Environmental Testing

Laboratory and Research Supplies & Equipment, Sensors, Monitors & Transducers, Services

Nanometrics to Set Up Texas-wide Earthquake Monitoring System

May 13, 2016

OTTAWA, – Nanometrics, the world's leader in seismic monitoring solutions, has signed a $1.98 million (US) contract to provide equipment and assist in deploying an earthquake monitoring system across the state of Texas. The TexNet Seismic Monitoring Program will allow for more precise determination of the location of earthquakes, and increase the ability for researchers to investigate... Read More

Services, Test & Measuring Instruments

Read about Confined Space in Construction and Atmospheric Testing Right Here!

November 20, 2015

In 1993, 29 CFR 1910.146 went into effect as the first federal legislation governing entry into permit-required confined spaces in general industry. Because some industries, such as the construction industry, were covered by specific Occupational Safety and Health Administration (OSHA) safety regulations, they were exempt from the confined space entry requirements of the general industry rule.... Read More

Services, Test & Measuring Instruments

Inspection Management Software aids food/beverage manufacturers.

October 20, 2015

Helping food and beverage manufacturers improve quality and efficiency, InspectionPro™ lets quality managers and inspectors use PC, tablet, or smartphone to manage pre-op inspections. Functionality enables complete and secure electronic capture of entire pre-op inspection process; reporting and analytics help drive continuous improvement; and FDA-validated records are automatically created and stored for audit and compliance. One-click UI streamlines inspection process. Read More

HVAC, Services, Test & Measuring Instruments

RGF Introduces State-of-the-Art HVAC Test Chamber

April 7, 2015

RIVIERA BEACH, FL — RGF Environmental Group unveils the newest addition to its already expansive in- house lab testing capabilities: a brand new ASHRAE-compliant HVAC testing chamber. This state-of-the-art air testing apparatus will allow RGF to test its newest products while still in development, as well as all existing HVAC IAQ products to both the current and future ASHRAE HVAC testing... Read More


Accredited IPX9K Testing is available for automotive products.

August 7, 2013

CertifiGroup ISO 17025 accredited laboratory offers IPX9K testing for automotive products, allowing manufacturers to certify equipment and enclosures for outdoor or harsh environments. Certified test reports are provided for manufacturers of any product that needs to meet Ingress Protection requirements. Able to be applied to range of equipment, IPX9K high-pressure steam jet cleaning test is highest/harshest level of water testing per IP Code system. Read More

Sensors, Monitors & Transducers, Services, Software, Test & Measuring Instruments, Green & Clean

Air Quality Monitor helps increase health care facility safety.

July 31, 2013

Used to monitor events which can create undesirable environmental air conditions, IC Sentinel distributed, networked sensor and software suite generates real-time and long-term air quality metrics in hospitals and healthcare facilities. Solution provides particulate level, differential room pressure, humidity, and CO2 level metrics related to control of airborne particulates. Monitor can also provide sound and light levels, which can be associated with patient satisfaction studies. Read More

Mounting & Attaching Products, Services, Test & Measuring Instruments, Green & Clean

MTS Seismic Simulation System Helps Japanese Company Prepare for Next Major Earthquake

April 22, 2013

EDEN PRAIRIE, Minn.– MTS Systems Corporation (NASDAQ: MTSC), a leading global supplier of high-performance test systems and position sensors, today announced it has developed the world's most advanced, large-scale, privately owned seismic test system for Kajima Corporation Technical Research in Tokyo, Japan. This massive custom MTS seismic system, referred to as the W-DECKER®, was... Read More

Cleaning Products & Equipment, Services, Test & Measuring Instruments

Practical Components to Offer Practical Products to the Cleaning Center at the IPC APEX Expo

February 11, 2013

Practical Components announces that some of its products will be featured by Bob Willis in the Printed Board Assembly Cleaning and Contamination Testing Center during the upcoming IPC APEX Expo, scheduled to take place February 19-21, 2013 at the San Diego Convention Center. Located in Booth #1549, the center will provide practical support to visitors keen to implement new cleaning and... Read More

Machinery & Machining Tools, Services, Test & Measuring Instruments

ESG Solutions Announces Successful Deployment of Innovative Microseismic Acquisition System for Research Consortium

January 14, 2013

CALGARY, Alberta- ESG Solutions, an industry leader in microseismic technology and services, is pleased to announce the successful deployment of its SuperCable(TM) microseismic acquisition system. In use by a Microseismic Research Consortium to monitor hydraulic fracturing operations in Western Canada, the system provides longer-term borehole acquisition at lower cost than traditional... Read More

Material Handling & Storage, Services, Green & Clean

Announcing Kaeser's Redesigned Air Main Charging Valve

December 10, 2012

Fredericksburg, Va. - Announcing Kaeser's redesigned Air Main Charging Valve! This uniquely Kaeser product reduces the exposure time of air treatment components to the elevated air velocities that exist while an air system is being pressurized. In many applications, exposure time can be reduced 50% or more.<4444>The AMCV automatically opens and closes to maintain a set minimum pressure in the... Read More

Controls & Controllers, Sensors, Monitors & Transducers, Services, Test & Measuring Instruments

Manage Your Temperature and Humidity Anytime, Anywhere

December 7, 2012

New Network Connected Monitoring and Alarming Devices from CAS DataLoggers<4444>CHESTERLAND OH - Available soon from CAS DataLoggers in partnership with T&D, our new network-connected TR-700W Series Temperature and Humidity Data Loggers are equipped with a built-in function that enables Internet connection (for example a LAN network) to save you time by automatically uploading and displaying all... Read More


HALT/HASS Testing accelerates time to market for products.

