Software

Software

Intelligent Remnant Handling with Lantek Expert

September 28, 2015

With Lantek Expert nesting technology, utilizing remnants of sheet material can deliver worthwhile cost savings. The CAD/CAM nesting software is able to model the way in which each company works with remnants, and establish rules from this, to intelligently manage their handling and use. The use of remnants is not always a clear cut decision, as cost of material, extra handling, the size of... Read More

Software

Altair Embeds Brüel & Kjær Sound Simulation in CAE

September 23, 2015

Brüel Kjær’s NVH simulation expertise lets designers listen to alternative CAE models DENMARK,  - Brüel and Kjær noise, vibration and harshness (NVH) simulation software is now available to automotive designers as a module in Altair HyperWorks CAE design software. David Mason, Vice President, Global Automotive at Altair, said: “Altair is thrilled to be adding Brüel and... Read More

Software

Anark Awarded US Air Force Contract to Support A-10 Wing Replacement Program

September 23, 2015

Hill Air Force Base to deploy Automatic 3D Part Report Generation System based upon Anark Core® Software to Streamline Provisioning and Maintenance Operations for A-10 Thunderbolt Boulder, CO - Anark Corporation, leading provider of Model Based Enterprise (MBE) and Visual Communication software solutions, announced today that it has been awarded the production 3D MBE contract from Hill AFB for... Read More

Services, Software

Guardian Fence Sales Management Implements New CRM and New Internal Training Program

September 23, 2015

Brian Denny didn’t think he could go back to work after he sustained a high level spinal cord injury (C3-C4). Unable to move his upper or lower body, Brian uses a power wheelchair that he manipulates by blowing into a straw-like device called a sip and puff. It takes patience and determination, something that Brian has in great supply. “Brian was hurt on the job while he was working at a... Read More

Software

CAM Software supports high-efficiency roughing.

September 21, 2015

With optimized Vortex area-clearance strategy, FeatureCAM 2016 enables fast, safe metal removal from solid carbide tooling, in particular designs that give deeper cuts by using full flute length as cutting surface. Software offers ability to adjust and fine tune non-cutting moves of 2.5D and 3D Vortex toolpaths, and supports multi-tasking bar-fed milling machines. For users of FeatureTURN,... Read More

Services, Software

Honeywell's Automotive Software Group Shaping the Future by Improving Powertrain Performance

September 21, 2015

Honeywell's OnRAMP Design Suite uses advanced control software to help optimize the next generation of engine performance and efficiency FRANKFURT, Germany - Software technology is shaping the future of automotive transportation and Honeywell (NYSE:HON) is at the forefront of this transformation helping auto makers improve fuel economy, reduce material costs, improve the vehicle performance... Read More

Software

Software Suite improves survey, CAD, and GIS workflows.

September 21, 2015

Promoting efficacy when working with GIS databases, Trimble Business Center v3.60 provides editing and QC options for surveyors and GIS professionals. CAD and drafting tools let CAD professionals create final project deliverables within Trimble Business Center. In addition to tools for generating precise and accurate data, software enables surveyors to post process individual GNSS... Read More

Optics & Photonics, Software, Test & Measuring Instruments, Vision Systems

Trimble Demonstrates Comprehensive Geospatial Workflows at INTERGEO 2015

September 21, 2015

Solutions with Optimal Accuracy and Greater Productivity for Geospatial Professionals STUTTGART, Germany - Trimble (NASDAQ: TRMB) announced today it will demonstrate its comprehensive portfolio of Geospatial solutions at INTERGEO 2015. Trimble's portfolio of aerial imaging, mass and point data capture, GIS mapping and terrestrial imaging tools enable surveying, engineering and mapping... Read More

Controls & Controllers, Material Handling & Storage, Software, Transportation Industry Products

Econolite to Feature a Comprehensive Line up of ITS Solutions at the 2015 ITS CA Annual Meeting

September 21, 2015

Anaheim, Calif. - Econolite today announced that it will showcase its latest in vehicle detection solutions, traffic cabinets and controllers, Centracs® ATMS and Connected Vehicle applications at the upcoming 2015 ITS California Annual Meeting being held September 21-23 at the LAX Hilton. Econolite will welcome attendees to its booth (#17), where company representatives will be on hand to... Read More

Software, Test & Measuring Instruments

TDM Unites Businessmen, Designers and Manufacturers

September 15, 2015

In response to Industry 4.0 TDM Systems demonstrates how productive Tool Data Management can help reduce cost within the planning and productions process. The focus of Industry 4.0 is to optimize manufacturing through an overall approach, a logical development in recent years. It is nothing more than the automation and networking of production systems. Such systems are able to provide information... Read More

