Balluff, Inc.    Florence, KY 41042-0937
May 23, 2012 Micropulse® Generation 7 transducers are offered with Rapid Replacement Module (RRM) option that allows field replacement without removing pressure tube from hydraulic cylinder. With this option, transducer electronics and sensing element can be replaced as single unit while hydraulic seal remains intact. There is no danger of oil spillage during replacement, and there is no need for environmental containment procedures. Also, there is no danger of dirt/wood debris entering hydraulic port.

Measurement Specialties, Inc.    Hampton, VA 23666
May 08, 2012 Designed for liquid level measurement and control environments, LTA and LTB have pressure sensor assembly designed for hostile fluids and offer static accuracy of ±0.25% FSO over -4 to +140°F operating range. LTA has 1.0 in. body and ported nose cap design that protects stainless steel diaphragm from damage, while LTB has wide mouth non-fouling protective cage that protects 2.75 in. TFMR PTFE flexible diaphragm. Precalibrated pressure ranges include 0-5, 0-15, 0-30, and 0-50 psi.

Solartron Metrology    Gastonia, NC 28054
Mar 16, 2012 Featuring modular construction with stainless steel body and core carrier, SR Series is suited for challenging laboratory, test, and process control applications. Transducers, pressure tested to 100 bar, are available IP68-rated or hermetically sealed with extra screening against electrical interference. Submersible version comes with 3 m of FEP cable standard. Screw mount options are available, and standard mount versions are offered as free core or guided armature.

Ulvac Technologies, Inc.    Methuen, MA 01844
Sep 12, 2011 By incorporating signal from Pirani gauge SPU and Atmospheric sensor SAU, G-TRAN Series Multi ionization Gauge SH2 can connect 3 types of vacuum gauges with different measurement ranges. This separation type wide range vacuum gauge, in addition to being able to select gauge head to meet desired vacuum range by end-user, also enables field replacement of only failed gauge heads and measurement of range that covers atmospheric pressure to high vacuum (5 x 10-8Pa).

Paine Electronics, LLC    East Wenatchee, WA 98802
Feb 17, 2011 Designed to meet API 17F/ISO 13626-6 and CIA 443 requirements, Digital SubSea CANopen® Series provides intelligent CANopen® networking solution for pressure/temperature measurement. Series measures pressure from 0-10,000 psia with better than 0.04 psi resolution and temperature from +20 to +150°F with 0.5°F resolution. Constructed of all-welded titanium, transducers include micro Subconn® MCBH4F subsea connector. Alternate pressure ranges and port fittings are available to meet requirements.

Paine Electronics, LLC    East Wenatchee, WA 98802
Feb 16, 2011 Operating in temperatures from -40 to +260°F, 220-10-020 Series digital pressure and temperature combination transducer is offered in pressure ranges from 0-100 to 0-10,000 psis and provides temperature measurement from -40 to +300°F. Accuracy of digital pressure output is 0.075% FS, with resolution of 16 bits, while temperature resolution is 10 bits minimum and better than 0.5°F. Product requires input current of 25 mA at 5 Vdc, and includes RS485 interface for digital output.

Pressure Systems, Inc.    Hampton, VA 23666
Jan 12, 2011 Featuring Teflon®-coated elastomeric diaphragm with surface area of 0.90 in. to prevent clogging, KPSI Series 705 is available in custom level ranges from 6-115 ft H2O with analog outputs of 4-20 mA or 0-5 Vdc. Non-fouling submersible hydrostatic level transducer is compensated over temperature range of 23-122°F with static accuracy of ±0.25% FSO. Housed in welded 316 SS, Series 705 is suited for highly viscous applications, including lift stations, slurry and pump control.

Meggitt Sensing Systems (Endevco Corp.)    San Juan Capistrano, CA 92675
Nov 15, 2010 Offered in ranges of 15, 50, and 100 psig with 225 mV full scale output, Endevco® Model 8510C features non-linearity of less than 1% to 3X over-range with 4X minimum burst pressure and 20,000 g shock resistance. Miniature unit includes 4-arm strain gage bridge ion implanted into silicon diaphragm. With integral hybrid temperature compensation, transducer provides stable performance over temperature range of 0-200°F. Device has 10-32 UNF-2A mounting thread and comes with 30 in. cable.

Schweitzer Engineering Laboratories Inc.    Pullman, WA 99163
Sep 29, 2010 With SEL-734T, system operators can assess state of entire distribution system in real-time, isolate disturbances, and switch on power condition equipment by issuing remote commands. Instantaneous disturbance reporting helps minimize response times and prevent future disturbances. Providing seamless communications integration with optional Ethernet port and DNP3 communications protocol, transducer is available with fully sealed, NEMA-rated enclosure.

Hielscher USA, Inc.    Ringwood, NJ 07456
Aug 23, 2010 With typical flow rates from 2-10 m³/day, Model UIP2000hd is suited for liquid processing, including emulsification, dispersing, particle size reduction disintegration, extraction, and homogenizing. Processor supports sonotrode amplitudes up to 170 micron, liquid pressures to 10 bar, and liquid flow rates to 15 lpm. System delivers power at controlled amplitude level, so that magnitude of mechanical ultrasonic vibrations at sonotrode is constant under all load conditions.

