Engineering

Related Categories
Software

22xx Series Digitizers characterize event to nsec and sub-nsec timing ranges.

April 28, 2017

Available in PCIe, PXIe and LXI form factors with sampling rates of 1.25, 2.5 and 5 GS/s, 22xx Series Digitizer features acquisition memory 1 GSample/channel. Offering x10 (20 dB) or x100 (40 dB) gain, units are designed in 500 MHz or 1.5 GHz bandwidth options. PCIe and PXIe versions come with one, two and four channels whereas LXI-based instruments have 2 to 24 fully synchronous channels.... Read More

Software

Rhino3DPRINT 2017 and Visual3DPRINT 2017 Software can perform Boolean set operations.

April 7, 2017

Creating nozzle paths and corresponding G-code for FDM/SLA printers, Rhino3DPRINT 2017 and Visual3DPRINT 2017 Software provides support geometry to hold up overhangs during printing. Software creates meshes from raw point clouds and stitches them for making water-tight and amenable to 3D printing.

Read More

Electronic Components & Devices, Software, Test & Measuring Instruments

Keysight Technologies Introduces 10 PXIe Instruments to Advance Research in 5G, Aerospace & Defense, Quantum Technologies

February 25, 2017

New class of PXIe arbitrary waveform generators, digitizers and oscilloscopes provide up to 1 GHz bandwidth for complex baseband IQ signal generation and analysis

Highlights:

  • Easy-to-use, on-board FPGA allows non-programmers to customize and accelerate test while accessing full performance of the FPGA
  • Precise timing and synchronization provide phase coherency for... Read More

Software

International TechneGroup Limited (ITI) Partners with Process Industry Solution Provider ITandFactory GmbH

February 3, 2017

Cambridge, UK, 2 February 2017 – International TechneGroup Limited (ITI) the global leader providing reliable interoperability, validation and migration solutions for product data and related systems, and developers of the CADfix software, has teamed with ITandFactory GmbH, creators of the integrated plant design and engineering data management solution, CADISON®.

CADISON® solution... Read More

Software

LiveLink™ for SOLIDWORKS® allows CAD model to be synchronized with software packages.

February 3, 2017

Allowing easy access for launching and running simulation apps which are used in synchronicity, LiveLink™ for SOLIDWORKS® comes with Bike Frame Analyzer app that enables LiveLink™ to update geometry while computing stress distribution in bike frame under loaded condition. Allowing CAD model synchronization between software, SOLIDWORKS® helps users to browse and run apps within the... Read More

Software

Mechanical Suite for Revit® enables user to create virtual piping project.

January 30, 2017

Mechanical Suite for Revit® increases efficiency of AutoDesk® Revit® 2016 and 2017 in designing grooved piping systems. Supporting future version updates, Mechanical Suite for Revit® provide precised LOD 500 fabrication level content with couplings gapped for specified pipe lengths and ensures accurate BOM saving time and cost.

Read More

Software, Test & Measuring Instruments

ExpertTCP™ offers simultaneous traffic generation/reception.

January 18, 2017

Featuring two Electrical/Optical 10/100/1000 Mbps ports, ExpertTCP™ performs comprehensive testing of wirespeed Ethernet networks. Supporting up to 16 TCP connections at 10 Gbps, product uses ExpertSAM™ to measure true TCP throughput, Latency and Frame Loss. Able to define Ethernet, IP and UDP header fields, ExpertTCP™ is used to test individual links/switches, local Ethernet/IP... Read More

Software

New Functions for Mill Turning

January 18, 2017

Wessling (Germany), 17 January 2017 – OPEN MIND Technologies AG has now released the latest version of its CAM system, hyperMILL® 2017.1. Users now benefit from many new functions and optimisation tools that make programming faster while reducing auxiliary processing times when carrying out machining jobs. The software developer has also made crucial additions to hyperCAD®-S, its... Read More

Software

Agency for Defense Development Licenses VABS Composite Simulation Software

January 12, 2017

West Jordan, Utah (USA), January 9, 2017 ‐ AnalySwift, LLC, a provider of efficient high‐fidelity modeling software for composites and other advanced materials, announced today that the Agency for Defense Development in South Korea has licensed and is leveraging its VABS simulation software to accelerate the simulation of composite slender structures.

Located in South Korea, the... Read More

Machinery & Machining Tools, Software

CGTech to Demonstrate VERICUT 8 Tips at AeroDef

December 30, 2016

VERICUT 8.0 streamlines the NC validation workflow

Irvine, CA - At AeroDef Manufacturing 2017 VERICUT CNC machine simulation, verification and optimization software will be featured in CGTech’s booth 731. The software simulates all types of CNC machining, including drilling and trimming of composite parts, water jet, riveting, robots, mill/turn and parallel kinematics. VERICUT... Read More

Software

ProfitTurning™ ESPRIT CAM Software reduces residual stresses.

