Programming Languages

Software, Services

CAD/CAM Programming and Nesting Software streamlines workflow.

April 21, 2014

Optimized for plasma, oxy-fuel, laser, and waterjet cutting, Columbus III™ v1.2 delivers features that facilitate programming while improving efficiency, material utilization, and productivity. Standard shape library offers pre-defined part geometries, and parts can be imported from existing assembly without requiring customized import filters. Along with automatic remnant cut geometry optimization, features include optimized cutting technologies via 3 bridge configurations. Read More


LTE Protocol Stack targets small cell relay node backhaul.

February 27, 2014

Designed for integration of relay node backhaul functionality with existing eNodeB solution, ALPS 521 provides interfaces to eNB network protocols via NextG-Com IPC framework, and is pre-integrated with eNB RN interfaces to scheduler and eNB controller entities. Release 11-compliant UE protocol stack is future-proof to support RN Layer 1 interfaces through adaptation layer, which supports both in-band without isolation and out-band/in-band with isolation RF architecture. Read More


LTE UE Protocol Stack addresses M2M industry challenges.

February 18, 2014

Flexible and scalable, ALPS-Lite Category 0-ready LTE protocol stack is designed for low-bandwidth, low-power M2M platforms with reduced mobility requirements and infrequent small burst data. Customizable protocol stack solution features modular architecture and is available with ASN.1 data stack and ultra lightweight SE-RTOS. Fully validated against 3GPP conformance test suite, solution is powered with defined and customizable abstraction layer towards underlying platform, RTOS, and PHY. Read More


LTE Protocol Stack targets M2M and special applications.

January 27, 2014

Compliant to 3GPP Release 11, ALPS 520 customizable LTE modem stack offers modular architecture and well-defined interfaces targeting such markets and applications as machine-to-machine (M2M) devices, LTE backhaul, relay nodes, routers, and gateways. Included tools — Trace, ASN.1, SE-RTOS™ — help accelerate product development and reduce third party licensing expense. This non-captive, independent, and flexible solution also includes customizable L1 adaptation layer APIs. Read More


Protocol Stack and SDK enhance Rezence charge pad capabilities.

December 30, 2013

Together, S120 (8-link central protocol stack) and nRF51 Wireless Charging SDK provide solution for OOB signaling part of Rezence™ charge pad. Support for 8-link concurrent link enables charge pad based on nRF51822/S120 to support simultaneous charging of up to 8 devices. S120 SoftDevice includes Bluetooth® low energy protocol layers and supports multi-link central and observer roles; GATT server and client; and event driven, asynchronous, and thread safe GATT/GAP and L2CAP APIs. Read More


Programming Language supports Smart Printing capabilities.

August 14, 2013

Providing Smart Printing capabilities for Intermec’s PM43/c industrial printers and PC-Series desktop printers, Intermec C# for Printers eliminates need for attached computer, keyboard, or other cabling elements in many industrial, retail, and distribution center applications. Programming language will help optimize operations while virtually eliminating labeling errors. Read More


NC Programming Software offers option for turbo machinery.

June 19, 2013

Designed to optimize efficiency of part programming and machine run time, GibbsCAM 2013 includes 5-Axis MultiBlade option, which targets machining of turbo machinery parts, and simplifies programming of impellers, blisks, and blings. Five-Axis Porting option provides specialized functionality for machining of hollow shapes that have significantly different shapes or sizes at each open end, or have significant amount of curvature from one end to the other. Read More


Graphical Programming Environment accelerates time to market.

April 26, 2013

Incorporating electronic flow sharing features and intelligent engine speed control, PLUS+1™ GUIDE (Graphical User Integrated Development Environment) v6.1 supports PLC programming language Structured Text – part of IEC 61131-3 standard. PLUS+1 GUIDE Work Function Control Library, optional, contains pre-programmed software blocks essential to development of electronically controlled work functions for off-highway machines, conserving time and expenditure during development and testing. Read More


Programming Software supports remote terminal units.

December 11, 2012

Providing menu-driven environment for programming in IEC 61131-3 Ladder Diagram as well as function blocks and Basic, TWinSoft Suite v11 allows users to configure IP/web/telemetry technology platform in TBox RTU products. Technology features integral web server and push technology via email, FTP, and SMS text messaging. With included WebForm Studio 2.0, users can build live process displays that are compatible across all web-enabled devices including smart phones, tablets, and PCs.
  Read More


NVMe Verification IP connects SSDs to PCIe.

April 3, 2012

With its command set, queuing layer, and register interface, verification IP (VIP) for Non-Volatile Memory Express (NVMe) provides storage protocol for connecting SSDs directly to PCIe® interface. This NVMe verification IP, which consists of upper-level protocol layer that can be integrated with ExpertIO PCIe verification IP, enables early NVMe adopters to use emerging protocol to better meet aggressive time-to-market windows. Read More


Communications Security Software protects TCP/IP traffic.