September 26, 2012

HALT (Highly Accelerated Life Test) and HASS (Highly Accelerated Stress Screen) testing uncover latent weaknesses in products by putting them through random vibration combined with rapid temperature transitions, subjecting product to increasing amounts of stress and fatigue. Multiple response channels and complete reporting capabilities are available. Led by HALT Testing expert Charlie Felkins, testing can reduce time to market for customers' products and increase their reliability. Read More


Indonesian Laboratory Helps Reduce Road Noise

September 6, 2012

Pusarpedal is an environmental laboratory under the Indonesian Environment Ministry, performing environmental quality testing and monitoring. <4444>It was established as an environment reference laboratory with grants from the Japanese government in 1993. It then received the testing laboratory accreditation certificate from the National Accreditation Committee (KAN) on February 7,... Read More


Easily Achieve Flight Qualification with X-ES Systems

February 27, 2012

About X-ES Extreme Engineering Solutions, Inc. (X-ES) designs and builds chassis, single-board computers, I/O, power, backplanes, system-level and custom products within the embedded computer industry. X-ES offers cutting-edge performance and flexibility in design, plus an unparalleled level of customer support and service. Please contact X-ES sales if you have any questions. Easily Achieve... Read More


Colorado Association for Manufacturing and Technology Recognizes Cascade TEK Front Range Test Facility for Innovative Product Testing

January 11, 2012

Longmont, Colorado - Environmental test provider Cascade TEK's Front Range environmental testing facility in Longmont, Colorado was recognized this month by the Colorado Association for Manufacturing and Technology (CAMT) for its innovative product testing services. The Colorado test facility began offering product reliability testing in July of 2011.<4444>"The response to the new Front Range... Read More

HVAC, Services, Waste Handling Equipment, Green & Clean

Classifier Milling Systems Adds CO2 Remediation Development to its Roster of Capabilities

June 3, 2011

Classifier Milling Systems Adds CO2 Remediation Development to its Roster of Capabilities <4444>Brampton, ON - June 2011 - Classifier Milling Systems' involvement with a significant and noteworthy CO2 remediation development project has far-reaching market implications. For plants utilizing coal for its power source, they can now use this dry process for capturing a percentage of CO2 present in... Read More


Environmental Testing combines temperature, vibration, RH.

February 18, 2009

Environmental testing and simulation services are offered through 30+ combined temperature/humidity chambers with electro-dynamic vibration facilities. Largest (25 x 15 x 15 ft drive-in) environmental test chamber is coupled with 240+ hp refrigeration, 240,000 KVA heat, and 42 KVA Steam Generator. RH can range from 2-100% in any test chamber, and metallurgical product testing services are also available. Vibration facilities handle 18,000 lbf loads, with frequencies up to 2,000 Hz. Read More

Sensors, Monitors & Transducers, Services

U.S Army And Enviance Deploy First Complete Greenhouse Gas Management System For Army Installation

June 16, 2008

Internet-based Compliance Management System Powers Efforts to Reduce Department of Defense's Carbon Footprint<4444>CARLSBAD, CA - June 9, 2008 - Enviance, the leading provider of Internet-based, on-demand systems for the management and automation of environmental, health and safety (EHS) compliance activities, today announced that the U.S. Army has implemented the first real-time greenhouse gas... Read More


NASA awards test and integration services contract.

January 11, 2008

Selected by NASA, Analex Corp of Fairfax, VA will provide environmental test and integration services to support projects at Goddard Space Flight Center and other NASA centers. Analex also will provide facility services, cable fabrication, optical services, and thermal blanket fabrication for variety of projects that may include Hubble Space Telescope, James Webb Space Telescope, Solar Dynamics Observatory, and Lunar Reconnaissance Orbiter. Read More

Sensors, Monitors & Transducers, Services, Test & Measuring Instruments

Analysis System creates detailed air usage profile.

August 8, 2006

Using data loggers and precision sensors, Air Demand Analysis System monitors and charts air flow, power consumption, system pressures, and air quality during normal operating hours over period of 10 days. Available for large and small systems, tool creates complete picture of air requirements, including relationship between peak and base load compressors and each compressor's duty cycle. Data enables trained specialists to identify areas for improvement. Read More