Analysis & Testing

Services

nProber III and Meridian 7 EFA Tools offer fault localization upto 7 and 10 nm.

November 11, 2016

Providing solution for fault isolation, electrical probing, delayering, sample preparation and imaging, atomic-level imaging in a transmission electron microscope (TEM), nProbe III enables FA engineers to extract thin samples for fault analysis in TEM. Offering certainty in CAD and navigation, Meridian 7 optical fault isolation tool provide less cross talk and higher waveform signal-to-noise.

Read More

Computer Hardware & Peripherals, Electronic Components & Devices, Services

CB51 Boards for CableEye surface mount and TH connectors.

November 8, 2016

Suitable for all CableEye adapter boards, CB51 includes 4 sets of 60 solder pads of aligned and staggered pins at 1.25 mm and 1.5 mm pitch. Flexible for use in various configurations and combinations, device includes four preset locations for automatic detection and display of any-pin-count connector up to 60-pins. Rated to 700 Vdc or 500 Vac, unit comes with optional PinMap™software and is compatible on all CableEye models.

Read More

Services

LabCorp is First US Laboratory to Offer Molecular Testing with New Fully Automated Cobas 8800 System from Roche

October 27, 2016

First high-throughput molecular platform approved for CLIA moderately complex testing expected to enhance quality, streamline workflow and better utilize staff INDIANAPOLIS, Oct. 24, 2016 - Roche (SIX: RO, ROG; OTCQX: RHHBY) and Laboratory Corporation of America Holdings (LabCorp) (NYSE:LH) announced today that the LabCorp Center for Esoteric Testing in Burlington, N.C., is the first site in...Read More

Laboratory and Research Supplies & Equipment, Materials & Material Processing, Services

Addivant(TM) Earns Formal Food-Contact Approval in Canada for Nonylphenol-Free Antioxidant, Weston 705

October 21, 2016

DANBURY, Conn., October 14, 2016 - Addivant™, the world’s leading supplier of liquid phosphite antioxidants for plastics, announced today that its nonylphenol-free stabilizer, WESTON 705, has received a letter of no objection from the Bureau of Chemical Safety within Health Canada’s Food Directorate allowing the material to be used in a broad range of food-contact applications. This...Read More

Services

Microseismic Analysis Service optimizes oil and gas recovery.

October 19, 2016

Using statistical approach to understanding seismicity and reservoir processes, Flow Dynamics Suite™ helps optimize hydraulic fracture efficiencies. Selection of dynamic parameters helps identify processes that play important roles in dynamic expansion of fracture network during hydraulic fracture stimulations while evaluating reservoir deformation efficiency. Information helps optimize completions; particularly focusing on wellbore placement, fracture containment, and stage spacing. Read More

Services, Test & Measuring Instruments, Transportation Industry Products

Sakor Technologies to Exhibit Engine, Hybrid and Electric Vehicle, and Battery Testing Technologies at Automotive Testing Expo North America 2016

October 12, 2016

VISIT BOOTH #10009 TO SEE RANGE OF HIGH-PERFORMANCE SYSTEMS SAKOR Technologies, Inc., a recognized leader in the area of high-performance dynamometer systems, announces that it will be exhibiting at the Automotive Testing Expo North America 2016, October 25-27, 2016 at the Suburban Collection Showplace in Novi, Michigan. SAKOR will be highlighting many of their innovative technologies at...Read More

Services, Test & Measuring Instruments

Testing Services validate integrity of materials.

September 22, 2016

With Material Validation Testing Center, company can verify identity and integrity of precision bar products, mitigating material risk. Equipment can test for internal and surface defects as well as alloy verification. This is important for industries where metal identification is critical to application such as aerospace and medical. Company can provide Ultrasonic Testing, Eddy Current Testing, and XRF Alloy Verification, as well as Laser marking with customer-specific identifiers. Read More

Services, Test & Measuring Instruments

MarqMetrix and Metrohm USA are Bringing the TouchRaman(TM) BallProbe and the Mira Handheld Together for More Accurate and Reliable Raman Measurements.

September 19, 2016

SEATTLE - MarqMetrix has developed the only TouchRaman spectroscopy measurement device and is partnering with Metrohm USA, a leading provider of laboratory and process instrumentation, to make Raman spectroscopy more accessible, accurate and reliable. The Metrohm Mira is a compact Raman spectrometer for rapid, nondestructive identification of samples from a variety of industries. The...Read More

Services, Test & Measuring Instruments

Presumptive Narcotic Field Testing Evolves with TacticID Handheld ID Instruments

September 15, 2016

NEWARK, Del. - BW Tek, an advanced instrumentation company that delivers lab quality Raman spectroscopy solutions through user-friendly mobile platforms, is proud to be setting precedents with instrumentation that radically advances narcotic field-testing protocols. The TacticID system has the industry's largest on-board library of narcotics, pharmaceutical pills and cutting agents along...Read More

Services

Inverter Testing/Certification bolsters grid interconnectivity.

