OMAX Corp.
Kent, WA 98032
Jul 18, 2008 Measuring 265 x 152 in., Model 80X JetMachining® Center has Intelli-TRAX traction drive that enables expansion of cutting envelope to 20 ft. It features X-Y travel of 165 x 80 in., Intelli-MAX® Software, programmable motorized Z-axis with precision MAXJET® 5 Nozzle Assembly, high pressure direct drive pump, and rapid water level control for submerged cutting. System can calculate velocity of tool path at over 2,000 points/in., enabling complete control over motion of abrasivejet.

Packnet Ltd.
Burnsville, MN 55021
Jul 17, 2008 Precision cutting service utilizes WaterjetPRO(TM) CNC cutting system, which projects pressurized 0.004-0.050 in dia stream to cut detailed geometries in any design. Solution can produce tight, inside 90° angles and minimize material loss, allowing parts to be nested together tightly while also maximizing number of parts yielded from raw material. Service creates edges with little or no burr, no heat-affected zones, and no distortion/warping of materials.

Indigen Armor
Charlotte, NC 28206
Jun 11, 2008 Utilizing Flow 6012 Integrated Flying Bridge Water Jets, Indigen Armor specializes in working with armor, steel, ceramics, and ballistic glass. All common CAD file formats are accepted and parts can be digitized or programmed if necessary. With net cutting area of 6 x 12 ft, machines can cut material up to 10 in. thick with linear positional accuracy of +0.002 in. Company performs both abrasive and non-abrasive jobs, and all parts are nested to optimize material scrap rates.

GrayGlass
Queens Village, NY 11429
Jun 06, 2008 Made possible by precision CNC machining and water jet cutting capabilities, Patterned Glass is available in clear soda lime, low iron, and borosilicate from over 90 different styles and can be tempered or laminated for safety glazing. Decorative glass styles include clear, opaque, etched, colored, and mirror. Customizable for all engineering specifications, all glass styles are available for cutting and sizing, hole drilling, polishing, laminating, etching, and UV bonding.

MAG Fadal
Chatsworth,, CA 91311
Jun 03, 2008 Providing precision machining of mold and die parts, VMC 4525 combines 53.5 x 25 in. table with 15,000 rpm air/oil spindle and Infimatic Freedom NC(TM)200 control with integral CAD/CAM software package for Mold and Die. Designed for metal-cutting machine tool applications, NC 200 delivers 1,500 blocks/sec to precisely perform 2D and 3D contouring cuts at high speeds and feeds without lag, dwell, or run-on. NC 200 includes GibbsCAM SolidSurfacer®, servo loop closure, and PurePath(TM) algorithms.

Inrix, Inc.
WA 98033
May 28, 2008 Part of INRIX Connected Services, INRIX 3rd-generation Routing Engine combines real-time, predictive and historical traffic information, providing users with fastest-route calculations and origin-destination recommendations. Routing algorithms intelligently evaluate multiple routes and apply most relevant fusion of traffic information available, in time across each segment of roadway along route. Users can make choices based on what is happening on roads when they're actually on them.

Thuro Metal Products, Inc.
Brentwood, NY 11717
May 21, 2008 Precision machined and ground in any shape to any length, Complex Machined Shaft Components include threaded, bored, spindled, tapered, and eccentric shafts. Capabilities are: CNC turning machines up to 2½ in. bar diameter, Swiss and CNC Swiss automatics to 1¼ in. bar diameter, single spindle automatics to 2 3/8 in. bar diameter, and multi-spindle automatics to 3¼ in. bar diameter.

Thuro Metal Products, Inc.
Brentwood, NY 11717
Apr 25, 2008 Fittings and connectors, including Dynatube, Parker, and Statoflex Tube Fittings, are used in aerospace and aircraft applications. They can be made to engineering specs or from blueprint drawings, with tolerance held to ±.0001 in. and surface finishes down to 5 RMS. Specialties include machining Titanium and 17-4PH, and secondary capabilities include safety wire hole drilling. All products meet world class quality standards, ISO 9001:2000 Certified.

Hermle Machine Company
Franklin, WI 53132
Mar 12, 2008 Model B 300 5-axis vertical machining center features 5 m/s² acceleration in linear axes, 6 sec chip-to-chip tool change from 30-station magazine, and 15,000 rpm/19 kW spindle to assist when machining deep cavities. Linear axis travels are 800, 600, 500 mm for X, Y, and Z axis, respectively, rapid motion in linear axes is 30 m/min, and 2 rotary axis movements are 360° for various configurations of rotary table and ±110° for trunnion, maximum speeds being 15.5 and 10 rpm, respectively.

Cincinnati Incorporated
Cincinnati, OH 45211 0111
Mar 07, 2008 With 5,000 W frame-mounted GE Fanuc laser resonator, advanced cutting head, optics, and linear-motor-drive system, Model CL-850 laser cutting center delivers 1,000 ipm cutting on 18 ga steel and up to 1 1/8 in. processing range on mild steel. It is available in 5 x 10 and 6 x 12 ft cutting table models, each featuring dual quick-change pallets that move simultaneously. Models CL-840 and CL-825 come with 4,000 and 2,500 W of continuous power, respectively.

