Other Services

Sensors Monitors & Transducers, Services, Test & Measuring Instruments

Q-Lab CX-Series Corrosion Test Coupons meet GMW14872 and ASTM B117 standards.

April 17, 2017

Ensuring repeatability and reproducibility during laboratory corrosion testing, Q-Lab CX-Series Corrosion Test Coupons meet international modern corrosion test methods requirement. CX-series come with Certificate of Analysis and ready to use right of the package. Units are available in different shapes, alloys and finishes.

Read More


Cross-Merchandise on Fresh Area Fixtures with New Metal Merchandisers

April 14, 2017

Cross-merchandise products on fresh-area fixtures with Metal Cross Merchandisers, new from FFR Merchandising.

Metal Cross Merchandisers help boost impulse and complementary item sales by cross-merchandising product on fixtures throughout the store. Designed for placement on square-edge fixtures or flat tables, the merchandisers are ideal in fresh areas-especially produce fixtures.

... Read More


Multicyl - Double Horizontal Dimple

April 3, 2017

In addition to all the standard operations we provide solutions for, at Multicyl Inc. we also pride ourselves in the solutions we design for our customers’ unique and custom applications. We recently had a customer who required a very precisely shaped and located obround dimple that was needed to locate a pipe in an assembly application. A variation on our H5 double horizontal tube piercing... Read More


Abaco Demonstrates Prototype of Very Small Form Factor, High-Performance, Mission-Ready Graphics System Based on New NVIDIA Jetson TX2

March 10, 2017

-Will offer unique combination of leading performance, small size and weight

-Proof of concept shows advanced readiness

HUNTSVILLE, Ala., March 8, 2017 - Abaco Systems has demonstrated an advanced prototype of a very small form factor, rugged, mission-ready system for graphics applications based on the new NVIDIA Jetson TX2 system on a module.

Optimized for minimal SWaP-C... Read More


KLA-Tencor Introduces New Metrology Systems for Leading-Edge Integrated Circuit Device Technologies

February 24, 2017

Comprehensive Process Control Facilitates Advanced Multi-Patterning Techniques and EUV Lithography

MILPITAS, Calif., Feb. 22, 2017 - KLA-Tencor Corporation (NASDAQ: KLAC) today introduced four innovative metrology systems that enable development and high-volume manufacturing of sub-10nm integrated circuit (IC) devices: the Archer™ 600 overlay metrology system, the WaferSight™ PWG2... Read More

Retail and Sales Equipment, Services

DisplayNet DN-200 Series offers resolutions up to 4K/60p with 8-bit color.

February 3, 2017

Supporting 4K/60p with 10-bit color (HDR), DisplayNet DN-200 Series come with HDMI 2.0 input. Featuring HDCP 2.2, DisplayPort 1.2 input and USB 2.0 at 480Mbps, product enables MultiViewer applications. DN-200 uses DisplayNet Manager Software for communicating with DisplayNet Server™. Product is available in 2 models with choice of CAT-X twisted pair cables or signal distribution over fiber... Read More

Fluid & Gas Flow Equipment, Services

Hays Fluid Controls Releases Initial Revit - Model - Drawing File Configurator

January 21, 2017

To support our building owner, MEP, and contractor customers Hays Fluid Controls has released our initial Revit – Model - Drawing File Configurator for the 2519 Mesurflo® Y-Ball Automatic Balancing Valve where files are available for download within the product page. We invite you experience our new configurator.

Hays Fluid Controls, founded in 1865, is been committed to exceeding... Read More


Sumitomo Electric Starts Operation of Concentrator Photovoltaic Power Generation Pilot Plant

December 3, 2016

SAN JOSE, Calif., Dec. 1, 2016 - Sumitomo Electric Industries, Ltd (SEI). has completed the construction of a 1 MW concentrator photovoltaic (CPV) power generation plant in the Kingdom of Morocco, the company's first megawatt-class CPV project. The completion coincided with the 22nd Conference of the Parties to the UNFCCC (COP 22) being held in Morocco, providing further evidence of the... Read More


AAMA released an updated document using ASTM test methods.

December 3, 2016

American Architectural Manufacturers Association (AAMA) released updated document methods to qualify windows, doors and skylights as "impact resistant." AAMA 506-16, "Voluntary Specifications last updated in 2011, provides details regarding the rating of windows, doors and skylights for impact and pressure cycle testing. Released version has been updated to reference the most current ASTM... Read More


ANSI C78 Committee revises electric lamps safety standards ANSI C78.1195.

November 28, 2016

NEMA revises electric lamps safety standards ANSI C78.1195 which is adopted by ANSI ASC C78 as a nationally acknowledged international standard. Revision of IEC 61195, ed2.2 (2014-09) includes deviations for clauses 2 and 3.

Read More

Non-Industrial Products, Services

National Renewable Energy Laboratory received three R&D 100 Awards.