September 13, 2016

Aiming to increase intelligence, safety, and reactivity of grid interconnection, Advanced Inverter Testing and Certification Program utilizes UL 1741 Supplement A (SA) to test and certify inverters and other utility interconnected distributed generation (DG) equipment for grid support functions. Smart, reactive control of DG supports ongoing modernization of grids utilizing increasing levels of DG and renewable energy resources. Average test time is <3 weeks. Read More

Mechanical Components & Assemblies, Services

Highly Filled Silicone for Sealing Headlights: Endurance Testing Proves Resistance to Wear of ViscoTec Stators

September 7, 2016

Endurance testing proves resistance to wear of ViscoTec stators A variety of dosing processes can be used in the manufacture of LEDs in the automotive sector. Alongside conventional potting of the LED chip, typical areas of application include the application of heat transfer paste for selective heat dissipation and the use of adhesives to join components. Modern LEDs are high-performance...Read More

Controls & Controllers, Electrical Equipment & Systems, Sensors, Monitors & Transducers, Services

AlsoEnergy Accelerates Push into Utility Scale PV Market

July 11, 2016

America's #1 solar monitoring provider in the CI markets offers the industry's most comprehensive solutions for utility-scale PV. BOULDER, Colo. - Over the past 5 years utility-scale PV has been the fastest-growing solar power market in the US. AlsoEnergy, the leading solar monitoring provider for commercial and industrial markets in the US, has gradually added new products and...Read More

Laboratory and Research Supplies & Equipment, Sensors, Monitors & Transducers, Services

Nanometrics to Set Up Texas-wide Earthquake Monitoring System

May 13, 2016

OTTAWA,– Nanometrics, the world's leader in seismic monitoring solutions, has signed a $1.98 million (US) contract to provide equipment and assist in deploying an earthquake monitoring system across the state of Texas. The TexNet Seismic Monitoring Program will allow for more precise determination of the location of earthquakes, and increase the ability for researchers to investigate...Read More

Services, Transportation Industry Products

Certifiable Predator B Completes Fuselage Integrity Testing

May 9, 2016

Major Step in Validating Aircraft Airworthiness Achieved SAN DIEGO – General Atomics Aeronautical Systems, Inc. (GA-ASI), a leading manufacturer of Remotely Piloted Aircraft (RPA) systems, radars, and electro-optic and related mission systems solutions, today announced that it has successfully completed fuselage structural integrity testing of its Certifiable Predator B (CPB) RPA. ...Read More

Sensors, Monitors & Transducers, Services, Software

Cloud-Based SaaS provides automated load management.

May 6, 2016

Designed for tablets and smartphones, PowerConnectSM Mobile provides streamlined automated performance of demand response actions, as well as automated monitoring and testing of emergency power supply systems across multiple locations. Users are provided with at-a-glance status of buildings' equipment and control/status points. They can use smartphone to start and stop curtailments, exclude specific equipment from curtailments and tests, and monitor and run generator tests. Read More

Electrical Equipment & Systems, Sensors, Monitors & Transducers, Services, Test & Measuring Instruments

Battery Element Tester detects latent insulator defects.

May 2, 2016

Using high voltage AC pulse test stimulus signal combined with all-digital, EMF feedback voltage measurement system, Model 1657 screens out defective insulators in lead acid batteries during manufacturing. Short duration, high voltage but low energy pulsed waveform eliminates risk of heating element under test, allowing for detection of insulator holes, tears, and missing separators without damage. USB interface is standard and RS232 is available for remote control and data collection. Read More

Laboratory and Research Supplies & Equipment, Machinery & Machining Tools, Services, Test & Measuring Instruments

Bruker Announces High-Performance and Cost-Effective NMR Solutions for the Pharmaceutical and Chemical Industries

April 14, 2016

PITTSBURGH– At the 57th Experimental Nuclear Magnetic Resonance Conference (www.enc-conference.org), Bruker (NASDAQ: BRKR) is showcasing several innovative drug discovery, drug development and process control solutions for small molecule NMR characterization in the chemical and pharmaceutical industries. -- AssureNMR with CRAFT: Now available...Read More

Services, Test & Measuring Instruments

DUNMORE Aerospace Contributes to FAA Research on Aircraft Fire and Cabin Safety

April 7, 2016

DUNMORE Aerospace provides valuable support to FAA to improve aircraft material testing protocols, contributing to advanced materials and safer air travel for future generations of aircraft. Bristol, PA - DUNMORE Aerospace, an industry leader in aerospace material development, today announced their test results are to be included in findings presented by the Federal Aviation Administration...Read More

Electrical Equipment & Systems, Services

First Solar, Inc. Successfully Completes The Atlas 25+ Testing Program

March 29, 2016

Mt. Prospect, IL – Atlas Material Testing Technology, LLC, the global leader in weathering technology and services, is pleased to announce that First Solar, Inc. has completed the rigorous Atlas 25+ Comprehensive PV Durability Testing program and received test result certification from Atlas’ partner SGS, the world’s leading inspection, verification, testing and certification company. ...Read More

Optics & Photonics, Services, Test & Measuring Instruments, Vision Systems

Acculogic Offers Production Test Systems and Services at EPTECH Montreal and Markham

March 23, 2016

Markham, ON – Acculogic Inc., a global leader in electronic production test solutions, announces that it will exhibit at EPTECH Montreal and EPTECH Markham. Acculogic will exhibit at the Montreal exhibition, scheduled to take place Tuesday, April 19 at the Holiday Inn Suites Pointe-Claire. The company also will exhibit at the Markham exhibition, scheduled to take place Thursday, April 21 at Le...Read More