Dover Flexo Electronics, Inc.
Rochester, NH 03867
Oct 29, 2009 Powered by 24 Vdc, EasyView tension indicators amplify web tension signal from transducers installed in machine's web path. Web tension amplifier displays tension reading on analog or digital meter, while supplying isolated 0-to-10 Vdc tension signal output to PLC, drive, or controller. Zero and calibration settings are stored digitally, allowing stable and drift-free output over time and temperature variations. Full enclosure and open panel mount versions are available.

Mark-10 Corp.
Copiague, NY 11726
Oct 13, 2009 Offering all mechanical specifications of TSTM test stand, TST-DC/TSTMH-DC Motorized Torque Test Stand provides 100 lb-in. torque capacity. Modular unit includes fixture mounting plate and enables quick engagement and disengagement of samples. Stepper motor design prevents speed variation with load. Stand works with variety of force gauges offering capacities from 50 g full scale to 1,000 lb and capturing peak force in both tension and compression.

Mark-10 Corp.
Copiague, NY 11726
Aug 12, 2009 With rugged aluminum housing, RG smart load cell is designed for integration in to assembly systems, weighing systems, and process automation and testing automation applications. It is controlled by commands sent from PC/PLC thru its RS-232 connector. Device has ASCII command library that allows for functions including peak force recall, set points, data averaging, data filtering, and calibration. Module is offered in capacities of 2-200 lb.

Lloyd Instruments Ltd. Forum House
Hampshire Hants  United Kingdom
May 27, 2009 With measurement capacity of 1,124 lbf, TCD1100 can test tension, compression, shear, peel, flexural, constant load holds, creep, and cycling. Universal interface eliminates need for PC, and 10 different load cells are available depending on application. Unit consists of console, rugged frame, and intelligent load sensing system with measuring accuracies better than 0.1% FS. Frame operates from 0.01-1,020 mm/min with standard travel of 760 mm.

Mark-10 Corp.
Copiague, NY 11726
Feb 20, 2009 Used to help assess and ensure product quality, BGI Force/Torque Gauge can work with unlimited number of interchangeable remote sensors. Device supports programmable default configuration for each sensor and provides RS-232, Mitutoyo, and analog outputs. Plug-and-play operation eliminates need for calibration and setup, while GCL provides full computer control. Capable of sampling at rates to 65 readings/sec, instrument offers accuracy of ±0.1% of FS ±1 digit + sensor's accuracy.

Larson Systems Inc
Minneapolis, MN 55449
Dec 19, 2008 Spring Testing Automation Robot STAR 25 is available in compression model capable of handling up to 9 in. long parts and compression/extension model capable of testing parts up to 29 inches long - optional extension bridge assembly makes it possible to test springs 50 in. or longer. It has 3,000 lb drive, is equipped with load cells having 2 in. thru-rod capability for increased testing accuracy on larger springs, and incorporates built-in deflection compensation.

ADMET
Norwood, MA 02062
Oct 02, 2008 DForce low-force cyclic testing machine delivers high-speed tests in vertical and horizontal orientations with actuator strokes from 25-300 mm and 10 µm resolution. It is coupled with MTESTQuattro(TM) controller and software to provide precise closed loop force and displacement controls for dynamic fatigue testing to 15 Hz. Offering data acquisition, real-time plotting, and reporting, unit performs compression, tension, and flexural tests on biomaterials and medical devices.

Mecmesin Limited
Sterling, VA 20166
Sep 05, 2008 Available in 1 and 2.5 kN capacities, MultiTest-d test system works with digital force gauge to help evaluate quality control parameters of products in tension and compression. Potentiometer control enables fine-tuning of critical test variables such as speed, while LCD screen displays test settings and result information. Along with displacement as test measurement parameter, system supports automated operation, data-transfer capabilities, and graphing of force and deflection.

Quality Transmission Components
Garden City Park, NY 11040
Jul 01, 2008 Using sound waves instead of force deflection to measure belt tension, portable Model 507C produces repeatable results in seconds and can be used in almost any environment. Unit operates on four AAA batteries and is provided with cord sensor. Inductive sensor or flexible sensor are optionally available.

Instron
Norwood, MA 02062-2643
Apr 21, 2008 With capacity of 2,000 kN, SATEC(TM) Series 2000KN universal testing machine can perform tension, compression, and flexure tests on high strength materials including metals, fasteners, chain, wire, composites, wood, and concrete. Single test space provides different stroke lengths and extended test openings, while variable pressure hydraulic power supply reduces noise and heat generation. System can include optional open-faced high capacity grips.

