Oil & Gas Field Services

Mining, Oil Drilling & Refining, Services

Intelligent Chemical Management System aids oil and gas producers.

October 24, 2016

Delivering continuous, real-time data flow directly to laptop or smartphone, VERITRAX™ provides oil and gas producers with fully transparent, automatic chemical control, monitoring, and ordering system. Automation and cloud-based technologies optimize chemical supply chain, maximize production uptime, and foster understanding and control of chemical spend. Chemical pump control and data analysis help ensure correct chemical is delivered at wellsite and at optimized ppm level dosages. Read More

Mining, Oil Drilling & Refining, Sensors, Monitors & Transducers, Services

WellAware Launches Chemical Management Solutions to Reduce Oilfield Operating Costs and Optimize Production

August 4, 2015

New products help operators and chemical service companies address challenging market conditions SAN ANTONIO– WellAware, the oil and gas industry's only full-stack solution for oilfield monitoring and optimization, announced today the launch of WellAware Chemical Management and WellAware Chemical Optimization products. Designed for EP and chemical service companies, the new products...Read More

Services

IIoT and Automation Spend in the Oil & Gas Industry Set to Grow, Perle Confirms

May 27, 2015

Network Connectivity solutions enable Oil Gas Titans to improve efficiency preserve margins. NASHVILLE, TN— Low crude oil prices have reduced rig contract signings, headcounts, drilling and exploration for most companies in the oil and gas industry. However, in the “Oil and Gas Digital and Technology Trends Survey 2015,” recently released by Microsoft and Accenture, investments in...Read More

Mining, Oil Drilling & Refining, Services

Metso's Device Management Solution to Be Implemented at Grupa Lotos's Gdask Oil Refinery

November 13, 2013

Metso's solution has been designed to improve the availability of critical spare parts for maintenance activities while reducing overall costs associated with stocking spare parts. Grupa Lotos S.A. has chosen Metso's Device Management Solution to optimize its valve spare parts stocking and supply. As part of the contract, Metso will also provide its On-site Supervising Service at the Gdask...Read More

Materials & Material Processing, Paints & Coatings, Services

Two Finishing Options Now Available for Oil and Gas Drilling Components - MicroLok And TRU TEMP Provide Efficient Corrosion Protection

September 9, 2013

Eden Prairie, Minnesota – Birchwood Technologies now provides two finishing options for oil and gas drilling components - MICROLOK AO and TRU TEMP. Both finishes provide robust corrosion protection using a safe, low temperature, environmentally friendly process. With U.S. oil and gas production at its highest level in 20 years, the need for finishing components used in the drilling...Read More

Mining, Oil Drilling & Refining, Services, Software

Ofserv Selects Paradigm Sysdrill for Its Expanded Service Offering in West Africa

August 20, 2013

Sysdrill to support new well planning and engineering services. DENVER -- Paradigm (www.pdgm.com) announced that Oilfield Services International, Ofserv, (www.ofserv.com) has adopted Sysdrill, the Paradigm well planning and drilling engineering software solution, for the delivery of drilling support services to the West African market. The announcement was made at the Unconventional Resources...Read More

Mining, Oil Drilling & Refining, Safety & Security Equipment, Services

Industry Award to Aker Solutions' MPO Unit

May 14, 2013

Aker Solutions' subsidiary Managed Pressure Operations yesterday won a prize for its riser safety system at the Offshore Technology Conference in Houston. The Aker Solutions unit won the Woelfel Best Mechanical Engineering Achievement Award for its Riser Safety System (RSS). The award recognizes products, devices or systems that reflect innovation or practical use of mechanical engineering...Read More

Fluid & Gas Flow Equipment, Machinery & Machining Tools, Mechanical Components & Assemblies, Services

Oilfield Technology: The Perfect Machining of Threads on Delivery Pipes and Casings

January 16, 2013

Whether we are talking about North America, Asia or Russia, within the oil and gas industry, there is a spirit of optimism. Geological discoveries have led to a massive increase in the estimated reserves in many countries. Along with these discoveries, the potential for the use of innovative technologies has also increased. According to the expert estimates, oil production in the Gulf of Mexico...Read More

Machinery & Machining Tools, Mining, Oil Drilling & Refining, Services

Super Turning Center Tackles Big Parts, Heavy Duty Turning Perfect for the Oil and Gas Industry

December 28, 2012

Big lathe tackles large parts and heavy duty cutting Great workhorse for oil-field, energy, and construction equipment industries 35 HP spindle and 4-speed gearbox deliver high torque at low RPM One-piece, 45 slant bed design provides the rigidity for heavy turning and unparalleled...Read More

