Professional Services


Design for Manufacturability Service provides early feedback.

November 20, 2015

With Design for Manufacturability Service, company ensures that its customers' part designs will be manufacturable throughout product lifecycle. Team of engineers will review new silicone part designs for material type, undercuts, gate locations, parting line locations, tolerances, and other geometric features among others. Once manufacturability review is complete, design changes will be communicated to customer for additional implementation. Read More

Automatic ID, Services

Small Barcode Readers target OEM installations.

November 16, 2015

At under 1.6 in.², MicroHAWK ID-20 weighs less than 1 oz and takes less than 1 minute to begin decoding. MicroHAWK ID-30 features IP54-rated aluminum enclosure, optional add-on integrated LED lighting, and RS-232 and USB connectivity options in single corner-exit cable. MicroHAWK ID-40, at less than 1.75 in.², comes in tiny IP65/67-rated enclosure rugged enough to withstand dusty, harsh, and washdown environments. All include sensor options from WVGA to SXGA to 5MP QSXGA and speeds up to 60 fps. Read More

Software, Test & Measuring Instruments, Services, Health, Medical and Dental Supplies & Equipment

VR Scenarios, Anatomical Models aid cardiology training, surgery.

October 16, 2015

Designed for ANGIO Mentor™ endovascular simulator, scenarios for Coronary CTO (Chronic Total Occlusion) and Coronary Bifurcation cases provide cardiologists with training for treatment techniques with Percutaneous Coronary Intervention (PCI). Cardiovascular anatomical models can enhance planning in complex procedures, and cardiovascular anatomical modeling service uses patient-specific imaging data from CT or MR scans to design patient-specific model that can be 3D printed.
Read More

Mechanical Power Transmission, Services

Planar XY Air Bearing Stage provides vibration-free motion.

September 9, 2015

Offering travels up to 200 x 200 mm, A-311 PIglide IS Series features fully preloaded air bearings that provide frictionless motion, resulting in negligible hysteresis or reversal error. Single base plate design facilitates integration in tight spaces. By eliminating height and overhung loads of XY stack design, stage achieves 0.1 µm/in. straightness and flatness and roll/pitch/yaw errors of 1–2 arc-sec. Position information down to 1 nm resolution comes from integrated linear encoders. Read More


Consulting Service provides system-wide surge assessment.

September 3, 2015

Blacoh Surge Control provides customized engineering solutions for large scale pressure vessels in surge protection, pressure regulation, storage, and pump control. These types of large surge vessels are typically used in chemical processes, water, wastewater, fire protection, mining, oil and gas pipelines, loading terminals, and refining applications. Blacoh Metal Solutions offers one-stop sourcing service for metal tubing and piping products. Read More


Cyber Security Platform identifies operational threats.

August 3, 2015

By providing up-to-date research results and discoveries, Industrial Threat Intelligence Platform enables utilities worldwide to identify malicious and operational threats. Services are based on insights derived from diverse sources: monitoring of real operational networks, forensics, and research. Also, platform publishes periodic and ad-hoc research based discoveries, threat alerts, and reports. Team also discloses vulnerabilities they discover to both ICS CERT and affected vendors. Read More

Services, Construction Equipment & Supplies

Construction Planning Software optimizes data delivery.

July 2, 2015

Available for linear civil engineering projects, TILOS v9.0 time and location planning software merges technical and schedule information into one dynamic plan. Gantt chart format visually connects site layout with user-defined project time frame, while integration with third-party project management software aids data exchange. Specifically, solution integrates with Primavera project management software and Trimble Business Center-HCE office software for construction takeoff/data prep. Read More


Shelf-Ready Modeling Service replicates clear packages.

May 22, 2015

Providing brand owners with wide variety of water-clear or tinted plastic container prototypes, Shelf-Ready Modeling capability gives marketers ability to evaluate package concepts in form that closely approximates production versions. Appearance package models can be filled and labeled with closures applied to create containers that can be used for shelf simulation, aesthetics, and physical impression, as well as for consumer focus groups. Read More

Architectural and Civil Engineering Products, Services

Color Graphics permanently decorate structural foam.

May 20, 2015

Fusing with polyethylene (PE) and polypropylene (PP) on subsurface level to permanently decorate injection molded PE and PP products, Polyfuze technology also works on structural foam. Single- or multi-colored graphics, applied using standard hot stamp equipment, are comprised of polymer-based, pigmented plastic that is 100% recyclable and can be manufactured to comply with FDA, ASTM, CPSIA, RoHS, and REACH standards. Graphics also withstand weathering and fuel/solvent/chemical removal.
Read More


Service Offerings provide guidance on OSHA space standards.

April 27, 2015

Offered via onsite visitation, Confined Space Inventory and Classification Service aligns with OSHA requirements to promote understanding regarding what is considered confined space and permit space. Confined Space Procedure Audit helps clients comply with OSHA's standard on keeping written confined space programs and procedures up to date. Procedures are reviewed for accuracy, and any data needed to improve procedure documentations is collected. Read More


Consultancy Service maximizes credit union resources utilization.