Lloyd Instruments Ltd. Forum House
Hampshire Hants  United Kingdom
Dec 17, 2007 Materials testing fixture measures force required for carton erection from flat, folded carton blanks. Measurements can be used to set up operating conditions for automatic carton erection machines. Device has V-shaped grooved rollers which retain grip on box yet allow box axis to rotate as it opens. Designed for compression testing using LFPlus single column universal materials testing machine, it is suitable for use with range of carton blanks.

Instron
Norwood, MA 02062-2643
Nov 09, 2007 Exceeding many California Test Method standards, SATEC(TM) Series DX Compression System is equipped with automatic exudation detection for soils and audio prompting for stabilometer testing for asphalt and soils. As moisture is detected in soil sample by exudation fixture, PLC interface determines if exudation has occurred according to CTM 301. When exudation occurs, test will end automatically and load results are instantly reported in Partner(TM) software.

ADMET
Norwood, MA 02062
Sep 24, 2007 Providing testing up to 1,000 g maximum force, eXpert 5607 tabletop universal testing machine features crosshead speeds of up to 350 ipm. It offers precise measurement of low-force tests plus cyclic testing to 15 Hz when coupled with eP-DS dynamic servo controller. Users can program ramp, square, and triangular waveforms; adjust control gains and end point values; or activate amplitude control so eP-DS automatically adjusts to endpoint values.

Instron
Norwood, MA 02062-2643
Jul 30, 2007 Suited for production floor or QC environment, bundled system comes with Model 3345 testing machine, tensile wedge grips, flex fixtures, Dell® PC, and Bluehill® Lite Materials Testing software. System provides automatic recognition, balancing, and calibration of load and strain transducers, and uses dc servomotor with digital closed-loop position control to provide accurate crosshead speed control. It meets requirements of ASTM, EN, BS, ISO, and JIS testing standards.

Instron
Norwood, MA 02062-2643
Jun 29, 2007 Along with PLC interface, SATEC(TM) Series DX Compression System is equipped with automatic exudation detection for soils and audio prompting for stabilometer testing for asphalt and soils. Test automatically ends when exudation occurs, and load results are instantly reported in Partner(TM) software. Continuously collected data offers real-time measurements and graphs via software, which provides one-step testing mechanism and color-coded results display.

Instron
Norwood, MA 02062-2643
Mar 26, 2007 Designed to perform testing on tension and compression springs and other spring-type products, motorized SF1390 Series features floor-standing design with 2 lead screws and 2 precision guide columns. Servo drive controls frame's loading crosshead for fully automatic load testing with speeds up to 1,000 mm/min. Available in frame capacities of 11,250 and 22,500 lbf, system automatically corrects for height errors due to machine and load cell deflection.

Instron
Norwood, MA 02062-2643
Jan 12, 2007 Suited for quality control, tension, compression, and component testing, Model 3345 features TouchPanel controller that offers quick test and method-based testing mode for one-time tests and preconfigured test applications, respectively. Options include USB interfaces to printer, memory stick, and keyboard. QC Package is comprised of 5 kN (1,000 lbf) testing machine, 5 kN tensile wedge grips, and 2 compression platens.

MAGPOWR
Oklahoma City, OK 73114
Jan 05, 2007 Digital Tension Meter (DTM) displays web tension in applications where access to control parameters is not required or inconvenient for operator. LCD readout features 0.6 in. red digits and selectable decimal point. To ensure operation in wash-down or dusty environments, meter is constructed with high-impact plastic case and sealed front panel. DTM features DIN rail mounts and simplified wiring connections to facilitate installation.

Mitsubishi EDM/MC Machinery Systems, Inc.
Wood Dale, IL 60191
Dec 19, 2006 Available in digital and analog models, Wire Tension Meters confirm wire tension on EDM is exact, preserving part integrity. Analog meters check tensions from 5-5,000 g and include internal magnetic dampening, which promotes balanced movement for accurate readings in any position. Able to be read in g, N, or lb, digital meters have back-lit display that indicates tension value, battery level, and material being tested. Units automatically power off after 10 min on non-use.

ADMET
Norwood, MA 02062
Dec 18, 2006 Micro EP palm-sized universal testing machines are suited for determining mechanical properties of miniature specimens in tension, compression, or flexure. Each stage can be used as standalone tester or be installed in optical or atomic microscope to compare macroscopic stress-strain states with microscopic changes in material. Available in 450 N and 5 kN capacities, machines are equipped with load and displacement transducers as well as MTESTWindows Materials Testing System.