traceability through product lifecycle.

Maplesoft
Waterloo, Ontario   Canada
Sep 14, 2007 DynaFlexPro v3.0 is a Maple(TM) package used to model and simulate the kinematics and dynamics of mechanical multibody systems. Project Manager guides users through model development via step-by-step instructions, buttons, and dialog boxes, while Equation Builder Assistant walks users through process of converting model description to kinematic and dynamic equations. Software also offers ability to select base coordinate system to which other system reference frames are mapped.

Flomerics Inc.
Marlborough, MA 01752
Sep 12, 2007 With ability to model potting compounds and probe temperature values interactively, FLO/PCB v4.1 makes it possible to perform board-level thermal simulation early in design process. Included SmartPart object can be used to represent epoxy type solid cured potting compounds, and bi-directional connectivity is maintained with Flotherm v7.1 system-level thermal modeling tool. Features include user-definable temperature ranges and component libraries search capability.

AVEVA
Cambridge CB3 0HB  United Kingdom
Sep 12, 2007 With interactive 3D graphical editing functions, PDMS v12 delivers engineering applications for designing equipment, piping, ducting, and structural steel. Access platforms allow parametric design and modification of complex access configurations, while cable design allows cables and cableways to be routed inside PDMS model. Object associations enable key relationships to be defined within plant model and continuously monitored as design progresses.

Opal-RT Technologies
Montreal, QC H3K 1G6  Canada
Sep 11, 2007 Combining RT-LAB(TM) technology with Intel® multi-core X86 processors and OP5000 series Xilinx®-based FPGA I/O products, eDRIVEsim(TM) provides real-time platform for designing advanced control systems and performing HIL testing of controllers. Solution uses Simulink® as front-end graphical modeling environment and can also be used for power electronic control prototyping. Included software tools and libraries facilitate real-time modeling and simulation of power converters/motor drives.

Kozio, Inc.
Longmont, CO 80501-7413
Sep 07, 2007 Designed for custom embedded controllers, RapidIO Validation IP provides automated diagnostics Platform to test and troubleshoot RapidIO devices and connections using processor-based configurations. Diagnostics testing includes verification of maintenance read/write transactions to all discovered devices. If specific RapidIO devices in switch fabric provide general purpose memory, many memory test methods can be used to verify other RapidIO transaction types.

Agilent Technologies, Inc
Santa Clara, CA 95051
Sep 07, 2007 Suited for engineers working in computer and data storage industries, U7231A DDR3 runs on Infiniium 54850 and 80000 Series oscilloscopes and provides DDR3 compliance measurements based on JEDEC JESD79-3 DDR3 SDRAM specifications. Debug mode offers critical measurements such as eye-diagram analysis, mask tests, ringing measurements, and other tests that are not covered in JEDEC specifications. It configures oscilloscope for each test and generates informative HTML report at end of test.

Agitar Software
Mountain View, CA 94041
Sep 05, 2007 AgitarOne v4.2 allows development teams to generate basic set of unit tests that provide 80% code coverage of java applications and to detect unwanted or unexpected changes in code behavior. Software features scalable, server-based architecture and includes software agitation(TM) to perform exploratory tests on Java code interactively. It also features code-rule enforcement, code-risk management dashboard, and continuous integration and test framework.

Adept Scientific plc
Letchworth, Hertfordshire SG6 1ZA  United Kingdom
Sep 04, 2007 DynaFlexPro v3.0 is used to model and simulate kinematics and dynamics of mechanical multibody systems. Combining graph theory with engineering mechanics in algorithms that generate equations from system model, it offers ability to select base coordinate system to which other system reference frames are mapped. Software also includes model development guide, equation builder assistant, and Project Manager interface that guides users through model development process.

GSA Bansemer & Scheel GbR
Rostock 18146  Germany
Sep 04, 2007 Including normalization of raw data, additional gene information, official gene names, location, function prediction, sequences, and database references, Genom 2005 v3.27 provides multiple analysis methods such as cluster, Support-Vector-Machine, and statistical methods. Windows compatible software also comes with integrated pathway editor, automatic pathway mapping, and sequence analysis functions.

Agilent Technologies, Inc.
Palo Alto, CA 94303
Aug 29, 2007 Agilent DisplayPort solution offers manual and automated DisplayPort physical layer compliance test capability in addition to features that assist in debugging and characterizing DisplayPort designs. Pre-certification testing kit includes Infiniium DSO80000 Series oscilloscopes, U7232A DisplayPort compliance test software, and W2641A DisplayPort test point access adaptor. It supports DisplayPort tests as specified in DisplayPort specification 1.1 as well as upcoming requirements.

Altair Engineering, Inc.
Troy, MI 48084
Aug 28, 2007 HyperCrash/CATIA, integrated into CATIA v5, offers crash workbench dedicated to automotive crash engineers. In addition to providing seamless interface for CATIA users, solution enables modeling of crash data and capability to include nonlinear material properties in dynamic database. Engineers can perform complete task inside CATIA environment and move directly into RADIOSS solver, minimizing cycle time between design and FEA while promoting geometry/crash model association.

CodeGear
Scotts Valley, CA 95066
Aug 23, 2007 Offered in Client and Server editions, JGear(TM) Performance for Eclipse, JGear LiveSource® for Eclipse, and JGear Team for Eclipse provide set of specialized plug-ins for Eclipse v3.2 open-source development platform. They help Java developers increase performance and productivity on Eclipse and open-source tooling by augmenting and accelerating open-source platform and tools in 3 areas: Java application performance, visual development, and team collaboration.