December 22, 2016

Suitable for OD/ID/face cutting, latest version of ESPRIT CAM software offers lathe roughing strategy while reducing machine cycle time. Featuring trochoidal turning and controlled engagement techniques, software uses physics-based cutting engine. With optimal cutting along toolpath, ESPRIT maintains consistent cutting forces and chip loads. Suitable for thin walls or hard materials, software... Read More

Software

Technical University of Munich Leverages VABS to Accelerate Design of Extreme Altitude Composite Rotorcraft Blades

November 19, 2016

West Jordan, Utah (USA)- AnalySwift, LLC, a provider of efficient high-fidelity modeling software for composites and other advanced materials, announced today Technical University of Munich (TUM) is leveraging its powerful VABS software to accelerate design of composite helicopter rotor blades. TUM has used VABS for a variety of projects, including the Autonomous Rotorcraft for Extreme... Read More

Services, Software

CADWorx Structure offers automatic production of plant design deliverables.

November 14, 2016

AutoCAD-based fit-for-purpose tool for creating concrete and steel structure designs and engineers who model plant buildings, CADWorx Structure is focused on excelling in structural modeling and design. Allowing design and engineering to share relevant information seamlessly, thereby maintaining accuracy, device delivers structural design with virtually no technical and administrative overhead... Read More

Services, Software

AMS ARES Monitoring Platform offers instant access for asset monitoring.

October 31, 2016

Gathering data from multiple sensing technologies, AMS ARES Monitoring Platform shows current health status of plant assets. Shifting away from managing data and toward delivering actionable insights, ARES platform alerts user with information on asset health in order to fix problems before they become production issues. Accessible through laptops, smartphones and tablets, platform takes... Read More

Software

International TechneGroup Incorporated (ITI) to Feature 3D CAD Model Quality Solutions in Upcoming Automotive Events

October 27, 2016

Milford, Ohio – International TechneGroup Incorporated (ITI) will be at two important automotive conferences in early November to discuss the benefits of validating the 3D design data that drives the automotive industry. On November 3rd the CIMdata PLM Road Map™ event for automotive industry executives and PLM practitioners will be held at the Inn at St. John’s in Plymouth, MI. ITI’s CAD... Read More

Software

Cadence Enables Customer Innovation with ARM-Optimized Solutions from Chips to Boards to Systems at ARM TechCon 2016

October 24, 2016

SAN JOSE, Calif., Oct. 18, 2016 - Cadence Design Systems, Inc. (NASDAQ: CDNS) today announced it will showcase ARM®-optimized solutions from chips to boards to systems at ARM TechCon 2016. The event is being held October 25-27, 2016, in Santa Clara, Calif., with Cadence®, a diamond sponsor, in booth 200. To register for the conference, visit Read More

Software

Inspection and Reverse Engineering Software integrate with CAD.

October 17, 2016

Part of VXelements v5.1, VXmodel scan-to-CAD module lets users transfer data directly to Autodesk Inventor, streamlining reverse engineering process. Users can combine mesh files, with or without textures, and with different resolutions—regardless of which device generated them. Supporting STL-STL comparisons, VXinspect module enables optimized alignment and comparison of 2 meshes. Users can... Read More

Controls & Controllers, Software

US Machine Tool Control Specialist chooses NUM CNC for Precision Grinding Applications

October 17, 2016

CNC systems’ ultra precise positioning capabilities provide key competitive edge Naperville, IL — Advanced CNC systems from NUM are helping US machine tool control specialist CNC Onestop, Inc. to maintain its competitive market edge through use of ultra precise positioning techniques. Based in Xenia, Ohio, and also operating in Toronto, Canada, CNC Onestop is a CNC engineering company that... Read More

Machinery & Machining Tools, Software

CNC Routing System targets ACM fabricators.

October 14, 2016

Providing dual and triple head configurations, PANELBuilder 17 is designed exclusively for aluminum composite material fabricators. Machine allows users to develop library of panels using built-in parametric modeling, through use of built-in CAD drawing package or by importing existing drawings via DXF or DWG formats. Software then automatically generates machine toolpaths for cutting all panels.... Read More

Software

International Technegroup (ITI) Cadfix Repairs Models in Minutes, Saves Millbrook Days of Work

October 10, 2016

International TechneGroup (ITI) CADfix repairs models in minutes, saves Millbrook days of work Milford, Ohio – International TechneGroup Incorporated (ITI), the global leader providing reliable interoperability, validation and migration solutions for product data and related systems, demonstrates that CADfix can deliver fast and effective translation and repair of CAD models and earns the trust... Read More