April 3, 2015

SymAdvisor™ provides on-site consultants to help credit union managers develop strategy to effectively utilize Symitar® systems, complementary Jack Henry solutions, and integrated third-party vendor products. In addition to getting more out of existing technology investments, practical recommendations cover staffing resources needed to move project forward. Concrete steps are created for reaching each project's objectives, providing guidance and resources to also identify future growth areas. Read More

Services, Optics & Photonics

Opto-Mechanical Services create simple to complex assemblies.

April 3, 2015

In addition to design services in Zemax and SolidWorks, Opto-Mech Program includes Class 100 clean room manufacturing, and advanced testing and metrology, such as active optical alignment, transmitted wavefront testing, and MTF/image quality testing. Program focuses on engineering, precision assembly techniques, adhesives, mechanical retention methods, and stringent tolerance standards to ensure that peak performance is achieved for every product assembled. Read More

Automatic ID, Vision Systems, Software, Services

Barcode Tracking Systems feature all-inclusive design.

March 17, 2015

Scalable and customizable, The Total Track™ Solutions for all Checkmate Programs include software, training, labels, installation, and jump start implementation kit. Equipment Tracking Software tracks who has equipment, where it is, and when it is due back, while Asset Tracking Software help companies manage fixed assets such as furniture and electronics. Other solutions include Job Tracking Software, Document Tracking System, and Inventory Management Solutions. Read More

Software, Services

Predictive Anti-Fraud Analytics uncover telecom frauds.

March 11, 2015

As predictive, machine learning-based fraud prevention solution, Mobileum Anti-Fraud Analytics helps telecom operators arrest revenue leakage. Solution runs on Wisdom Big Data and Analytics platform, which can mine through billions of unsuspected usage transactions in real-time to discover anomalous patterns of emerging fraudulent behaviors. This breadth helps detect deviations in known types of frauds and identify unknown frauds across voice, data, and SMS scenarios. Read More


Custom Graphic Overlays facilitate OEM labeling.

February 2, 2015

Allowing OEMs to private label products without modifying housing/chassis, NFi Graphic Overlays feature subsurface printing to protect images and data from wear caused by abrasion, chemicals, and weather. OEMs can also integrate different window openings to expose LEDs, LCDs, and switches or cover unused devices. Made from Mylar® (polyester) or Lexan® (polycarbonate) and zoned adhesive combinations, overlays range from 0.005–0.030 in. thick and can incorporate various features and finishes. Read More

Computer Hardware & Peripherals, Labels, Tags, Signage & Equipment, Services

Custom Keypad Graphics feature embossed appearance.

December 18, 2014

NFi Keypad Graphic Overlays feature detailed dimensional imagery that appears as embossing while providing clear, visual indication of active key areas. Available full-color in any size and shape, keypads can be made from polycarbonate or polyester, laminated underneath to prevent machine induced abrasion, and include spacer backings, zoned adhesives, and EMI/RFI shielding. Products are subsurface printed and can also include holes and windows. Read More

Software, Communication Systems & Equipment, Display & Presentation Equipment, Services

Live-Streaming Video Solution enables remote collaboration.

November 4, 2014

Designed as browser interface, Vidcie Central securely connects corporate experts to remote staff through Vidcie's enterprise-grade cloud service. Companies can view live video streams from remote team members, optimizing communication between headquarters and field. Available for iOS and Android smartphones and connected tablets, Vidcie App enables any worker to turn mobile device into self-contained video-streaming device, and live-stream video back to Vidcie Central. Read More

Labels, Tags, Signage & Equipment, Controls & Controllers, Services

Overlay Panels target LEDs, LCDs, and VFDs.

September 23, 2014

To provide clear, distortion-free windows, NFi Graphic Overlay Panels are custom made using Texturite™ process, which starts with hard-coat clear material such as Lexan® or Mylar®. Units feature clear, diffused, anti-glare, and colored windows, and can incorporate high-resolution graphic images which are digitally printed on polycarbonate or polyester subsurface. Brushed, embossed, glossy, matte, and textured finishes as well as wide range of engineered adhesives are offered with selective zones. Read More


Engineering Services utilize SolidWorks 2014.

September 3, 2014

In addition to offering materials such as aluminum, copper, carbon steel, stainless steel, and brass, Vulcan GMS offers contract engineering services. Company can supply customers with models and drawings of components or assemblies, design castings, and transition from machined solids into castings, fabrications, and machined parts. With in-house 3D prototyping capabilities, Vulcan can also handle design and provide 3D samples or gauges. Read More


Rapid Design Service provides drilling and boring inserts.

August 1, 2014

With Walter Xpress rapid design and delivery service, user tells Walter their machining requirement. Experts then enter customer-specific parameters into configuration system. For drilling and boring tools, variable parameters include diameter, max number of 3 steps, step lengths, and chamfer angles. System designs required tool and outputs documentation, including 3D model. Customer receives quote within 24 hours. In background, BOM, work schedule, and NC manufacturing programs are created. Read More