OMAX Corp.
Kent, WA 98032
Dec 12, 2007 Model 60120 JetMachining® Center abrasive waterjet cuts ceramics, composites, glass and stone, aluminum, tool steel, stainless steel, and titanium with accuracy of motion up to .003 in. It calculates velocity of tool path at over 2,000 points per inch, allowing for complete control over motion of abrasive jet. Unit features Compute First - Move Later motion control technology, abrasive feed system, MAXJET® 5 Diamond Nozzle Assembly, and ultra-high pressure direct drive pump.

Makino Inc.
Auburn Hills, MI 48326
Sep 28, 2007 Designed for shops manufacturing parts for aerospace, medical, and injection mold markets, SP and U series Wire EDMs feature SurfaceWIZARD(TM) technology that is suited for use in poor flushing conditions where nozzles cannot be sealed on work surface. SurfaceWIZARD is developed for tool steels up to 4 in. thick, eliminates witness lines, supports 0.008 and 0.010 in. dia wires, and maintains part straightness within 5 and 2.5 microns in 1- and 2-pass machining, respectively.

Photo Sciences, Inc.
Torrance, CA 90505
Aug 24, 2007 Using photo chemical milling process, Photo Sciences can etch holes as small as 2.5 µm completely through thin sheets of metal. Etched features on metal parts have smooth, well-defined edges, making them suited for deposition masks or as apertures for optical applications. Chemical milling process specifically allows sub micron tolerances and complex patterns, which can be combined with in house design, CAD, and photo tooling capabilities.

ClickSoftware Technologies Ltd
Burlington, MS 01803
Aug 09, 2007 Available as add-on feature to ClickSchedule and ClickMobile, Street-Level Routing Tool incorporates real-time traffic data so field technicians can avoid snarls that delay service, ensuring on-time arrivals. ClickSchedule and ClickMobile receive online traffic updates on an as-needed basis, and compare that information to GIS routes between jobs. If traffic updates indicate problem, ClickSchedule and ClickMobile can automatically reroute field technicians to faster path.

Gasser & Sons, Inc.
Commack, NY 11725
Jul 26, 2007 In-House Stamping Services offer exotic metals such as include Kovar, monel and titanium as well as standard materials like nickel, nickel alloys, brass, bronze copper, stainless steel, steel and lead. Features include 10-400 ton presses, and utilization of 3 different development processes namely casting, extrusion, and fabrication. Applications include X-ray housings, lead shielding, electronic casings, and X-ray tube components.

AdTech Ceramics Company
Chattanooga, TN 37405
Jun 19, 2007 Blending injection molding with HTCC alumina systems, capabilities include metallization with refractory metal or platinum conductors, nickel and gold plating as required, and ceramic material options. Metal components may be attached with high-temperature braze, and complex 3D shapes are possible without additional machining. Tooling turnaround promotes feasibility for prototype and small production runs of complex shapes.

Topco, Inc.
Elizabeth, NJ 07206
May 25, 2007 Deep Drawn Stampings can be manufactured from materials such as aluminum, steel, and brass, as well as other metals. Available tooling library will result in minimal initial tooling investment to develop new parts. Machinery also can perform small metal stamping parts such as: spring metal stampings, clip metal stampings, and cup metal stampings, produced with progressive dies, compound dies, or single operation dies. All parts are made to meet individual requirements.

Accura Technics LLC
Keene, NH 03431
Apr 17, 2007 MicroTol(TM) features configurable work area that is totally enclosed for coolant containment. Standard X-axis travel is 8 in., while standard Z-axis travel is 4 in. Work area consists of a hydraulic chuck supported by Accura(TM)'s hydrostatic work spindle and hydrostatic bearings that provide added damping. The 20,000 rpm air bearing wheel spindle is rigidly mounted to machine base on micro-adjustable column, and grinding is performed with metal bond diamond wheel.

80/20, Inc.
Columbia City, IN 46725
Jan 23, 2007 T-slotted profiles are designed for machine frames, office furniture, machine guards/ enclosures, motion picture fixtures/lighting, material handling equipment, and prototype equipment. Metric profiles are available in 4 or 6 m stock lengths, or cut to desired length with clear anodized finish.

PSI Peripheral Solutions Inc.
Mississauga, ON L5L 5Z4  Canada
Oct 06, 2006 Accommodating different sizes and thicknesses of materials, Large Capacity In-Feeder 3000 allows large range of items to be fed into boxes or totes along existing conveyor lines. Dual separation technology helps keep belt wear to minimum, enabling months of operation without changing belt. Able to handle up to 4,000 sheets of paper and feed 60 products/min, feeder handles everything from small reply cards to DVDs to full product catalogs.