October 5, 2011

NetX(TM) Duo with IPsec support (NetX/IPsec) features TCP/IP IPv4/IPv6 dual stack, enabling encryption and authentication of each packet during network communication sessions. While solution establishes mutual authentication between sender and receiver at beginning of session and negotiates cryptographic keys to be used during session, implementation of IKEv2 protocol enables negotiation of security parameters and exchange of encryption keys without human intervention. Read More


Robot Control Protocol enables control from PC, PLC, or smartphone.

August 1, 2011

Eliminating need to learn robot programming language, b-CAP binary control access protocol option enables users to control DENSO robot via device such as PC, PLC, vision system, or smartphone. Solution incorporates server mode that accelerates communication between robot and control device, further reducing development time. With this protocol, users can control their DENSO robots using devices that have familiar interfaces and common programming languages. Read More


C/C++ Compilers deliver CUDA architecture for x86 platforms.

June 22, 2011

Designed for systems based on 64-bit and 32-bit x86 architectures, PGI CUDA C and C++ Compilers enable developers to use CUDA parallel programming model to optimize performance of critical parts of code base, targeting servers and clusters with or without NVIDIA GPUs. When run on x86-based systems, PGI CUDA C/C++ applications perform parallel execution by using multiple processor cores and Streaming SIMD Extensions, including AVX instructions available on x86 compatible CPUs from Intel and AMD. Read More

Software, Communication Systems & Equipment

Scalable Peer-to-Peer Platform advances proximal communications.

February 14, 2011

FlashLinq(TM) enables devices to discover each other automatically and continuously as well as communicate, peer-to-peer, at broadband speeds without intermediary infrastructure. Complementing cellular-based services and serving as scalable platform for new types of applications, solution leverages synchronous TDD OFDMA technology operating on dedicated licensed spectrum and offers 1 km discovery range, discovery capacity for thousands of devices, and distributed interference management. Read More


Embedded API provides access and control of hardware resources.

November 26, 2010

Supporting form factors ranging from AdvancedTCA® to VPX, Kontron Embedded Application Programming Interface 1.0 helps minimize OEM development work and time spent from initial design to cross-platform migrations, including validation and verification. Middleware package is compliant to PICMG®'s EAPI, but extends feature set by adding basic system information, temperature and voltage monitoring, CPU performance, and thermal control. All functions can be called remotely via Internet. Read More


Software Licensing Application handles variety of license types.

November 4, 2010

Designed to protect Mac and Windows software applications, QuickLicense v5.0 applies variety of configurable license types and activation processes. Program protects software written in any programming language including desktop applications, plugins, spreadsheets, services, or multi-media content. It provides subscription licenses starting from activation date, subscription grace period, quick validate for plugins and multi-threaded software, dual licenses, and remote data retrieval. Read More


OCX Driver facilitates programming of motors and controllers.

September 27, 2010

Designed for JVL MAC050-141, MAC800, and QuickStep motors and SMC75 Controller, OCX-Driver supports programming in LabView, Excel, Visual Basic, Visual C++, Visual.Net, Delphi, and Borland C++ Builder. Program enables users to read and write register values to and from motors and controller, and addresses special MAC protocol with checksum, inverse byte, register length, and register format. Read More

Computer Hardware & Peripherals, Software

Flash Programming System aids production of XC2000-based designs.

July 24, 2009

Suited for end-of-line integration into production environments, SpeedFlash-XC erases and programs Flash, verifies Flash content, and if necessary protects Flash on products utilizing Infineon 16-bit microcontroller-based design. System connects up to 8 probes to needle bed production equipment via JTAG or DAP, and obtains production data by connecting probes to production computer via USB. System supports complete family of Infineon XC66/XC2000/XE166 microcontroller derivatives. Read More


Software offers selective soldering programming solution.

September 19, 2008

Optimized for Microsoft® .Net platform, CamConductor(TM) v2.5 enables programming PCB through-hole soldering using RPS selective soldering equipment. Programming can be done offline and supports variety of PCB input types including JPEG, TIFF, Gerber, and CAD. Features include ability to toggle between millimeter and inch measurements and program step & repeat, universal pump and axis off-set parameters, as well as vertical and horizontal point and path alignment. Read More

Software, Communication Systems & Equipment

Low-Power Protocol handles small RF networks.

September 19, 2007

Suited for small RF networks with less than 100 nodes, SimpliciTI(TM) low-power radio frequency (RF) protocol runs on MSP430 microcontrollers and CC110x/CC2500 RF transceivers. It supports peer-to-peer communication to use access point to store and forward messages and range extenders to extend range of network to 4 hops. Network protocol supports wide range of low-power applications including alarm/security, automated meter reading, home automation, and active RFID. Read More