November 28, 2016

National Renewable Energy Laboratory (NREL) last night honored with three R&D 100 Awards, presented by R&D Magazine. The prize in Mechanical/Materials category was awarded to EcoSnap-AC Heat Pump System created by Chuck Booten and Jon Winkler from Advanced Residential Buildings research group. The award in Analytical/Test category went to Battery Internal Short-Circuit Device developed by... Read More


NEMA fixes voltage ratings for 60Hz electric power systems above 100V.

November 28, 2016

National Electrical Manufacturers Association (NEMA) announced ANSI Accredited Standards Committee C84 revised ANSI C84.1 American National Standard for Electric Power Systems and Equipment-Voltage Ratings (60Hz). Establishing nominal voltage ratings and operating tolerances for 60Hz electric power systems above 100V, NEMA added 690/400V category to low Voltage Class in table 1 also paragraph... Read More


IPC Awards ISC Engineering, LLC IPC/WHMA-A-620 Qualified Manufacturers Listing (QML) certification.

November 28, 2016

Having successfully completed audit, ISC Engineering facility was awarded IPC/WHMA-A-620, Requirements and Acceptance for Cable and Wire Harness Assemblies certification. Launched in 2014, IPC standards certification enables company to be listed as an IPC-trusted source capable of manufacturing products in accordance with industry best practices.

Read More

Electrical Equipment & Systems, Services

PSC-6238 Power Supply offers shutdown control for each power rail.

November 17, 2016

Designed to operate in military environment, PSC-6238 VITA 62 compliant power supply features onboard real-time clock with switchable Battleshort and Nuclear Event Detect functions. Including 3-color LED status indicator in front I/O panel, unit outputs 800 watts power with 1in. pitch form factor. With operating temperature of -400C to +850C at wedge lock edge, device actively monitors... Read More


WEG Present at Pusuno Hydroelectric Project Ecuador

November 14, 2016

Following the corporate policy of offering global solutions with products and electro-electronic systems for the most varied industrial applications worldwide, the WEG Group recently closed the contract for a key supply to Elitenergy Generacion Electrica SA, including electromechanical equipment, installation, monitoring, commissioning and acceptance test services, in addition to the equipment... Read More

Services, Vision Systems

Xilinx Showcases Solutions for Machine Vision Applications at Vision Stuttgart 2016

November 8, 2016

SAN JOSE, Calif., Nov. 1, 2016 - Xilinx, Inc. (NASDAQ: XLNX) will showcase its latest solutions for machine vision applications at Vision Stuttgart 2016. Through in-booth demonstrations and paper presentations, Xilinx and its Alliance Program Members will demonstrate integrated and cost-optimized solutions for machine vision developers. Visit the Xilinx Stand 1C82 at Vision Stuttgart 2016,... Read More

Material Handling & Storage, Paints & Coatings, Services

Hayden Corp Receives Nadcap Accreditation for Thermal Spray

October 27, 2016

Nadcap recognizes Hayden for its commitment to continual improvement in aerospace quality West Springfield, MA - Hayden Corp, a leading thermal spray coating and laser cladding company, recently announced it has received Nadcap accreditation for Thermal Spraying  to AMS2437, AMS2447, Mil Std 2138A Mil Std 1687A.  Nadcap accreditation is critical and in many cases is required for companies... Read More


Tecogen to Develop Cutting-Edge Ultera Emissions Technology for Fork Truck Market

October 24, 2016

Research funded by PERC, to be conducted in collaboration with select industry manufacturers WALTHAM, Mass., Oct. 18, 2016 - Tecogen® Inc. (NASDAQ: TGEN, the "Company") is pleased to announce the Propane Education Research Council (PERC) has awarded research grant funding for the Company's proposal to develop the breakthrough Ultera® ultra-clean emissions control technology for the... Read More

Non-Industrial Products, Safety & Security Equipment, Services

Cascade Aerospace and Sierra Nevada Corporation team to support Canadian Medium Altitude ISR solution

October 7, 2016

ABBOTSFORD, BC - Cascade Aerospace, Canada's prime contractor for the Royal Canadian Air Force C-130 fleet and Sierra Nevada Corporation, an industry leader in aerospace and defense, announced a strategic teaming agreement today to provide dedicated Intelligence, Surveillance and Reconnaissance (ISR) services to Canada. Under the agreement, Cascade and SNC will propose a solution to support... Read More

Electrical Equipment & Systems, Services

Legrand Product Lines Achieve IDW Programmatic Excellence

October 6, 2016

WEST HARTFORD, Conn. – Legrand North America (LNA), the global specialist in electrical and digital building infrastructures, today announced their achievement of Excellence within the Industry Data Exchange Association, Inc.’s (IDEA) data certification program. IDEA’s Industry Data Warehouse (IDW) certification program has long been a way for electrical manufacturers to provide secure... Read More