ControlAir Inc.    Amherst, NH 03031 2315
Aug 11, 2010 Able to mount directly to common valve actuators, I/PAC (Integrated Process Air Control) assembly is offered with choice of explosion-proof, field-mounted I/P transducer that comes pre-assembled with filter regulator and pressure gauge. Tapped exhaust option enables use in natural gas applications, and field selectable outputs are 3-15, 3-25, 6-30, and 1-17 psig. Able to withstand harsh environments, product carries all agency hazardous area approvals from FM, CSA, and ATEX.

Meggitt Sensing Systems (Endevco Corp.)    San Juan Capistrano, CA 92675
Aug 02, 2010 Weighing only 2.3 g, Endevco® model 8530B series transducers are offered in ranges of 200, 500, and 1,000 psia with 300 mV full scale output and resonant frequencies of 750 and 1,000 kHz. They include self-contained full hybrid temperature compensation, and feature active four-arm strain gauge bridge, diffused into sculpted silicon diaphragm for max sensitivity and wideband frequency response. Operating at -18 to 93°C, units are rugged to 20,000 g shock and min 4X burst pressure.

Weber Ultrasonics USA    Clarkston, MI 48347
Jul 08, 2010 Operated manually or via remote control, SONIC DIGITAL 250 kHz Ultrasonic Generator provides power output of 250 and 500 W. Frequency is generated and controlled digitally, and power output can be set steplessly between 10-100%. In addition to intelligent cooling system, generator includes protection mechanisms against short circuiting, no-load operation, overloading, and overheating. Unit is compatible with SONOSUB submersible transducers and SONOPLATE plate transducers.

Stellar Technology, Inc.    Amherst, NY 14228
Jul 06, 2010 Designed for working pressures to 15,000 psi and seawater depths to 17,000 ft, PT36XX and can be configured as pressure only or temperature only unit. It is constructed of Inconel and 316 stainless steel with no external load-bearing welds and comes with multi-point NIST traceable calibration record. Available with of 3-24 in. probe lengths, unit can be specified with electrical outputs of 4-20 mA, 0-5 Vdc, 0-10 Vdc, and digital outputs including RS232, RS485, and CANbus.

Pressure Systems, Inc.    Hampton, VA 23666
Jul 01, 2010 Featuring MPU technology, TruBlue 555 Level is designed for long-term measurement of water levels in environmental and watershed management applications. Internal 3.6 V lithium battery, with on-board surge protection, has lifespan of 5 years based on 4 readings/hr, and 8 MB internal memory can store up to 550,000 level and temperature measurements. Offering accuracy of +0.1% FS total error band, transducer has multiple sampling modes with programmable rates up to 5 readings/sec.

Kistler Instrument Corp.    Amherst, NY 14228 2119
Jun 24, 2010 RoaDyn® S615 System 2000 6-component unit is based on 3 load cell concept and features carbon fiber reinforced plastic rim, rim ring, and wheel disk. Device allows maximum vertical load Fz of approximately 15 kN. Mounted on vehicle as complete wheel, it measures forces Fx, Fy, and Fz and torques Mx, My, and Mz on rotating wheel. Measurement signals are converted to digital in wheel electronics and transmitted to on-board electronics and output as analog or digital signals.

Stellar Technology, Inc.    Amherst, NY 14228
Jun 11, 2010 Featuring all welded stainless steel construction and weighing only 3.5 oz, miniature series FT290 covers ranges from 2,000-10,000 psia/psig and provides 3 mV/V full scale output with 10 Vdc excitation. It features operating temperature of -100 to +300°F and compensated temperature range of -65 to +250°F, infinite resolution, and low sensitivity to vibration/shock. Available with ¼ in. NPTM pressure fittings, each unit comes with 19 point calibration record traceable to NIST.

Paine Electronics, LLC    East Wenatchee, WA 98802
Feb 26, 2010 Consisting of microprocessor-based pressure and temperature transducer, Digital True Pressure Series can perform in highly corrosive environments. Unit is designed for pressure ranges of 0-5,000 to 0-30,000 psia and temperature measurement from -40 to +350°F. Featuring all-welded Inconel construction, device provides memory-based user access; RS-232, RS-485, I2C, or SPI interfaces; and programmable temperature output in °K, °F, or °C.

Stellar Technology, Inc.    Amherst, NY 14228
Feb 11, 2010 Designed for use in seawater and other submersible environments, including many corrosive liquids, LWU series transducers are available with stroke lengths from 0.5-4 in., linearity of ±1%, and operating temperature of -40 to 140°F. AC/AC unit LWU60X offers V/V output, while DC/DC models LWU61X and LWU65X provide outputs from ±5 or 0-10 Vdc and 4-20 mA, respectively. Made of 316 stainless steel, fully welded units with thru-hole design can endure 10 yr of submersion in seawater.

Setra Systems, Inc.    Boxborough, MA 01719
Jan 26, 2010 With compensated temperature range between -20 and 65°C and operating temperature range from -40 to 75°C, model 470T digital pressure transducer suits weather observation applications in extreme environmental conditions. Utilizing Setra's Setraceram (TM) sensor, and advanced digital electronic circuitry, microprocessor based instrument achieves system accuracy of better than +0.02% full scale, in pressure ranges from 0 to 10, 20, 50, and 100 psia; 600-1,100 or 800-1,100 mbar.