Machinery & Machining Tools, Software

Cadence to Showcase Latest PCB Design Tools at PCB West 2015

September 14, 2015

Media Alert: Cadence to Showcase Latest PCB Design Tools at PCB West 2015 SAN JOSE, Calif. - Cadence Design Systems, Inc. (NASDAQ: CDNS) plans to feature its latest scalable OrCAD® and Allegro® technologies at PCB West 2015 in booth #406 from September 15-17, 2015, in Santa Clara, Calif. WHAT: Cadence® is scheduled to hold demonstrations and presentations in its booth highlighting new... Read More

Software, Test & Measuring Instruments

Portable M-PHY Protocol Analyzer supports UniPort/UFS.

September 4, 2015

Eclipse X34 monitors, captures, decodes, and analyzes protocol traffic from multiple interfaces: SSIC, MPCIe, and UniPort/UFS. Configurable analyzer, supporting GEAR1, GEAR2, and GEAR3 at high speeds and G0-G7 at low speed and low power, captures up to 4 lanes of data traffic (up to 8 when linked to another Eclipse X34). Trace-buffer options exist for up to 3 GB for single analyzer and... Read More

Software

Structural Analysis Software includes 3D CAD modeler.

September 3, 2015

Equipped with 3D CAD modeler and 64-bit multi-processor solvers, GT STRUDL® 2015 offers fully integrated, database-driven system for frame and finite element linear and nonlinear static and dynamic analysis as well as comprehensive steel and reinforced concrete design. CAD modeler enables users to create simple to highly complex structural models for analysis and design purposes and to display... Read More

Services, Software

Online 3D Model Library streamlines architectural workflow.

September 2, 2015

Offering built-in parameters, metadata, and additional intelligence, online Architect Library provides links to individual product files in 3D Revit® building information models (BIM) as well as compressed bulk files for Ultra Series and VistaLuxe Collection window and door families. BIM tools allow architects to view products from different perspectives while incorporating design... Read More

Material Handling & Storage, Software

TDM Systems Tool Crib Module Helps Reduce Machining Downtime

September 2, 2015

The TDM Tool Crib Module from TDM Systems, a manufacturer of tool and resource management software, organizes tools and production resources including those tools that are located off-site. The TDM Tool Crib Module can map each physical crib and adapt itself to the user. At the same time, it integrates easily in terms of Tool Lifecycle Management into higher level systems. The Module is flexible... Read More

Controls & Controllers, Software

Galaxy Control Systems Earns GSA FIPS 201 Approval

September 1, 2015

System Galaxy Now Listed on Approved Products List Walkersville, MD  - Following an extensive testing and evaluation process, System Galaxy from Galaxy Control Systems has earned Federal Information Processing Standard Publication 201 (FIPS 201) Certification and is now on the GSA Approved Products List (APL) in the PACS Infrastructure category. “U.S. Government agencies rely on the GSA... Read More

Software, Test & Measuring Instruments

Vi TECHNOLOGY to Exhibit the Latest Generation of SPI and Sigma Review Software at SMTAI

September 1, 2015

Saint-Egrève, France – Vi TECHNOLOGY, a leading provider of inspection solutions for PCB assembly, will exhibit in Booth #808 at SMTA International, scheduled to take place Sep. 29 - 30, 2015 at the Donald Stephens Convention Center in Rosemont, IL. Company representatives will demonstrate its complete SMT inspection solutions, including the PI series (SPI), K series (AOI) and Sigma Link... Read More

Fluid & Gas Flow Equipment, Laboratory and Research Supplies and Equipment, Software

Hospira Announces First Installation of Plum 360(TM) Infusion System with Hospira MedNet(TM)

September 1, 2015

Next-generation infusion system offers expanded drug library and EMR interoperability LAKE FOREST, Ill. – Hospira, Inc. (NYSE: HSP), the world's leading provider of injectable drugs and infusion technologies, today announced the first installation of the Plum 360™ infusion system with Hospira MedNet™, at Shannon Medical Center in San Angelo, Texas. The Plum 360 infusion system,... Read More

Software

Discover 2D/3D Interface Analysis Software from Akrometrix LLC at SMTAI

August 31, 2015

ATLANTA, GA– Akrometrix LLC, the leader in elevated temperature surface characterization, will exhibit in Booth #134 at SMTA International, scheduled to take place Sep. 29 - 30, 2015 at the Donald Stephens Convention Center in Rosemont, IL. Company representatives will demonstrate the Interface Analysis software that allows high level and in-depth review of the attachment interface between two... Read More