Mining, Oil Drilling & Refining, Services

Weather Not a Factor for Packers Plus to Complete Offshore Fracturing Operations on Time

February 1, 2012

ABERDEEN, Scotland, StageFRAC* technology completed 3.5 times faster than Plug and Gun method Packers Plus Energy Services Inc. completes open hole, multi-stage system in the North Sea 3.5 times faster than the traditional Plug and Gun method. "Our recent success in the North Sea demonstrates that open hole, multi-stage fracturing increases efficiency and decreases costs," said Dan Themig,...Read More

Mining, Oil Drilling & Refining, Services

Aker Solutions Wins sgard Modification Contract

June 30, 2011

Aker Solutions has secured a contract for subsea compression topside modifications of the sgard A and B platforms with Statoil. The contract value is approximately NOK 650 million. The purpose of the modification is to supply electricity to the sgard subsea compressor units, which will be installed in 2013. In December 2010 Statoil awarded Aker Solutions the NOK 3.4 billion contract to...Read More

Electrical Equipment & Systems, Mechanical Power Transmission, Services, Transportation Industry Products

ABB Wins Marine Orders Worth $45 Million

June 12, 2009

Energy-efficient propulsion and reliable power for six offshore vessels Houston, Texas, June 2, 2009- ABB, the leading power and automation technology group, won orders worth around $45 million in the first quarter to supply six new vessels with electric propulsion systems, power systems and drilling drive systems at shipyards in South Korea and Japan. ABB's electric propulsion systems are...Read More

HVAC, Services

Niagara Blower Wet Surface Air Coolers For Offshore Cooling Applications

September 30, 2008

(Buffalo, NY) Niagara engineers and manufactures Wet Surface Air Cooler (WSAC(TM)) closed-loop, evaporative coolers for offshore drilling rig cooling applications. Recently Niagara teamed up with Flow Process Technologies, Inc. to provide five WSACs to an offshore drilling rig located in the Gulf of Mexico operated by a major oil company. It is one of the largest "jack-up" type of drilling...Read More

Machinery & Machining Tools, Services, Transportation Industry Products

Pride International Selects Vetcogray's Advanced Marine Riser System for New Deepwater Drill Ship

February 21, 2008

FLORENCE, ITALY - February 7, 2008 - Pride International, one of the world's largest offshore drilling contractors, has selected the latest version of the MR-6 marine riser system from VetcoGray, a GE Oil & Gas business, for use on a new deepwater drill ship that will be completed in 2010. VetcoGray will supply two MR-6H SE Marine Riser Systems, which offer improved safety and efficiency for...Read More

Mining, Oil Drilling & Refining, Services

Cameron DPS Signs Preferred Supplier Agreement with Schlumberger

January 9, 2008

For Immediate Release - October 10, 2007 - Houston TX - Cameron (NYSE: CAM) has signed a three-year worldwide preferred supplier agreement with Schlumberger Integrated Project Management (IPM) for the supply of a wide range of flow equipment products and services. As part of the agreement, Cameron will provide Schlumberger IPM with all surface, subsea, drilling, measurement, compression and...Read More

Controls & Controllers, Fluid & Gas Flow Equipment, Machinery & Machining Tools, Mining, Oil Drilling & Refining, Services

FMC Technologies to Supply Subsea Systems for Pemex's Cantarell Project in the Gulf of Mexico

September 26, 2007

Houston, Texas, June 01, 2007 - FMC Technologies, Inc. (NYSE: FTI) announced today that its Mexican wholly owned subsidiary, FMC Technologies de Mexico, S.A. de C.V ("FMC Technologies"), has signed a contract with Pemex-Exploracion y Produccion to provide subsea completion services for the Cantarell project, located off the coast of the Yucatan Peninsula in the Bay of Campeche, Mexico. The...Read More

Services

ExxonMobil Advancement Cuts Drilling Time up to 35 Percent

November 30, 2006

IRVING, Texas --Nov. 1, 2005--Exxon Mobil Corporation (NYSE:XOM) announced today that its drilling organization has developed an optimization process that consistently reduces the time required to drill oil and gas wells by up to 35 percent. ExxonMobil's Fast Drill Process (FDP) achieves this breakthrough performance by using real-time, computer analysis of the drilling system's energy...Read More

Optics & Photonics, Services

NP Photonics Initiates Delivery of Optical Sensing Lasers

November 3, 2006

10/06/06 Systems will more than double the productivity of oil fields and significantly increase the security of harbors Tucson, Ariz., September 14, 2006 - NP Photonics Corporation, a world leader in the design and manufacture of narrow-linewidth single-frequency lasers, announced today that it has begun to deliver multi-laser systems for field trials in the oil field and security markets....Read More